[PATCH v3 0/2] arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes

[Apurva Nandan]

On 04/05/23 13:33, Apurva Nandan wrote:
> From: Vaishnav Achath <vaishnav.a at ti.com>
>
> J784S4 has S28HS512T OSPI flash connected to OSPI0 and MT25QU512A QSPI
> flash connected to OSPI1, enable support for the same.
>
> Changes in v3:
> - Split the SoC dtsi changes and EVM dts changes into separate patches
> - Added QSPI flash node and partition information in EVM dts
> - Removed address-cells = <1>; and size-cells = <1>; in OSPI0 flash node
> - Add flash partition information for OSPI flash.
Link to v2 patch: 
https://lore.kernel.org/linux-arm-kernel/20230329060057.13654-1-a-nandan@ti.com/
> Changes in v2:
> - Fixed address 0x0 to 0x00
> - Fixed dtbs_check errors (removed syscon and created simple bus)
> - Fixed whitespace error
Link to v1 patch: 
https://lore.kernel.org/linux-arm-kernel/20230327082924.12427-1-a-nandan@ti.com/
> Apurva Nandan (2):
>    arm64: dts: ti: k3-j784s4-mcu-wakeup: Add FSS OSPI0 and FSS OSPI1
>    arm64: dts: ti: k3-j784s4-evm: Add support for OSPI and QSPI flashes
>
>   arch/arm64/boot/dts/ti/k3-j784s4-evm.dts      | 158 ++++++++++++++++++
>   .../boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi     |  41 +++++
>   2 files changed, 199 insertions(+)
>
-- 
Thanks and regards,
Apurva Nandan,
Texas Instruments India.