[PATCH v2] arm64: defconfig: Enable various configs for TI platforms
Udit Kumar
u-kumar1 at ti.com
Wed Jul 26 06:30:49 PDT 2023
Enable TI ECAP, DP83869 driver, TI OMAP2, K3 remote proc
SND_SOC_J721E_EVM, MCAN, UFS and RTI driver to be built
as module.
These are needed on different TI platforms.
Signed-off-by: Aradhya Bhatia <a-bhatia1 at ti.com>
Signed-off-by: Hari Nagalla <hnagalla at ti.com>
Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary at ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
Signed-off-by: Judith Mendez <jm at ti.com>
Signed-off-by: Udit Kumar <u-kumar1 at ti.com>
---
bloat-o-meter reports after this change
add/remove: 4/0 grow/shrink: 2/0 up/down: 1592/0 (1592)
[...]
Total: Before=27997071, After=27998663, chg +0.01%
Change log:
Changes in v2:
Squashed all patches into one
link to v1:.
https://lore.kernel.org/all/20230725105346.1981285-1-u-kumar1@ti.com/
arch/arm64/configs/defconfig | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 6cbf6eb59378..dedf1bd9c29f 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -180,6 +180,8 @@ CONFIG_NET_ACT_GATE=m
CONFIG_QRTR_SMD=m
CONFIG_QRTR_TUN=m
CONFIG_CAN=m
+CONFIG_CAN_M_CAN=m
+CONFIG_CAN_M_CAN_PLATFORM=m
CONFIG_BT=m
CONFIG_BT_HIDP=m
# CONFIG_BT_LE is not set
@@ -375,6 +377,7 @@ CONFIG_AT803X_PHY=y
CONFIG_REALTEK_PHY=y
CONFIG_ROCKCHIP_PHY=y
CONFIG_DP83867_PHY=y
+CONFIG_DP83869_PHY=m
CONFIG_DP83TD510_PHY=y
CONFIG_VITESSE_PHY=y
CONFIG_CAN_FLEXCAN=m
@@ -687,6 +690,7 @@ CONFIG_UNIPHIER_WATCHDOG=y
CONFIG_PM8916_WATCHDOG=m
CONFIG_BCM2835_WDT=y
CONFIG_BCM7038_WDT=m
+CONFIG_K3_RTI_WATCHDOG=m
CONFIG_MFD_ALTERA_SYSMGR=y
CONFIG_MFD_BD9571MWV=y
CONFIG_MFD_AXP20X_I2C=y
@@ -927,6 +931,7 @@ CONFIG_SND_SOC_MSM8916_WCD_ANALOG=m
CONFIG_SND_SOC_MSM8916_WCD_DIGITAL=m
CONFIG_SND_SOC_PCM3168A_I2C=m
CONFIG_SND_SOC_RT5640=m
+CONFIG_SND_SOC_J721E_EVM=m
CONFIG_SND_SOC_RT5659=m
CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m
CONFIG_SND_SOC_SIMPLE_MUX=m
@@ -1048,10 +1053,13 @@ CONFIG_MMC_SDHCI_XENON=y
CONFIG_MMC_SDHCI_AM654=y
CONFIG_MMC_OWL=y
CONFIG_SCSI_UFSHCD=y
+CONFIG_SCSI_UFS_BSG=y
CONFIG_SCSI_UFSHCD_PLATFORM=y
+CONFIG_SCSI_UFS_CDNS_PLATFORM=m
CONFIG_SCSI_UFS_QCOM=m
CONFIG_SCSI_UFS_HISI=y
CONFIG_SCSI_UFS_RENESAS=m
+CONFIG_SCSI_UFS_TI_J721E=m
CONFIG_SCSI_UFS_EXYNOS=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1230,6 +1238,7 @@ CONFIG_TEGRA186_TIMER=y
CONFIG_RENESAS_OSTM=y
CONFIG_ARM_MHU=y
CONFIG_IMX_MBOX=y
+CONFIG_OMAP2PLUS_MBOX=m
CONFIG_PLATFORM_MHU=y
CONFIG_BCM2835_MBOX=y
CONFIG_QCOM_APCS_IPC=y
@@ -1242,6 +1251,8 @@ CONFIG_MTK_IOMMU=y
CONFIG_QCOM_IOMMU=y
CONFIG_REMOTEPROC=y
CONFIG_IMX_REMOTEPROC=y
+CONFIG_TI_K3_R5_REMOTEPROC=m
+CONFIG_TI_K3_DSP_REMOTEPROC=m
CONFIG_MTK_SCP=m
CONFIG_QCOM_Q6V5_ADSP=m
CONFIG_QCOM_Q6V5_MSS=m
@@ -1356,6 +1367,7 @@ CONFIG_PWM_SAMSUNG=y
CONFIG_PWM_SL28CPLD=m
CONFIG_PWM_SUN4I=m
CONFIG_PWM_TEGRA=m
+CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_VISCONTI=m
CONFIG_SL28CPLD_INTC=y
@@ -1441,6 +1453,7 @@ CONFIG_FPGA_REGION=m
CONFIG_OF_FPGA_REGION=m
CONFIG_TEE=y
CONFIG_OPTEE=y
+CONFIG_MUX_GPIO=m
CONFIG_MUX_MMIO=y
CONFIG_SLIMBUS=m
CONFIG_SLIM_QCOM_CTRL=m
--
2.34.1
More information about the linux-arm-kernel
mailing list