[PATCH 2/4] ARM: dts: st: stm32mp157c-emstamp: correct regulator-active-discharge

[Krzysztof Kozlowski]

The "regulator-active-discharge" property is uint32, not boolean:

  stm32mp157c-emsbc-argon.dtb: stpmic at 33: regulators:pwr_sw1:regulator-active-discharge: True is not of type 'array'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
index f8e9980ed3d4..009209ca673b 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp157c-emstamp-argon.dtsi
@@ -320,7 +320,7 @@ bst_out: boost {
 			vbus_otg: pwr_sw1 {
 				regulator-name = "vbus_otg";
 				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
+				regulator-active-discharge = <1>;
 			};
 
 			vbus_usbh: pwr_sw2 {
-- 
2.34.1