[PATCH v4 09/10] tools: lib: perf: Implement riscv mmap support
Ian Rogers
irogers at google.com
Mon Jul 31 08:10:12 PDT 2023
On Mon, Jul 31, 2023 at 3:27 AM Alexandre Ghiti <alexghiti at rivosinc.com> wrote:
>
> On Mon, Jul 31, 2023 at 12:15 PM Alexandre Ghiti <alexghiti at rivosinc.com> wrote:
> >
> > Hi Ian,
> >
> > On Fri, Jul 28, 2023 at 7:53 PM Ian Rogers <irogers at google.com> wrote:
> > >
> > > On Thu, Jul 27, 2023 at 7:28 AM Alexandre Ghiti <alexghiti at rivosinc.com> wrote:
> > > >
> > > > riscv now supports mmaping hardware counters so add what's needed to
> > > > take advantage of that in libperf.
> > > >
> > > > Signed-off-by: Alexandre Ghiti <alexghiti at rivosinc.com>
> > > > Reviewed-by: Andrew Jones <ajones at ventanamicro.com>
> > > > Reviewed-by: Atish Patra <atishp at rivosinc.com>
> > > > ---
> > > > tools/lib/perf/mmap.c | 65 +++++++++++++++++++++++++++++++++++++++++++
> > > > 1 file changed, 65 insertions(+)
> > > >
> > > > diff --git a/tools/lib/perf/mmap.c b/tools/lib/perf/mmap.c
> > > > index 0d1634cedf44..378a163f0554 100644
> > > > --- a/tools/lib/perf/mmap.c
> > > > +++ b/tools/lib/perf/mmap.c
> > > > @@ -392,6 +392,71 @@ static u64 read_perf_counter(unsigned int counter)
> > > >
> > > > static u64 read_timestamp(void) { return read_sysreg(cntvct_el0); }
> > > >
> > > > +#elif __riscv_xlen == 64
> > >
> > > This is something of an odd guard, perhaps:
> > > #elif defined(__riscv) && __riscv_xlen == 64
> > >
> > > That way it is more intention revealing that this is riscv code. Could
> > > you add a comment relating to the __riscv_xlen ?
> >
> > I guess Andrew answered that already.
> >
Not sure. I still think it looks weird:
...
#if defined(__i386__) || defined(__x86_64__)
...
#elif defined(__aarch64__)
...
#elif __riscv_xlen == 64
...
#else
static u64 read_perf_counter(unsigned int counter __maybe_unused) { return 0; }
static u64 read_timestamp(void) { return 0; }
#endif
The first two are clearly #ifdef-ing architecture specific assembly
code, under what conditions I get RISC-V code ¯\(ツ)/¯ At least worth
a comment like "csrr is only available when you have xlens of 64
because ..."
> > >
> > > > +
> > > > +/* TODO: implement rv32 support */
> > > > +
> > > > +#define CSR_CYCLE 0xc00
> > > > +#define CSR_TIME 0xc01
> > > > +
> > > > +#define csr_read(csr) \
> > > > +({ \
> > > > + register unsigned long __v; \
> > > > + __asm__ __volatile__ ("csrr %0, " #csr \
> > > > + : "=r" (__v) : \
> > > > + : "memory"); \
> > >
> > > To avoid the macro pasting that could potentially go weird, could this be:
> > >
> > > __asm__ __volatile__ ("csrr %0, %1",
> > > : "=r"(__v) /* outputs */
> > > : "i"(csr) /* inputs */
> > > : "memory" /* clobbers */)
>
> Forgot to answer this one: it compiles, but I have to admit that I
> don't understand the difference and if that's correct (all macros in
> arch/riscv/include/asm/csr.h use # to do this) and what benefits it
> brings. Can you elaborate more on things that could "go weird"?
So rather than use an input constraint for the asm block you are using
the C preprocessor to paste in the csr argument. If csr is something
like "1" then it looks good and you'll get "csrr %0,1". If you pass
something like "1 << 31" then that will be pasted as "csrr %0, 1 <<
31" and that starts to get weird in the context of being in the
assembler where it is unlikely the C operators work. Using the input
constraint avoids this, causes the C compiler to check the type of the
argument and you'll probably get more intelligible error messages as a
consequence.
>
> Thanks again,
>
> Alex
>
> > >
> > > Also, why is this clobbering memory? Worth adding a comment.
> >
> > No idea, I see that it is also done this way in
> > arch/riscv/include/asm/csr.h. @Atish Kumar Patra , @Palmer Dabbelt ?
It would seem to make sense then not to have a memory constraint until
we know why we're doing it?
Thanks,
Ian
> >
> > Thanks for your comments!
> >
> > Alex
> >
> > >
> > > Thanks,
> > > Ian
> > >
> > > > + __v; \
> > > > +})
> > > > +
> > > > +static unsigned long csr_read_num(int csr_num)
> > > > +{
> > > > +#define switchcase_csr_read(__csr_num, __val) {\
> > > > + case __csr_num: \
> > > > + __val = csr_read(__csr_num); \
> > > > + break; }
> > > > +#define switchcase_csr_read_2(__csr_num, __val) {\
> > > > + switchcase_csr_read(__csr_num + 0, __val) \
> > > > + switchcase_csr_read(__csr_num + 1, __val)}
> > > > +#define switchcase_csr_read_4(__csr_num, __val) {\
> > > > + switchcase_csr_read_2(__csr_num + 0, __val) \
> > > > + switchcase_csr_read_2(__csr_num + 2, __val)}
> > > > +#define switchcase_csr_read_8(__csr_num, __val) {\
> > > > + switchcase_csr_read_4(__csr_num + 0, __val) \
> > > > + switchcase_csr_read_4(__csr_num + 4, __val)}
> > > > +#define switchcase_csr_read_16(__csr_num, __val) {\
> > > > + switchcase_csr_read_8(__csr_num + 0, __val) \
> > > > + switchcase_csr_read_8(__csr_num + 8, __val)}
> > > > +#define switchcase_csr_read_32(__csr_num, __val) {\
> > > > + switchcase_csr_read_16(__csr_num + 0, __val) \
> > > > + switchcase_csr_read_16(__csr_num + 16, __val)}
> > > > +
> > > > + unsigned long ret = 0;
> > > > +
> > > > + switch (csr_num) {
> > > > + switchcase_csr_read_32(CSR_CYCLE, ret)
> > > > + default:
> > > > + break;
> > > > + }
> > > > +
> > > > + return ret;
> > > > +#undef switchcase_csr_read_32
> > > > +#undef switchcase_csr_read_16
> > > > +#undef switchcase_csr_read_8
> > > > +#undef switchcase_csr_read_4
> > > > +#undef switchcase_csr_read_2
> > > > +#undef switchcase_csr_read
> > > > +}
> > > > +
> > > > +static u64 read_perf_counter(unsigned int counter)
> > > > +{
> > > > + return csr_read_num(CSR_CYCLE + counter);
> > > > +}
> > > > +
> > > > +static u64 read_timestamp(void)
> > > > +{
> > > > + return csr_read_num(CSR_TIME);
> > > > +}
> > > > +
> > > > #else
> > > > static u64 read_perf_counter(unsigned int counter __maybe_unused) { return 0; }
> > > > static u64 read_timestamp(void) { return 0; }
> > > > --
> > > > 2.39.2
> > > >
More information about the linux-arm-kernel
mailing list