[PATCH 00/11] clk: at91: add support for parent_data and parent_hw

[Claudiu.Beznea at microchip.com]

On 15.06.2023 12:32, Claudiu Beznea wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> Hi,
> 
> Series adds support for parent data and parent_hw on AT91 clock drivers
> used on SAMA7G5. As the drivers are shared with other AT91 SoC at the
> moment the parent names support is preserved and will eventually be
> removed when all the AT91 SoC clock drivers will be converted to use
> parent_data, parent_hw. For the moment the series does the conversion
> for SAMA7G5. Eventually, subsequent patches will adapt the other AT91
> SoC clocks.
> 
> Series has been tested on SAM9X60, SAMA5D2 and SAMA7G5 SoCs.
> 
> Thank you,
> Claudiu Beznea
> 
> PS: along with this I've added patch 11/11 that fixes a typo.
> 
> Claudiu Beznea (11):
>   clk: at91: clk-main: add support for parent_data/parent_hw
>   clk: at91: clk-generated: add support for parent_hw
>   clk: at91: clk-master: add support for parent_hw
>   clk: at91: clk-peripheral: add support for parent_hw
>   clk: at91: clk-programmable: add support for parent_hw
>   clk: at91: clk-system: add support for parent_hw
>   clk: at91: clk-utmi: add support for parent_hw
>   clk: at91: clk-sam9x60-pll: add support for parent_hw
>   clk: at91: sckc: switch to parent_data/parent_hw
>   clk: at91: sama7g5: switch to parent_hw and parent_data
>   clk: at91: sama7g5: s/ep_chg_chg_id/ep_chg_id

Applied to clk-microchip, thanks!