[PATCH 2/2] arm64: dts: add NXP i.MX8MM-EVKB support

Marco Felsch m.felsch at pengutronix.de
Wed May 3 08:20:05 PDT 2023


From: Johannes Schneider <johannes.schneider at leica-geosystems.com>

Add the i.MX8MM-EVKB [1] devicetree support. The EVKB is basically the
same device except for the different used PMIC.

[1] https://www.nxp.com/design/development-boards/ \
        i-mx-evaluation-and-development-boards/ \
	evaluation-kit-for-the-i-mx-8m-mini-applications-processor:8MMINILPD4-EVK

Signed-off-by: Johannes Schneider <johannes.schneider at leica-geosystems.com>
[m.felsch at pengutronix.de: Adapt the commit message]
[m.felsch at pengutronix.de: Include Shawns feedback]
[m.felsch at pengutronix.de: Fix the regulator settings]
Signed-off-by: Marco Felsch <m.felsch at pengutronix.de>
---
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 arch/arm64/boot/dts/freescale/imx8mm-evkb.dts | 128 ++++++++++++++++++++++++++
 2 files changed, 129 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 198fff3731ae..a054313761a4 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -55,6 +55,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-emcon-avari.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-evkb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-innocomm-wb15-evk.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
new file mode 100644
index 000000000000..164df627a213
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evkb.dts
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019-2020 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8mm-evk.dtsi"
+
+/ {
+	model = "FSL i.MX8MM EVKB";
+	compatible = "fsl,imx8mm-evkb", "fsl,imx8mm";
+};
+
+&i2c1 {
+	/delete-node/ pmic at 4b;
+
+	pmic at 25 {
+		compatible = "nxp,pca9450a";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* VDD_SOC with PCIe */
+			buck1_reg: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* VDD_ARM */
+			buck2_reg: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			/* VDD_GPU, VDD_VPU, VDD_DRAM */
+			buck3_reg: BUCK3 {
+				regulator-name = "BUCK3";
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_3V3 */
+			buck4_reg: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_1V8, NVCC_1V8, NVCC_ENET */
+			buck5_reg: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_DRAM for LPDDR4 */
+			buck6_reg: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SNVS_1P8 */
+			ldo1_reg: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_SNVS_0P8 */
+			ldo2_reg: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_*_1V8 */
+			ldo3_reg: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* VDD_PHY_0V9 */
+			ldo4_reg: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* NVCC_SD2 */
+			ldo5_reg: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+		};
+	};
+};

-- 
2.39.2




More information about the linux-arm-kernel mailing list