[PATCH v3 0/8] arm64: ti: k3-am62: Add display support

Aradhya Bhatia a-bhatia1 at ti.com
Fri Jul 28 10:34:30 PDT 2023


Hi all,

Reviving this old patch series, after a long time. This was paused
because the compatible for the Display SubSystem (DSS) had to be
changed, along with the driver.

The patch series adds DT nodes for Display SubSystem (DSS) and other
peripherals required to enable the HDMI audio and video on the AM625 SK,
AM62-LP SK, as well as the AM625 based Beagle-Play platforms. An HDMI
monitor can be connected to the boards for the audio/video outputs.

The series adding the compatible and basic driver support[0] is in the
drm-misc-next and linux-next queues and is expected to be in the
mainline by v6.6-rc1.

Patches 5 and 7 have been picked up from TI's linux tree[1] based off
linux-kernel v6.1.

Change Log:
V2 -> V3:
  - Updated the compatible from "ti,am65x-dss" to "ti,am625-dss".
  - Peripheral nodes like HDMI TX, HDMI connector are now added to
    k3-am62x-sk-common.dtsi instead of k3-am625-sk.dts, in order to
    support AM62-LP SK-EVM as well.
  - Dropped the HDMI master clock node as it is not connected on the
    EVM, and should not have been added in the first place.
  - Re-worded and Re-ordered commits.
  - Dropped Rahul Ravikumar's R-bs because of the changes.
  - Added AM625 based Beagle-Play for HDMI support.
  - Added HDMI audio support as well.

V1 -> V2:
 - Removed repetitive data in dss_ports

V2: https://lore.kernel.org/all/20220505134303.23208-1-a-bhatia1@ti.com/
V1: https://lore.kernel.org/all/20220427090850.32280-1-a-bhatia1@ti.com/

[0]: https://lore.kernel.org/all/20230616150900.6617-1-a-bhatia1@ti.com/
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/log/?h=ti-linux-6.1.y-cicd

Aradhya Bhatia (6):
  arm64: dts: ti: k3-am62x-sk-common: Update main-i2c1 frequency
  arm64: dts: ti: k3-am62-main: Add node for Display SubSystem
  arm64: dts: ti: k3-am62x-sk-common: Add DSS pinmux info
  arm64: dts: ti: k3-am62x-sk-common: Add support for HDMI output
  arm64: dts: ti: k3-am625-beagleplay: Add DSS pinmux info
  arm64: defconfig: Enable ITE_IT66121 HDMI transmitter

Jai Luthra (1):
  arm64: dts: ti: am62x-sk: Add overlay for HDMI audio

Nishanth Menon (1):
  arm64: dts: ti: k3-am625-beagleplay: Add HDMI support

 arch/arm64/boot/dts/ti/Makefile               |   3 +
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi      |  23 +++
 .../arm64/boot/dts/ti/k3-am625-beagleplay.dts | 182 ++++++++++++++++++
 .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 119 +++++++++++-
 .../boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso   |  40 ++++
 arch/arm64/configs/defconfig                  |   1 +
 6 files changed, 367 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am62x-sk-hdmi-audio.dtso

-- 
2.40.1




More information about the linux-arm-kernel mailing list