[PATCH v3 1/3] dt-bindings: thermal: sun8i: Add binding for D1/T113s THS controller

Maksim Kiselev bigunclemax at gmail.com
Sat Jun 10 13:42:18 PDT 2023


From: Maxim Kiselev <bigunclemax at gmail.com>

Add a binding for D1/T113s thermal sensor controller.

Signed-off-by: Maxim Kiselev <bigunclemax at gmail.com>
---
 .../thermal/allwinner,sun8i-a83t-ths.yaml     | 20 ++++++++++++++++++-
 1 file changed, 19 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index fbd4212285e2..001faa37fc27 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -16,6 +16,7 @@ properties:
       - allwinner,sun8i-a83t-ths
       - allwinner,sun8i-h3-ths
       - allwinner,sun8i-r40-ths
+      - allwinner,sun20i-d1-ths
       - allwinner,sun50i-a64-ths
       - allwinner,sun50i-a100-ths
       - allwinner,sun50i-h5-ths
@@ -61,6 +62,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h6-ths
 
@@ -84,7 +86,9 @@ allOf:
       properties:
         compatible:
           contains:
-            const: allwinner,sun8i-h3-ths
+            enum:
+              - allwinner,sun8i-h3-ths
+              - allwinner,sun20i-d1-ths
 
     then:
       properties:
@@ -103,6 +107,7 @@ allOf:
             enum:
               - allwinner,sun8i-h3-ths
               - allwinner,sun8i-r40-ths
+              - allwinner,sun20i-d1-ths
               - allwinner,sun50i-a64-ths
               - allwinner,sun50i-a100-ths
               - allwinner,sun50i-h5-ths
@@ -159,4 +164,17 @@ examples:
          #thermal-sensor-cells = <1>;
     };
 
+  - |
+    thermal-sensor at 2009400 {
+          compatible = "allwinner,sun20i-d1-ths";
+          reg = <0x02009400 0x400>;
+          interrupts = <0 90 0>;
+          clocks = <&ccu 0>;
+          clock-names = "bus";
+          resets = <&ccu 2>;
+          nvmem-cells = <&ths_calibration>;
+          nvmem-cell-names = "calibration";
+          #thermal-sensor-cells = <0>;
+    };
+
 ...
-- 
2.39.2




More information about the linux-arm-kernel mailing list