[PATCH v4 29/32] sound: soc: qcom: q6usb: Add headphone jack for offload connection status
Wesley Cheng
quic_wcheng at quicinc.com
Mon Jul 24 19:34:13 PDT 2023
The headphone jack framework has a well defined intrastructure for
notifying userspace entities through input devices. Expose a jack device
that carries information about if an offload capable device is connected.
Applications can further identify specific offloading information through
other SND kcontrols.
Signed-off-by: Wesley Cheng <quic_wcheng at quicinc.com>
---
sound/soc/qcom/qdsp6/q6usb.c | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6usb.c b/sound/soc/qcom/qdsp6/q6usb.c
index e4ccb9d912b0..860dff8c1438 100644
--- a/sound/soc/qcom/qdsp6/q6usb.c
+++ b/sound/soc/qcom/qdsp6/q6usb.c
@@ -20,6 +20,7 @@
#include <sound/pcm_params.h>
#include <sound/asound.h>
#include <sound/q6usboffload.h>
+#include <sound/jack.h>
#include "q6dsp-lpass-ports.h"
#include "q6afe.h"
@@ -37,6 +38,7 @@ struct q6usb_status {
struct q6usb_port_data {
struct q6afe_usb_cfg usb_cfg;
struct snd_soc_usb *usb;
+ struct snd_soc_jack hs_jack;
struct q6usb_offload priv;
struct mutex mutex;
unsigned long available_card_slot;
@@ -279,6 +281,7 @@ static const struct snd_kcontrol_new q6usb_offload_control = {
/* Build a mixer control for a UAC connector control (jack-detect) */
static void q6usb_connector_control_init(struct snd_soc_component *component)
{
+ struct q6usb_port_data *data = dev_get_drvdata(component->dev);
int ret;
ret = snd_ctl_add(component->card->snd_card,
@@ -290,6 +293,11 @@ static void q6usb_connector_control_init(struct snd_soc_component *component)
snd_ctl_new1(&q6usb_offload_dev_ctrl, component));
if (ret < 0)
return;
+
+ ret = snd_soc_card_jack_new(component->card, "USB offload",
+ SND_JACK_HEADSET, &data->hs_jack);
+ if (ret)
+ return;
}
static int q6usb_audio_ports_of_xlate_dai_name(struct snd_soc_component *component,
@@ -322,7 +330,10 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, int card_idx,
mutex_lock(&data->mutex);
if (connected) {
- snd_soc_dapm_enable_pin(dapm, "USB_RX_BE");
+ if (!data->available_card_slot) {
+ snd_soc_dapm_enable_pin(dapm, "USB_RX_BE");
+ snd_jack_report(data->hs_jack.jack, 1);
+ }
/*
* Update the latest USB headset plugged in, if session is
* idle.
@@ -338,8 +349,10 @@ static int q6usb_alsa_connection_cb(struct snd_soc_usb *usb, int card_idx,
clear_bit(card_idx, &data->available_card_slot);
data->status[card_idx].num_pcm = 0;
data->status[card_idx].chip_index = 0;
- if (!data->available_card_slot)
+ if (!data->available_card_slot) {
snd_soc_dapm_disable_pin(dapm, "USB_RX_BE");
+ snd_jack_report(data->hs_jack.jack, 0);
+ }
}
snd_soc_dapm_sync(dapm);
mutex_unlock(&data->mutex);
More information about the linux-arm-kernel
mailing list