[PATCH v3 0/2] Add MAIN CPSW2G DT support for J721S2

[Siddharth Vadapalli]

Hello,

This series adds devicetree node for MAIN CPSW2G instance of CPSW
Ethernet Switch on TI's J721S2 SoC. Also, a devicetree overlay is added
in order to enable MAIN CPSW2G in RGMII-RXID mode using the GESI
Expansion Board connected to the J7 Common-Processor-Board.

Regards,
Siddharth.

---
NOTE: This series is based on linux-next tagged next-20230725.

v2:
https://lore.kernel.org/r/20230710094328.1359377-1-s-vadapalli@ti.com/
Changes since v2:
- Collect Reviewed-by tag from Ravi Gunasekaran <r-gunasekaran at ti.com>.
- Rename main_cpsw_mdio_pins_default and rgmii1_pins_default to:
  main_cpsw_mdio_default_pins and rgmii1_default_pins respectively.
- Rename main-cpsw-mdio-pins-default and rgmii1-pins-default to:
  main-cpsw-mdio-default-pins and rgmii1-default-pins respectively.
- The above changes are performed to follow the updated json-schema
  patch at:
  https://lore.kernel.org/all/169021456020.3622493.10284534202541859578.robh@kernel.org/
- Rebase series on next-20230725.

v1:
https://lore.kernel.org/r/20230529104913.560045-1-s-vadapalli@ti.com/
Changes since v1:
- Rebase series on next-20230710.

RFC:
https://lore.kernel.org/r/20230426105718.118806-1-s-vadapalli@ti.com/
Changes since RFC:
- Add GESI board product link in the device-tree overlay file.

Kishon Vijay Abraham I (2):
  arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node
  arm64: dts: ti: k3-j721s2: Add overlay to enable main CPSW2G with GESI

 arch/arm64/boot/dts/ti/Makefile               |  2 +
 .../dts/ti/k3-j721s2-evm-gesi-exp-board.dtso  | 85 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi    | 69 +++++++++++++++
 3 files changed, 156 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-gesi-exp-board.dtso

-- 
2.34.1