[PATCH v8 15/16] media: dt-bindings: Add TI J721E CSI2RX

[Jai Luthra]

Hi Rob,

On 31/07/23 15:01, Rob Herring wrote:
> 
> On Mon, 31 Jul 2023 13:59:33 +0530, Jai Luthra wrote:
>> From: Pratyush Yadav <p.yadav at ti.com>
>>
>> TI's J721E uses the Cadence CSI2RX and DPHY peripherals to facilitate
>> capture over a CSI-2 bus. The TI CSI2RX platform driver glues all the
>> parts together.
>>
>> Signed-off-by: Pratyush Yadav <p.yadav at ti.com>
>> Signed-off-by: Jai Luthra <j-luthra at ti.com>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> Reviewed-by: Rob Herring <robh at kernel.org>
>> ---
>> v7->v8:
>> - Drop "Device Tree Bindings" from title
>> - Rename "Wrapper" to "Shim" in title as that is the name referred in
>>    the TRM and other places
>> - Update maintainer to myself
>> - Drop items from compatible as only a single element is present
>> - Rename compatible to "ti,j721e-csi2rx-shim" to distinguish from the
>>    SoC-specific CSI2RX bridge compatible
>>
>>   .../bindings/media/ti,j721e-csi2rx-shim.yaml       | 100 +++++++++++++++++++++
>>   1 file changed, 100 insertions(+)
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.yaml:
> Error in referenced schema matching $id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: ticsi2rx at 4500000: csi-bridge at 4504000: False schema does not allow {'compatible': ['ti,j721e-csi2rx', 'cdns,csi2rx'], 'reg': [[72368128, 4096]], 'clocks': [[4294967295, 26, 2], [4294967295, 26, 0], [4294967295, 26, 2], [4294967295, 26, 2], [4294967295, 26, 3], [4294967295, 26, 3]], 'clock-names': ['sys_clk', 'p_clk', 'pixel_if0_clk', 'pixel_if1_clk', 'pixel_if2_clk', 'pixel_if3_clk'], 'phys': [[4294967295]], 'phy-names': ['dphy'], 'ports': {'#address-cells': [[1]], '#size-cells': [[0]], 'port at 0': {'reg': [[0]], 'endpoint': {'remote-endpoint': [[4294967295]], 'bus-type': [[4]], 'clock-lanes': [[0]], 'data-lanes': [[1, 2]]}}}}
> 	from schema $id: http://devicetree.org/schemas/media/ti,j721e-csi2rx-shim.yaml#
> Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: /example-0/ticsi2rx at 4500000/csi-bridge at 4504000: failed to match any schema with compatible: ['ti,j721e-csi2rx', 'cdns,csi2rx']
> Documentation/devicetree/bindings/media/ti,j721e-csi2rx-shim.example.dtb: /example-0/ticsi2rx at 4500000/csi-bridge at 4504000: failed to match any schema with compatible: ['ti,j721e-csi2rx', 'cdns,csi2rx']
> 
> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20230731-upstream_csi-v8-15-fb7d3661c2c9@ti.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.

Sorry I missed this warning from v7.

This patch depends on 9536cc949235 ("media: dt-bindings: cadence-csi2rx: 
Convert to DT schema") which is part of linux-next.

The base for this series should be linux-next/master 
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git 
instead of 6.5-rc1.

> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

-- 
Thanks,
Jai

GPG Fingerprint: 4DE0 D818 E5D5 75E8 D45A AFC5 43DE 91F9 249A 7145