[PATCH] arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
Fabio Estevam
festevam at gmail.com
Tue Jul 25 16:26:28 PDT 2023
From: Fabio Estevam <festevam at denx.de>
The CSI1 PHY reference clock is limited to 125 MHz according to:
i.MX 8M Mini Applications Processor Reference Manual, Rev. 3, 11/2020
Table 5-1. Clock Root Table (continued) / page 307
Slice Index n = 123 .
Currently the IMX8MM_CLK_CSI1_PHY_REF clock is configured to be
fed directly from 1 GHz PLL2 , which overclocks them. Instead, drop
the configuration altogether, which defaults the clock to 24 MHz REF
clock input, which for the PHY reference clock is just fine.
Based on a patch from Marek Vasut for the imx8mn.
Fixes: e523b7c54c05 ("arm64: dts: imx8mm: Add CSI nodes")
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index a831fd8e3706..236fe44f779d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1221,10 +1221,9 @@ mipi_csi: mipi-csi at 32e30000 {
compatible = "fsl,imx8mm-mipi-csi2";
reg = <0x32e30000 0x1000>;
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
- assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>,
- <&clk IMX8MM_CLK_CSI1_PHY_REF>;
- assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>,
- <&clk IMX8MM_SYS_PLL2_1000M>;
+ assigned-clocks = <&clk IMX8MM_CLK_CSI1_CORE>;
+ assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_1000M>;
+
clock-frequency = <333000000>;
clocks = <&clk IMX8MM_CLK_DISP_APB_ROOT>,
<&clk IMX8MM_CLK_CSI1_ROOT>,
--
2.34.1
More information about the linux-arm-kernel
mailing list