[PATCH v4 09/21] PM / devfreq: rockchip-dfi: Clean up DDR type register defines

Jonathan Cameron Jonathan.Cameron at Huawei.com
Tue May 16 09:01:46 PDT 2023


On Fri,  5 May 2023 13:38:44 +0200
Sascha Hauer <s.hauer at pengutronix.de> wrote:

> Use the HIWORD_UPDATE() define known from other rockchip drivers to
> make the defines look less odd to the readers who've seen other
> rockchip drivers.
> 
> Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
Whilst this might be fine, it's not a noop change.  So more
text needed to explain why it's fine to write the same 'mask' always
when previously only single bits were set in the mask.

> ---
>  drivers/devfreq/event/rockchip-dfi.c | 32 +++++++++++++++++-----------
>  1 file changed, 20 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/devfreq/event/rockchip-dfi.c b/drivers/devfreq/event/rockchip-dfi.c
> index 7896cd8beb143..035984d3c7b01 100644
> --- a/drivers/devfreq/event/rockchip-dfi.c
> +++ b/drivers/devfreq/event/rockchip-dfi.c
> @@ -26,15 +26,19 @@
>  
>  #define DMC_MAX_CHANNELS	2
>  
> +#define HIWORD_UPDATE(val, mask)	((val) | (mask) << 16)
> +
>  /* DDRMON_CTRL */
>  #define DDRMON_CTRL	0x04
> -#define CLR_DDRMON_CTRL	(0x1f0000 << 0)
> -#define LPDDR4_EN	(0x10001 << 4)
> -#define HARDWARE_EN	(0x10001 << 3)
> -#define LPDDR3_EN	(0x10001 << 2)
> -#define SOFTWARE_EN	(0x10001 << 1)
> -#define SOFTWARE_DIS	(0x10000 << 1)
> -#define TIME_CNT_EN	(0x10001 << 0)
> +#define DDRMON_CTRL_DDR4		BIT(5)
> +#define DDRMON_CTRL_LPDDR4		BIT(4)
> +#define DDRMON_CTRL_HARDWARE_EN		BIT(3)
> +#define DDRMON_CTRL_LPDDR23		BIT(2)
> +#define DDRMON_CTRL_SOFTWARE_EN		BIT(1)
> +#define DDRMON_CTRL_TIMER_CNT_EN	BIT(0)
> +#define DDRMON_CTRL_DDR_TYPE_MASK	(DDRMON_CTRL_DDR4 | \
> +					 DDRMON_CTRL_LPDDR4 | \
> +					 DDRMON_CTRL_LPDDR23)
>  
>  #define DDRMON_CH0_COUNT_NUM		0x28
>  #define DDRMON_CH0_DFI_ACCESS_NUM	0x2c
> @@ -74,16 +78,19 @@ static void rockchip_dfi_start_hardware_counter(struct devfreq_event_dev *edev)
>  	void __iomem *dfi_regs = dfi->regs;
>  
>  	/* clear DDRMON_CTRL setting */
> -	writel_relaxed(CLR_DDRMON_CTRL, dfi_regs + DDRMON_CTRL);
> +	writel_relaxed(HIWORD_UPDATE(0, 0xffff), dfi_regs + DDRMON_CTRL);
>  
>  	/* set ddr type to dfi */
>  	if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR3)
> -		writel_relaxed(LPDDR3_EN, dfi_regs + DDRMON_CTRL);
> +		writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR23, DDRMON_CTRL_DDR_TYPE_MASK),
> +			       dfi_regs + DDRMON_CTRL);
>  	else if (dfi->ddr_type == ROCKCHIP_DDRTYPE_LPDDR4)
> -		writel_relaxed(LPDDR4_EN, dfi_regs + DDRMON_CTRL);
Old value written is 0x10001 << 4 == 0x100010
> +		writel_relaxed(HIWORD_UPDATE(DDRMON_CTRL_LPDDR4, DDRMON_CTRL_DDR_TYPE_MASK),
> +			       dfi_regs + DDRMON_CTRL);
New value is (BIT(5) | BIT(4) | BIT(2)) | (BIT(4) << 16) 
0x100034

>  




More information about the linux-arm-kernel mailing list