[PATCH V3 7/8] genpd: imx: scu-pd: add multi states support
Peng Fan (OSS)
peng.fan at oss.nxp.com
Sun Jul 30 23:47:45 PDT 2023
From: Peng Fan <peng.fan at nxp.com>
Add multi states support, this is to support devices could run in LP mode
when runtime suspend, and OFF mode when system suspend.
Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
drivers/genpd/imx/scu-pd.c | 48 ++++++++++++++++++++++++++++++++++++--
1 file changed, 46 insertions(+), 2 deletions(-)
diff --git a/drivers/genpd/imx/scu-pd.c b/drivers/genpd/imx/scu-pd.c
index 2f693b67ddb4..30da101119eb 100644
--- a/drivers/genpd/imx/scu-pd.c
+++ b/drivers/genpd/imx/scu-pd.c
@@ -65,6 +65,12 @@
#include <linux/pm_domain.h>
#include <linux/slab.h>
+enum {
+ PD_STATE_LP,
+ PD_STATE_OFF,
+ PD_STATE_MAX
+};
+
/* SCU Power Mode Protocol definition */
struct imx_sc_msg_req_set_resource_power_mode {
struct imx_sc_rpc_msg hdr;
@@ -368,7 +374,8 @@ static int imx_sc_pd_power(struct generic_pm_domain *domain, bool power_on)
hdr->size = 2;
msg.resource = pd->rsrc;
- msg.mode = power_on ? IMX_SC_PM_PW_MODE_ON : IMX_SC_PM_PW_MODE_LP;
+ msg.mode = power_on ? IMX_SC_PM_PW_MODE_ON : pd->pd.state_idx ?
+ IMX_SC_PM_PW_MODE_OFF : IMX_SC_PM_PW_MODE_LP;
/* keep uart console power on for no_console_suspend */
if (imx_con_rsrc == pd->rsrc && !console_suspend_enabled && !power_on)
@@ -412,11 +419,33 @@ static struct generic_pm_domain *imx_scu_pd_xlate(struct of_phandle_args *spec,
return domain;
}
+static bool imx_sc_pd_suspend_ok(struct device *dev)
+{
+ /* Always true */
+ return true;
+}
+
+static bool imx_sc_pd_power_down_ok(struct dev_pm_domain *pd)
+{
+ struct generic_pm_domain *genpd = pd_to_genpd(pd);
+
+ /* For runtime suspend, choose LP mode */
+ genpd->state_idx = 0;
+
+ return true;
+}
+
+struct dev_power_governor imx_sc_pd_qos_governor = {
+ .suspend_ok = imx_sc_pd_suspend_ok,
+ .power_down_ok = imx_sc_pd_power_down_ok,
+};
+
static struct imx_sc_pm_domain *
imx_scu_add_pm_domain(struct device *dev, int idx,
const struct imx_sc_pd_range *pd_ranges)
{
struct imx_sc_pm_domain *sc_pd;
+ struct genpd_power_state *states;
bool is_off;
int mode, ret;
@@ -427,9 +456,22 @@ imx_scu_add_pm_domain(struct device *dev, int idx,
if (!sc_pd)
return ERR_PTR(-ENOMEM);
+ states = devm_kcalloc(dev, PD_STATE_MAX, sizeof(*states), GFP_KERNEL);
+ if (!states) {
+ devm_kfree(dev, sc_pd);
+ return ERR_PTR(-ENOMEM);
+ }
+
sc_pd->rsrc = pd_ranges->rsrc + idx;
sc_pd->pd.power_off = imx_sc_pd_power_off;
sc_pd->pd.power_on = imx_sc_pd_power_on;
+ states[PD_STATE_LP].power_off_latency_ns = 25000;
+ states[PD_STATE_LP].power_on_latency_ns = 25000;
+ states[PD_STATE_OFF].power_off_latency_ns = 2500000;
+ states[PD_STATE_OFF].power_on_latency_ns = 2500000;
+
+ sc_pd->pd.states = states;
+ sc_pd->pd.state_count = PD_STATE_MAX;
if (pd_ranges->postfix)
snprintf(sc_pd->name, sizeof(sc_pd->name),
@@ -455,14 +497,16 @@ imx_scu_add_pm_domain(struct device *dev, int idx,
sc_pd->name, sc_pd->rsrc);
devm_kfree(dev, sc_pd);
+ devm_kfree(dev, states);
return NULL;
}
- ret = pm_genpd_init(&sc_pd->pd, NULL, is_off);
+ ret = pm_genpd_init(&sc_pd->pd, &imx_sc_pd_qos_governor, is_off);
if (ret) {
dev_warn(dev, "failed to init pd %s rsrc id %d",
sc_pd->name, sc_pd->rsrc);
devm_kfree(dev, sc_pd);
+ devm_kfree(dev, states);
return NULL;
}
--
2.37.1
More information about the linux-arm-kernel
mailing list