[PATCH v4 2/6] phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate

Jonas Karlman jonas at kwiboo.se
Thu Jun 15 10:10:19 PDT 2023


From: Zheng Yang <zhengyang at rock-chips.com>

inno_hdmi_phy_rk3328_clk_recalc_rate() is returning a rate not found
in the pre pll config table when the fractal divider is used.
This can prevent proper power_on because a tmdsclock for the new rate
is not found in the pre pll config table.

Fix this by saving and returning a rounded pixel rate that exist
in the pre pll config table.

Fixes: 53706a116863 ("phy: add Rockchip Innosilicon hdmi phy")
Signed-off-by: Zheng Yang <zhengyang at rock-chips.com>
Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v3:
- no change

 drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
index f348e5347d81..7d412f771f6c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-hdmi.c
@@ -745,10 +745,12 @@ unsigned long inno_hdmi_phy_rk3328_clk_recalc_rate(struct clk_hw *hw,
 		do_div(vco, (nd * (no_a == 1 ? no_b : no_a) * no_d * 2));
 	}
 
-	inno->pixclock = vco;
-	dev_dbg(inno->dev, "%s rate %lu\n", __func__, inno->pixclock);
+	inno->pixclock = DIV_ROUND_CLOSEST((unsigned long)vco, 1000) * 1000;
 
-	return vco;
+	dev_dbg(inno->dev, "%s rate %lu vco %llu\n",
+		__func__, inno->pixclock, vco);
+
+	return inno->pixclock;
 }
 
 static long inno_hdmi_phy_rk3328_clk_round_rate(struct clk_hw *hw,
-- 
2.40.1




More information about the linux-arm-kernel mailing list