[PATCH v4 5/6] arm64: dts: mediatek: Replace deprecated extcon-usb-gpio id-gpio/vbus-gpio properties

[Alexander Stein]

Use id-gpios and vbus-gpios instead.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
Reviewed-by: Matthias Brugger <matthias.bgg at gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
Acked-by: Shawn Guo <shawnguo at kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm64/boot/dts/mediatek/mt2712-evb.dts | 4 ++--
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
index fffdb7bbf889..0c38f7b51763 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt2712-evb.dts
@@ -43,12 +43,12 @@ cpus_fixed_vproc1: regulator-vproc-buck1 {
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
 	};
 
 	extcon_usb1: extcon_iddig1 {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 14 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 14 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb_p0_vbus: regulator-usb-p0-vbus {
diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 5122963d8743..607d65ddba9e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -41,7 +41,7 @@ hdmi_connector_in: endpoint {
 
 	extcon_usb: extcon_iddig {
 		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		id-gpios = <&pio 16 GPIO_ACTIVE_HIGH>;
 	};
 
 	usb_p1_vbus: regulator at 0 {
-- 
2.34.1