[PATCH v3 27/50] dt-bindings: usb: atmel: add sam9x7

[Varshini Rajendran]

Add sam9x7 bindings.

Signed-off-by: Varshini Rajendran <varshini.rajendran at microchip.com>
---
 Documentation/devicetree/bindings/usb/atmel-usb.txt | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 12183ef47ee4..82bd0dbc2a48 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -3,8 +3,9 @@ Atmel SOC USB controllers
 OHCI
 
 Required properties:
- - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91rm9200-ohci" or
+   "microchip,sam9x7-ohci", "atmel,at91rm9200-ohci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ohci interrupt
  - clocks: Should reference the peripheral, host and system clocks
@@ -30,8 +31,9 @@ usb0: ohci at 500000 {
 EHCI
 
 Required properties:
- - compatible: Should be "atmel,at91sam9g45-ehci" for USB controllers
-   used in host mode.
+ - compatible: Should be "atmel,at91sam9g45-ehci" or
+   "microchip,sam9x7-ehci", "atmel,at91sam9g45-ehci"
+   for USB controllers used in host mode.
  - reg: Address and length of the register set for the device
  - interrupts: Should contain ehci interrupt
  - clocks: Should reference the peripheral and the UTMI clocks
@@ -87,6 +89,7 @@ Required properties:
 	       "atmel,at91sam9g45-udc"
 	       "atmel,sama5d3-udc"
 	       "microchip,sam9x60-udc"
+	       "microchip,sam9x7-udc", "microchip,sam9x60-udc"
 	       "microchip,lan9662-udc"
 	       For "microchip,lan9662-udc" the fallback "atmel,sama5d3-udc"
 	       is required.
-- 
2.25.1