[PATCH v2] arm64: dts: mediatek: Add cpufreq nodes for MT8192
Allen-KH Cheng (程冠勳)
Allen-KH.Cheng at mediatek.com
Fri Mar 3 03:36:46 PST 2023
Hi Angelo,
On Fri, 2023-03-03 at 12:23 +0100, AngeloGioacchino Del Regno wrote:
> Il 03/03/23 03:00, Allen-KH Cheng ha scritto:
> > Add the cpufreq nodes for MT8192 SoC.
> >
> > Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
> > ---
> > Change in v1:
> > Fix : this should be <&performance 0>
>
> I didn't say that *all of them should be <&performance 0>.
>
> It's 0 for the cortex-a55 CPUs and it's 1 for the A76 CPUs.
>
> Please fix it.
>
>
Oh, sorry for my misunderstanding
I will fix it in next version.
BRs,
Allen
>
> > [Allen-KH Cheng <allen-kh.cheng at mediatek.com>]
> > ---
> > ---
> > arch/arm64/boot/dts/mediatek/mt8192.dtsi | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > index 87b91c8feaf9..48a4fc88fde4 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
> > @@ -70,6 +70,7 @@
> > d-cache-line-size = <64>;
> > d-cache-sets = <128>;
> > next-level-cache = <&l2_0>;
> > + performance-domains = <&performance 0>;
> > capacity-dmips-mhz = <530>;
> > };
> >
> > @@ -87,6 +88,7 @@
> > d-cache-line-size = <64>;
> > d-cache-sets = <128>;
> > next-level-cache = <&l2_0>;
> > + performance-domains = <&performance 0>;
> > capacity-dmips-mhz = <530>;
> > };
> >
> > @@ -104,6 +106,7 @@
> > d-cache-line-size = <64>;
> > d-cache-sets = <128>;
> > next-level-cache = <&l2_0>;
> > + performance-domains = <&performance 0>;
> > capacity-dmips-mhz = <530>;
> > };
> >
> > @@ -121,6 +124,7 @@
> > d-cache-line-size = <64>;
> > d-cache-sets = <128>;
> > next-level-cache = <&l2_0>;
> > + performance-domains = <&performance 0>;
> > capacity-dmips-mhz = <530>;
> > };
>
> It's 0 until there.
>
> >
> > @@ -138,6 +142,7 @@
> > d-cache-line-size = <64>;
> > d-cache-sets = <256>;
> > next-level-cache = <&l2_1>;
> > + performance-domains = <&performance 0>;
>
> Here, and later (for cortex-a76), it's <&performance 1>.
>
>
> Regards,
> Angelo
>
More information about the linux-arm-kernel
mailing list