[PATCH v3 1/2] arm64: dts: ti: k3-j721s2-main: Add main CPSW2G devicetree node
Siddharth Vadapalli
s-vadapalli at ti.com
Tue Jul 25 23:54:06 PDT 2023
From: Kishon Vijay Abraham I <kishon at ti.com>
TI's J721S2 SoC has a MAIN CPSW2G instance of the CPSW Ethernet Switch.
Add devicetree node for it.
Signed-off-by: Kishon Vijay Abraham I <kishon at ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
Reviewed-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
---
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index ed79ab3a3271..4d0d27e7ca1b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -51,6 +51,12 @@ usb_serdes_mux: mux-controller at 0 {
mux-reg-masks = <0x0 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */
};
+ phy_gmii_sel_cpsw: phy at 34 {
+ compatible = "ti,am654-phy-gmii-sel";
+ reg = <0x34 0x4>;
+ #phy-cells = <1>;
+ };
+
serdes_ln_ctrl: mux-controller at 80 {
compatible = "mmio-mux";
reg = <0x80 0x10>;
@@ -1039,6 +1045,69 @@ cpts at 310d0000 {
};
};
+ main_cpsw: ethernet at c200000 {
+ compatible = "ti,j721e-cpsw-nuss";
+ reg = <0x00 0xc200000 0x00 0x200000>;
+ reg-names = "cpsw_nuss";
+ ranges = <0x0 0x0 0x0 0xc200000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ dma-coherent;
+ clocks = <&k3_clks 28 28>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+
+ dmas = <&main_udmap 0xc640>,
+ <&main_udmap 0xc641>,
+ <&main_udmap 0xc642>,
+ <&main_udmap 0xc643>,
+ <&main_udmap 0xc644>,
+ <&main_udmap 0xc645>,
+ <&main_udmap 0xc646>,
+ <&main_udmap 0xc647>,
+ <&main_udmap 0x4640>;
+ dma-names = "tx0", "tx1", "tx2", "tx3",
+ "tx4", "tx5", "tx6", "tx7",
+ "rx";
+
+ status = "disabled";
+
+ ethernet-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ main_cpsw_port1: port at 1 {
+ reg = <1>;
+ ti,mac-only;
+ label = "port1";
+ phys = <&phy_gmii_sel_cpsw 1>;
+ status = "disabled";
+ };
+ };
+
+ main_cpsw_mdio: mdio at f00 {
+ compatible = "ti,cpsw-mdio","ti,davinci_mdio";
+ reg = <0x00 0xf00 0x00 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&k3_clks 28 28>;
+ clock-names = "fck";
+ bus_freq = <1000000>;
+ status = "disabled";
+ };
+
+ cpts at 3d000 {
+ compatible = "ti,am65-cpts";
+ reg = <0x00 0x3d000 0x00 0x400>;
+ clocks = <&k3_clks 28 3>;
+ clock-names = "cpts";
+ interrupts-extended = <&gic500 GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "cpts";
+ ti,cpts-ext-ts-inputs = <4>;
+ ti,cpts-periodic-outputs = <2>;
+ };
+ };
+
usbss0: cdns-usb at 4104000 {
compatible = "ti,j721e-usb";
reg = <0x00 0x04104000 0x00 0x100>;
--
2.34.1
More information about the linux-arm-kernel
mailing list