[PATCH 12/14] ARM: dts: sti: addition of display nodes for stih418 platform

[Krzysztof Kozlowski]

On 27/07/2023 23:51, Alain Volmat wrote:
> Addition of a first set of nodes (compositor/tvout/hdmi/dvo) in order
> to allow graphic plane usage via HDMI or DVO on the stih418 based boards.
> 
> Signed-off-by: Alain Volmat <avolmat at me.com>
> ---
>  arch/arm/boot/dts/st/stih418-clock.dtsi |   2 +-
>  arch/arm/boot/dts/st/stih418.dtsi       | 154 ++++++++++++++++++++++++
>  2 files changed, 155 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/st/stih418-clock.dtsi b/arch/arm/boot/dts/st/stih418-clock.dtsi
> index e1749e92a2e7..93641df58bf2 100644
> --- a/arch/arm/boot/dts/st/stih418-clock.dtsi
> +++ b/arch/arm/boot/dts/st/stih418-clock.dtsi
> @@ -17,7 +17,7 @@ clk_sysin: clk-sysin {
>  	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
>  		#clock-cells = <0>;
>  		compatible = "fixed-clock";
> -		clock-frequency = <0>;
> +		clock-frequency = <594000000>;
>  	};
>  
>  	clocks {
> diff --git a/arch/arm/boot/dts/st/stih418.dtsi b/arch/arm/boot/dts/st/stih418.dtsi
> index b35b9b7a7ccc..b41de235fffa 100644
> --- a/arch/arm/boot/dts/st/stih418.dtsi
> +++ b/arch/arm/boot/dts/st/stih418.dtsi
> @@ -6,6 +6,7 @@
>  #include "stih418-clock.dtsi"
>  #include "stih407-family.dtsi"
>  #include "stih410-pinctrl.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>  / {
>  	cpus {
>  		#address-cells = <1>;
> @@ -114,5 +115,158 @@ thermal at 91a0000 {
>  			clocks = <&clk_sysin>;
>  			interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>;
>  		};
> +
> +		sti-display-subsystem at 0 {

display-subsystem@
or display-controller@

Although 0 is a bit weird address... are you sure this is correct?

> +			compatible = "st,sti-display-subsystem";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			reg = <0 0>;
> +			assigned-clocks = <&clk_s_d2_quadfs 0>,
> +					  <&clk_s_d2_quadfs 1>,
> +					  <&clk_s_d2_flexgen CLK_TMDS_HDMI_DIV2>,
> +					  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
> +					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
> +					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
> +					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
> +					  <&clk_s_c0_flexgen CLK_AUX_DISP>,
> +					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> +					  <&clk_s_c0_flexgen CLK_PROC_MIXER>;
> +
> +			assigned-clock-parents = <0>,
> +						 <0>,
> +						 <&clk_tmdsout_hdmi>,
> +						 <&clk_tmdsout_hdmi>,
> +						 <&clk_s_d2_quadfs 0>,
> +						 <&clk_s_d2_quadfs 1>,
> +						 <&clk_s_c0_pll1 0>,
> +						 <&clk_s_c0_pll1 0>,
> +						 <&clk_s_c0_pll0 0>,
> +						 <&clk_s_c0_pll0 0>;
> +
> +			assigned-clock-rates = <297000000>,
> +					       <108000000>,
> +					       <297000000>,
> +					       <0>,
> +					       <74250000>,
> +					       <13500000>,
> +					       <400000000>,
> +					       <400000000>,
> +					       <355000000>,
> +					       <355000000>;
> +
> +			ranges;
> +
> +			sti_compo: sti-compositor at a600000 {

compositor@

> +				compatible = "st,stih418-compositor";
> +				reg = <0xa600000 0x200000>;
> +
> +				clock-names = "compo_main",
> +					      "compo_aux",
> +					      "pix_main",
> +					      "pix_aux",
> +					      "proc_mixer";
> +
> +				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> +					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
> +					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
> +					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
> +					 <&clk_s_c0_flexgen CLK_PROC_MIXER>;
> +
> +				reset-names = "compo-main", "compo-aux";
> +				resets = <&softreset STIH407_COMPO_SOFTRESET>,
> +					 <&softreset STIH407_COMPO_SOFTRESET>;
> +				st,vtg = <&vtg_main>, <&vtg_aux>;
> +
> +				status = "disabled";
> +			};
> +
> +			sti_tvout: sti-tvout at a900000 {

hdmi@
or something else

> +				compatible = "st,stih418-tvout";
> +				reg = <0xa900000 0x1000>;
> +				reg-names = "tvout-reg";
> +				reset-names = "tvout";
> +				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
> +				#address-cells = <1>;
> +				#size-cells = <1>;
> +				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
> +						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
> +						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
> +						  <&clk_s_d0_flexgen CLK_PCM_0>,
> +						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
> +						  <&clk_s_d2_flexgen CLK_HDDAC>;
> +
> +				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
> +							 <&clk_tmdsout_hdmi>,
> +							 <&clk_s_d2_quadfs 0>,
> +							 <&clk_s_d0_quadfs 0>,
> +							 <&clk_s_d2_quadfs 0>,
> +							 <&clk_s_d2_quadfs 0>;
> +				assigned-clock-rates = <74250000>,
> +						       <0>,
> +						       <74250000>,
> +						       <0>,
> +						       <74250000>,
> +						       <148500000>;
> +
> +				status = "disabled";
> +			};
> +
> +			sti_dvo: sti-dvo at a800400 {

I don't know, but definitely sti is not a generic name.

> +				compatible = "st,stih407-dvo";
> +				reg = <0xa800400 0x200>;
> +				reg-names = "dvo-reg";
> +				clock-names = "dvo_pix", "dvo",
> +					      "main_parent", "aux_parent";
> +				clocks = <&clk_s_d2_flexgen CLK_PIX_DVO>,
> +					 <&clk_s_d2_flexgen CLK_DVO>,
> +					 <&clk_s_d2_quadfs 0>, <&clk_s_d2_quadfs 1>;
> +				status = "disabled";
> +			};
> +
> +			sti_hdmi: sti-hdmi at a804000 {

hdmi@

> +				compatible = "st,stih418-hdmi";
> +				reg = <0xa804000 0x1000>;
> +				reg-names = "hdmi-reg";
> +				#sound-dai-cells = <0>;
> +				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
> +				interrupt-names = "irq";
> +				clock-names = "pix",
> +					      "tmds",
> +					      "phy",
> +					      "audio",
> +					      "main_parent",
> +					      "aux_parent";
> +
> +				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
> +					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
> +					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
> +					 <&clk_s_d0_flexgen CLK_PCM_0>,
> +					 <&clk_s_d2_quadfs 0>,
> +					 <&clk_s_d2_quadfs 1>;
> +
> +				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
> +				reset-names = "hdmi";
> +				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
> +
> +				status = "disabled";
> +			};
> +		};
Best regards,
Krzysztof