[PATCH] ARM: dts: nxp: mxs: split interrupts per cells

[Krzysztof Kozlowski]

Each interrupt should be in its own cell.  This is much more readable.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/nxp/mxs/imx23.dtsi | 21 +++++++++++----------
 arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 24 ++++++++++++------------
 2 files changed, 23 insertions(+), 22 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
index a3668a0827fc..5eca942a52fd 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx23.dtsi
@@ -62,8 +62,8 @@ icoll: interrupt-controller at 80000000 {
 			dma_apbh: dma-controller at 80004000 {
 				compatible = "fsl,imx23-dma-apbh";
 				reg = <0x80004000 0x2000>;
-				interrupts = <0 14 20 0
-					      13 13 13 13>;
+				interrupts = <0>, <14>, <20>, <0>,
+					     <13>, <13>, <13>, <13>;
 				#dma-cells = <1>;
 				dma-channels = <8>;
 				clocks = <&clks 15>;
@@ -415,10 +415,10 @@ emi at 80020000 {
 			dma_apbx: dma-apbx at 80024000 {
 				compatible = "fsl,imx23-dma-apbx";
 				reg = <0x80024000 0x2000>;
-				interrupts = <7 5 9 26
-					      19 0 25 23
-					      60 58 9 0
-					      0 0 0 0>;
+				interrupts = <7>, <5>, <9>, <26>,
+					     <19>, <0>, <25>, <23>,
+					     <60>, <58>, <9>, <0>,
+					     <0>, <0>, <0>, <0>;
 				interrupt-names = "audio-adc", "audio-dac", "spdif-tx", "i2c",
 						  "saif0", "empty", "auart0-rx", "auart0-tx",
 						  "auart1-rx", "auart1-tx", "saif1", "empty",
@@ -431,7 +431,7 @@ dma_apbx: dma-apbx at 80024000 {
 			dcp: crypto at 80028000 {
 				compatible = "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
-				interrupts = <53 54>;
+				interrupts = <53>, <54>;
 				status = "okay";
 			};
 
@@ -456,7 +456,7 @@ axi-ahb at 8002e000 {
 			lcdif at 80030000 {
 				compatible = "fsl,imx23-lcdif";
 				reg = <0x80030000 2000>;
-				interrupts = <46 45>;
+				interrupts = <46>, <45>;
 				clocks = <&clks 38>;
 				status = "disabled";
 			};
@@ -525,7 +525,8 @@ audio-in at 8004c000 {
 			lradc: lradc at 80050000 {
 				compatible = "fsl,imx23-lradc";
 				reg = <0x80050000 0x2000>;
-				interrupts = <36 37 38 39 40 41 42 43 44>;
+				interrupts = <36>, <37>, <38>, <39>, <40>,
+					     <41>, <42>, <43>, <44>;
 				status = "disabled";
 				clocks = <&clks 26>;
 				#io-channel-cells = <1>;
@@ -568,7 +569,7 @@ pwm: pwm at 80064000 {
 			timrot at 80068000 {
 				compatible = "fsl,imx23-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				interrupts = <28 29 30 31>;
+				interrupts = <28>, <29>, <30>, <31>;
 				clocks = <&clks 28>;
 			};
 
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 29e37b1fae66..763adeb995ee 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -81,10 +81,10 @@ hsadc: hsadc at 80002000 {
 			dma_apbh: dma-controller at 80004000 {
 				compatible = "fsl,imx28-dma-apbh";
 				reg = <0x80004000 0x2000>;
-				interrupts = <82 83 84 85
-					      88 88 88 88
-					      88 88 88 88
-					      87 86 0 0>;
+				interrupts = <82>, <83>, <84>, <85>,
+					     <88>, <88>, <88>, <88>,
+					     <88>, <88>, <88>, <88>,
+					     <87>, <86>, <0>, <0>;
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 25>;
@@ -993,10 +993,10 @@ etm: etm at 80022000 {
 			dma_apbx: dma-apbx at 80024000 {
 				compatible = "fsl,imx28-dma-apbx";
 				reg = <0x80024000 0x2000>;
-				interrupts = <78 79 66 0
-					      80 81 68 69
-					      70 71 72 73
-					      74 75 76 77>;
+				interrupts = <78>, <79>, <66>, <0>,
+					     <80>, <81>, <68>, <69>,
+					     <70>, <71>, <72>, <73>,
+					     <74>, <75>, <76>, <77>;
 				#dma-cells = <1>;
 				dma-channels = <16>;
 				clocks = <&clks 26>;
@@ -1005,7 +1005,7 @@ dma_apbx: dma-apbx at 80024000 {
 			dcp: crypto at 80028000 {
 				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 				reg = <0x80028000 0x2000>;
-				interrupts = <52 53 54>;
+				interrupts = <52>, <53>, <54>;
 				status = "okay";
 			};
 
@@ -1136,8 +1136,8 @@ saif1: saif at 80046000 {
 			lradc: lradc at 80050000 {
 				compatible = "fsl,imx28-lradc";
 				reg = <0x80050000 0x2000>;
-				interrupts = <10 14 15 16 17 18 19
-						20 21 22 23 24 25>;
+				interrupts = <10>, <14>, <15>, <16>, <17>, <18>, <19>,
+					     <20>, <21>, <22>, <23>, <24>, <25>;
 				status = "disabled";
 				clocks = <&clks 41>;
 				#io-channel-cells = <1>;
@@ -1193,7 +1193,7 @@ pwm: pwm at 80064000 {
 			timer: timrot at 80068000 {
 				compatible = "fsl,imx28-timrot", "fsl,timrot";
 				reg = <0x80068000 0x2000>;
-				interrupts = <48 49 50 51>;
+				interrupts = <48>, <49>, <50>, <51>;
 				clocks = <&clks 26>;
 			};
 
-- 
2.34.1