[PATCH v4 6/6] arm64: dts: qcom: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties
Alexander Stein
alexander.stein at ew.tq-group.com
Mon Jul 24 22:53:24 PDT 2023
Am Montag, 24. Juli 2023, 20:04:00 CEST schrieb Heiko Stuebner:
> Am Montag, 24. Juli 2023, 12:39:13 CEST schrieb Alexander Stein:
> > Use id-gpios and vbus-gpios instead.
> >
> > Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> > Reviewed-by: AngeloGioacchino Del Regno
> > <angelogioacchino.delregno at collabora.com> Acked-by: Shawn Guo
> > <shawnguo at kernel.org>
> > Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
> > ---
> >
> > arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 2 +-
>
> sorry to be a spoilsport, but Rockchip is not part of qcom ;-) .
Oh, I'm pretty sure I splitted them properly, so I probably accidentally
squashed them again somehow :(
> I don't have a massive problem with this going through the qcom tree
> though, so if you don't respin,
>
> Acked-by: Heiko Stuebner <heiko at sntech.de> #rockchip
Okay, thanks
Best regards,
Alexander
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> > b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index
> > aa3e21bd6c8f..20e3f41efe97 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi
> > @@ -27,7 +27,7 @@ module_led: led-0 {
> >
> > extcon_usb3: extcon-usb3 {
> >
> > compatible = "linux,extcon-usb-gpio";
> >
> > - id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> > + id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
> >
> > pinctrl-names = "default";
> > pinctrl-0 = <&usb3_id>;
> >
> > };
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/
More information about the linux-arm-kernel
mailing list