[PATCH v3 2/2] remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
Marek Vasut
marex at denx.de
Mon Jul 24 15:24:18 PDT 2023
The MX8M CM7 boot via SMC call is problematic, since not all versions
of ATF support this interface. Extend the MMIO support so it can boot
the CM7 on MX8MN/MP instead and discern the two alternatives using DT
compatible strings.
Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: Bjorn Andersson <andersson at kernel.org>
Cc: Conor Dooley <conor+dt at kernel.org>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
Cc: NXP Linux Team <linux-imx at nxp.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Shawn Guo <shawnguo at kernel.org>
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-remoteproc at vger.kernel.org
---
V2: Rename 'gpr' to 'fsl,iomuxc-gpr'
V3: No change
---
drivers/remoteproc/imx_rproc.c | 58 ++++++++++++++++++++++++++++++++--
drivers/remoteproc/imx_rproc.h | 2 ++
2 files changed, 58 insertions(+), 2 deletions(-)
diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 4ee2646ce62ad..8bb293b9f327c 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -40,6 +40,12 @@
#define IMX7D_M4_STOP (IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST | \
IMX7D_SW_M4C_NON_SCLR_RST)
+#define IMX8M_M7_STOP (IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST)
+#define IMX8M_M7_POLL IMX7D_ENABLE_M4
+
+#define IMX8M_GPR22 0x58
+#define IMX8M_GPR22_CM7_CPUWAIT BIT(0)
+
/* Address: 0x020D8000 */
#define IMX6SX_SRC_SCR 0x00
#define IMX6SX_ENABLE_M4 BIT(22)
@@ -91,6 +97,7 @@ static int imx_rproc_detach_pd(struct rproc *rproc);
struct imx_rproc {
struct device *dev;
struct regmap *regmap;
+ struct regmap *gpr;
struct rproc *rproc;
const struct imx_rproc_dcfg *dcfg;
struct imx_rproc_mem mem[IMX_RPROC_MEM_MAX];
@@ -285,6 +292,18 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
{ 0x80000000, 0x80000000, 0x60000000, 0 },
};
+static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn_mmio = {
+ .src_reg = IMX7D_SRC_SCR,
+ .src_mask = IMX7D_M4_RST_MASK,
+ .src_start = IMX7D_M4_START,
+ .src_stop = IMX8M_M7_STOP,
+ .gpr_reg = IMX8M_GPR22,
+ .gpr_wait = IMX8M_GPR22_CM7_CPUWAIT,
+ .att = imx_rproc_att_imx8mn,
+ .att_size = ARRAY_SIZE(imx_rproc_att_imx8mn),
+ .method = IMX_RPROC_MMIO,
+};
+
static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
.att = imx_rproc_att_imx8mn,
.att_size = ARRAY_SIZE(imx_rproc_att_imx8mn),
@@ -365,8 +384,14 @@ static int imx_rproc_start(struct rproc *rproc)
switch (dcfg->method) {
case IMX_RPROC_MMIO:
- ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
- dcfg->src_start);
+ if (priv->gpr) {
+ ret = regmap_clear_bits(priv->gpr, dcfg->gpr_reg,
+ dcfg->gpr_wait);
+ } else {
+ ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
+ dcfg->src_mask,
+ dcfg->src_start);
+ }
break;
case IMX_RPROC_SMC:
arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, 0, 0, 0, 0, 0, 0, &res);
@@ -395,6 +420,16 @@ static int imx_rproc_stop(struct rproc *rproc)
switch (dcfg->method) {
case IMX_RPROC_MMIO:
+ if (priv->gpr) {
+ ret = regmap_set_bits(priv->gpr, dcfg->gpr_reg,
+ dcfg->gpr_wait);
+ if (ret) {
+ dev_err(priv->dev,
+ "Failed to quiescence M4 platform!\n");
+ return ret;
+ }
+ }
+
ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
dcfg->src_stop);
break;
@@ -992,6 +1027,10 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
break;
}
+ priv->gpr = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,iomuxc-gpr");
+ if (IS_ERR(priv->gpr))
+ priv->gpr = NULL;
+
regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
if (IS_ERR(regmap)) {
dev_err(dev, "failed to find syscon\n");
@@ -1001,6 +1040,19 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
priv->regmap = regmap;
regmap_attach_dev(dev, regmap, &config);
+ if (priv->gpr) {
+ ret = regmap_read(priv->gpr, dcfg->gpr_reg, &val);
+ if (val & dcfg->gpr_wait) {
+ /*
+ * After cold boot, the CM indicates its in wait
+ * state, but not fully powered off. Power it off
+ * fully so firmware can be loaded into it.
+ */
+ imx_rproc_stop(priv->rproc);
+ return 0;
+ }
+ }
+
ret = regmap_read(regmap, dcfg->src_reg, &val);
if (ret) {
dev_err(dev, "Failed to read src\n");
@@ -1142,6 +1194,8 @@ static const struct of_device_id imx_rproc_of_match[] = {
{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
{ .compatible = "fsl,imx8mn-cm7", .data = &imx_rproc_cfg_imx8mn },
{ .compatible = "fsl,imx8mp-cm7", .data = &imx_rproc_cfg_imx8mn },
+ { .compatible = "fsl,imx8mn-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
+ { .compatible = "fsl,imx8mp-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
{ .compatible = "fsl,imx8qxp-cm4", .data = &imx_rproc_cfg_imx8qxp },
{ .compatible = "fsl,imx8qm-cm4", .data = &imx_rproc_cfg_imx8qm },
{ .compatible = "fsl,imx8ulp-cm33", .data = &imx_rproc_cfg_imx8ulp },
diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
index 1c7e2127c7584..79a1b8956d142 100644
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@@ -31,6 +31,8 @@ struct imx_rproc_dcfg {
u32 src_mask;
u32 src_start;
u32 src_stop;
+ u32 gpr_reg;
+ u32 gpr_wait;
const struct imx_rproc_att *att;
size_t att_size;
enum imx_rproc_method method;
--
2.40.1
More information about the linux-arm-kernel
mailing list