[PATCH 10/10] ARM: mach-sunplus: Rework support and directory structure

Andrew Davis afd at ti.com
Mon May 15 09:02:34 PDT 2023


Having a platform need a mach-* directory should be seen as a negative,
it means the platform needs special non-standard handling. ARM64 support
does not allow mach-* directories at all. While we may not get to that
given all the non-standard architectures we support, we should still try
to get as close as we can and reduce the number of mach directories.

The mach-sunplus/ directory and files, provides just one "feature":
having the kernel print the machine name if the DTB does not also contain
a "model" string (which they always do). To reduce the number of mach-*
directories let's do without that feature and remove this directory.

Signed-off-by: Andrew Davis <afd at ti.com>
---
 MAINTAINERS                    |  1 -
 arch/arm/Kconfig               |  2 --
 arch/arm/Kconfig.platforms     | 29 +++++++++++++++++++++++++++++
 arch/arm/Makefile              |  1 -
 arch/arm/mach-sunplus/Kconfig  | 27 ---------------------------
 arch/arm/mach-sunplus/Makefile |  8 --------
 arch/arm/mach-sunplus/sp7021.c | 16 ----------------
 7 files changed, 29 insertions(+), 55 deletions(-)
 delete mode 100644 arch/arm/mach-sunplus/Kconfig
 delete mode 100644 arch/arm/mach-sunplus/Makefile
 delete mode 100644 arch/arm/mach-sunplus/sp7021.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 03ac2c37d22e..91d1ee89e275 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2855,7 +2855,6 @@ F:	Documentation/devicetree/bindings/interrupt-controller/sunplus,sp7021-intc.ya
 F:	Documentation/devicetree/bindings/reset/sunplus,reset.yaml
 F:	arch/arm/boot/dts/sunplus-sp7021*.dts*
 F:	arch/arm/configs/sp7021_*defconfig
-F:	arch/arm/mach-sunplus/
 F:	drivers/clk/clk-sp7021.c
 F:	drivers/irqchip/irq-sp7021-intc.c
 F:	drivers/reset/reset-sunplus.c
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 0024967b08ea..57f994497311 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -439,8 +439,6 @@ source "arch/arm/mach-sti/Kconfig"
 
 source "arch/arm/mach-stm32/Kconfig"
 
-source "arch/arm/mach-sunplus/Kconfig"
-
 source "arch/arm/mach-sunxi/Kconfig"
 
 source "arch/arm/mach-tegra/Kconfig"
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
index 60f2140c9ff2..892a5e309cea 100644
--- a/arch/arm/Kconfig.platforms
+++ b/arch/arm/Kconfig.platforms
@@ -159,6 +159,35 @@ config ARCH_RDA
 	help
 	  This enables support for the RDA Micro 8810PL SoC family.
 
+menuconfig ARCH_SUNPLUS
+	bool "Sunplus SoCs"
+	depends on ARCH_MULTI_V7
+	help
+	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
+	  such as the Banana Pi BPI-F2S development board (and derivatives).
+	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
+	  (<https://tibbo.com/store/plus1.html>)
+
+if ARCH_SUNPLUS
+
+config SOC_SP7021
+	bool "Sunplus SP7021 SoC support"
+	default ARCH_SUNPLUS
+	select HAVE_ARM_ARCH_TIMER
+	select ARM_GIC
+	select ARM_PSCI
+	select PINCTRL
+	select PINCTRL_SPPCTL
+	select SERIAL_SUNPLUS if TTY
+	select SERIAL_SUNPLUS_CONSOLE if TTY
+	help
+	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
+	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
+	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
+	  It is designed for industrial control.
+
+endif
+
 config ARCH_UNIPHIER
 	bool "Socionext UniPhier SoCs"
 	depends on ARCH_MULTI_V7
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index bab3d2485f80..ceadfa3c59fd 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -213,7 +213,6 @@ machine-$(CONFIG_ARCH_RENESAS)	 	+= shmobile
 machine-$(CONFIG_ARCH_INTEL_SOCFPGA)	+= socfpga
 machine-$(CONFIG_ARCH_STI)		+= sti
 machine-$(CONFIG_ARCH_STM32)		+= stm32
-machine-$(CONFIG_ARCH_SUNPLUS)		+= sunplus
 machine-$(CONFIG_ARCH_SUNXI)		+= sunxi
 machine-$(CONFIG_ARCH_TEGRA)		+= tegra
 machine-$(CONFIG_ARCH_U8500)		+= ux500
diff --git a/arch/arm/mach-sunplus/Kconfig b/arch/arm/mach-sunplus/Kconfig
deleted file mode 100644
index d0c2416e6f24..000000000000
--- a/arch/arm/mach-sunplus/Kconfig
+++ /dev/null
@@ -1,27 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-
-menuconfig ARCH_SUNPLUS
-	bool "Sunplus SoCs"
-	depends on ARCH_MULTI_V7
-	help
-	  Support for Sunplus SoC family: SP7021 and succeeding SoC-based systems,
-	  such as the Banana Pi BPI-F2S development board (and derivatives).
-	  (<http://www.sinovoip.com.cn/ecp_view.asp?id=586>)
-	  (<https://tibbo.com/store/plus1.html>)
-
-config SOC_SP7021
-	bool "Sunplus SP7021 SoC support"
-	depends on ARCH_SUNPLUS
-	default ARCH_SUNPLUS
-	select HAVE_ARM_ARCH_TIMER
-	select ARM_GIC
-	select ARM_PSCI
-	select PINCTRL
-	select PINCTRL_SPPCTL
-	select SERIAL_SUNPLUS if TTY
-	select SERIAL_SUNPLUS_CONSOLE if TTY
-	help
-	  Support for Sunplus SP7021 SoC. It is based on ARM 4-core
-	  Cortex-A7 with various peripherals (e.g.: I2C, SPI, SDIO,
-	  Ethernet, etc.), FPGA interface,  chip-to-chip bus.
-	  It is designed for industrial control.
diff --git a/arch/arm/mach-sunplus/Makefile b/arch/arm/mach-sunplus/Makefile
deleted file mode 100644
index d211de6af2db..000000000000
--- a/arch/arm/mach-sunplus/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-
-obj-$(CONFIG_SOC_SP7021)	+= sp7021.o
diff --git a/arch/arm/mach-sunplus/sp7021.c b/arch/arm/mach-sunplus/sp7021.c
deleted file mode 100644
index 774d0a5bd4eb..000000000000
--- a/arch/arm/mach-sunplus/sp7021.c
+++ /dev/null
@@ -1,16 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-/*
- * Copyright (C) Sunplus Technology Co., Ltd.
- *       All rights reserved.
- */
-#include <linux/kernel.h>
-#include <asm/mach/arch.h>
-
-static const char *sp7021_compat[] __initconst = {
-	"sunplus,sp7021",
-	NULL
-};
-
-DT_MACHINE_START(SP7021_DT, "SP7021")
-	.dt_compat	= sp7021_compat,
-MACHINE_END
-- 
2.39.2




More information about the linux-arm-kernel mailing list