[PATCH net-next] net: ethernet: mtk_eth_soc: support per-flow accounting on MT7988
Daniel Golle
daniel at makrotopia.org
Sat Jul 29 06:55:15 PDT 2023
NETSYS_V3 uses 64 bits for each counters while older SoCs were using
48 bits for each counter.
Support reading per-flow byte and package counters on NETSYS_V3.
Signed-off-by: Daniel Golle <daniel at makrotopia.org>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 +
drivers/net/ethernet/mediatek/mtk_ppe.c | 18 ++++++++++++++----
drivers/net/ethernet/mediatek/mtk_ppe_regs.h | 2 ++
3 files changed, 17 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 05be702f19c5e..1b89f800f6dff 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -5064,6 +5064,7 @@ static const struct mtk_soc_data mt7988_data = {
.version = 3,
.offload_version = 2,
.hash_offset = 4,
+ .has_accounting = true,
.foe_entry_size = MTK_FOE_ENTRY_V3_SIZE,
.txrx = {
.txd_size = sizeof(struct mtk_tx_dma_v2),
diff --git a/drivers/net/ethernet/mediatek/mtk_ppe.c b/drivers/net/ethernet/mediatek/mtk_ppe.c
index bf1ecb0c1c109..1ec508bb206bf 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe.c
+++ b/drivers/net/ethernet/mediatek/mtk_ppe.c
@@ -107,10 +107,20 @@ static int mtk_mib_entry_read(struct mtk_ppe *ppe, u16 index, u64 *bytes, u64 *p
cnt_r1 = readl(ppe->base + MTK_PPE_MIB_SER_R1);
cnt_r2 = readl(ppe->base + MTK_PPE_MIB_SER_R2);
- byte_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW, cnt_r0);
- byte_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH, cnt_r1);
- pkt_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R1_PKT_CNT_LOW, cnt_r1);
- pkt_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH, cnt_r2);
+ if (mtk_is_netsys_v3_or_greater(ppe->eth)) {
+ /* 64 bit for each counter */
+ bytes_cnt_low = cnt_r0;
+ bytes_cnt_high = cnt_r1;
+ pkt_cnt_low = cnt_r2;
+ pkt_cnt_high = readl(ppe->base + MTK_PPE_MIB_SER_R3);
+ } else {
+ /* 48 bit for each counter */
+ byte_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R0_BYTE_CNT_LOW, cnt_r0);
+ byte_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R1_BYTE_CNT_HIGH, cnt_r1);
+ pkt_cnt_low = FIELD_GET(MTK_PPE_MIB_SER_R1_PKT_CNT_LOW, cnt_r1);
+ pkt_cnt_high = FIELD_GET(MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH, cnt_r2);
+ }
+
*bytes = ((u64)byte_cnt_high << 32) | byte_cnt_low;
*packets = (pkt_cnt_high << 16) | pkt_cnt_low;
diff --git a/drivers/net/ethernet/mediatek/mtk_ppe_regs.h b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
index a2e61b3eb006d..3ce088eef0efd 100644
--- a/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
+++ b/drivers/net/ethernet/mediatek/mtk_ppe_regs.h
@@ -163,6 +163,8 @@ enum {
#define MTK_PPE_MIB_SER_R2 0x348
#define MTK_PPE_MIB_SER_R2_PKT_CNT_HIGH GENMASK(23, 0)
+#define MTK_PPE_MIB_SER_R3 0x34c
+
#define MTK_PPE_MIB_CACHE_CTL 0x350
#define MTK_PPE_MIB_CACHE_CTL_EN BIT(0)
#define MTK_PPE_MIB_CACHE_CTL_FLUSH BIT(2)
--
2.41.0
More information about the linux-arm-kernel
mailing list