[PATCH v2] arm64: dts: imx8mp: use correct clock for eqos timestamping counter

[Johannes Zink]

Hi everyone,

On 7/22/23 03:49, Fabio Estevam wrote:
> On Fri, Jul 21, 2023 at 12:51 AM Johannes Zink <j.zink at pengutronix.de> wrote:
>>
>> The i.MX8MP Reference Manual rev 1 06/2021, section 11.7.2.5 "Timestamp
>> Support" indicates the PTP timestamp clock expects a typical frequency
>> of 125MHz.
>>
>> As this also improves the precision of the measured timestamps: assign
>> appropriate 125MHz Clock parent. As no one except the timestamping
>> counter uses this clock, there are no side-effects of this change in
>> other peripherals.
>>
>> Signed-off-by: Johannes Zink <j.zink at pengutronix.de>
> 
> Reviewed-by: Fabio Estevam <festevam at gmail.com>
> 
> 

please scratch this patch, the PTP Timestamping clock cannot be supplied with a 
125MHz clock, there is no 125MHz source in the MUX input and I misinterpreted 
the clocksummary when testing this patch.

Sorry for the noise,
Johannes


-- 
Pengutronix e.K.                | Johannes Zink                  |
Steuerwalder Str. 21            | https://www.pengutronix.de/    |
31137 Hildesheim, Germany       | Phone: +49-5121-206917-0       |
Amtsgericht Hildesheim, HRA 2686| Fax:   +49-5121-206917-5555    |