armv5: boot failed with KUNIT tests- PC is at drm_gem_private_object_init
Boris Brezillon
boris.brezillon at collabora.com
Mon Jul 24 00:59:24 PDT 2023
+Christian
On Fri, 21 Jul 2023 14:57:15 +0530
Naresh Kamboju <naresh.kamboju at linaro.org> wrote:
> Following regressions found on Linux next-20230721 tag while booting qemu-armv5
> with Kunit tests enabled.
>
> Regressions found on qemu-armv5:
>
> - boot/clang-nightly-multi_v5_defconfig-65236a87
> - boot/gcc-12-multi_v5_defconfig-65236a87
> - boot/clang-16-multi_v5_defconfig-65236a87
>
>
> Reported-by: Linux Kernel Functional Testing <lkft at linaro.org>
>
> Logs:
> -----
> <6>ok 69 drm_rect
> <6> KTAP version 1
> <6> # Subtest: drm_exec
> <6> 1..6
> <6> ok 1 sanitycheck
> <1>8<--- cut here ---
> <1>Unable to handle kernel NULL pointer dereference at virtual address
> 0000005c when read
> <1>[0000005c] *pgd=00000000
> <0>Internal error: Oops: 5 [#1] PREEMPT ARM
> <4>Modules linked in:
> <4>CPU: 0 PID: 1446 Comm: kunit_try_catch Tainted: G W N
> 6.5.0-rc2-next-20230721 #1
> <4>Hardware name: ARM-Versatile (Device Tree Support)
> <4>PC is at drm_gem_private_object_init+0x58/0x90
> <4>LR is at dma_resv_init+0x1c/0x30
> <4>pc : [<c059484c>] lr : [<c0648b8c>] psr: 60000113
> <4>sp : d0c5de40 ip : d0c5de98 fp : 00000000
> <4>r10: 00000000 r9 : c0370874 r8 : d0811d50
> <4>r7 : c1db06c0 r6 : d0c5df34 r5 : c1194b78 r4 : d0c5de98
> <4>r3 : 00000000 r2 : 00000078 r1 : 00000000 r0 : 00000000
> <4>Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
> <4>Control: 00093177 Table: 00004000 DAC: 00000053
> <1>Register r0 information: NULL pointer
> <1>Register r1 information: NULL pointer
> <1>Register r2 information: non-paged memory
> <1>Register r3 information: NULL pointer
> <1>Register r4 information: 2-page vmalloc region starting at
> 0xd0c5c000 allocated at copy_process+0x174/0xdd0
> <1>Register r5 information: non-slab/vmalloc memory
> <1>Register r6 information: 2-page vmalloc region starting at
> 0xd0c5c000 allocated at copy_process+0x174/0xdd0
> <1>Register r7 information: slab kmalloc-32 start c1db06c0 pointer
> offset 0 size 32
> <1>Register r8 information: 2-page vmalloc region starting at
> 0xd0810000 allocated at copy_process+0x174/0xdd0
> <1>Register r9 information: non-slab/vmalloc memory
> <1>Register r10 information: NULL pointer
> <1>Register r11 information: NULL pointer
> <1>Register r12 information: 2-page vmalloc region starting at
> 0xd0c5c000 allocated at copy_process+0x174/0xdd0
> <0>Process kunit_try_catch (pid: 1446, stack limit = 0x919109bb)
> <0>Stack: (0xd0c5de40 to 0xd0c5e000)
> ...
> <0> drm_gem_private_object_init from test_lock+0x50/0x110
The addition of
if (drm_core_check_feature(dev, DRIVER_GEM_GPUVA))
drm_gem_gpuva_init(obj);
in drm_gem_private_object_init() causes a NULL deref in the
drm_exec::test_lock() path (dev->drv is NULL). I guess the following
dummy drm_driver declaration would fix that
static struct drm_driver drv;
static struct drm_device dev = {
.driver = &drv;
};
but I suspect we'll hit new failures/crashes if we keep adding stuff to
drm_gem_private_object_init(), so I'm wondering if it wouldn't be
preferable to properly initialize/cleanup the drm_device in drm_exec's
tests.
> <0> test_lock from kunit_generic_run_threadfn_adapter+0x14/0x20
> <0> kunit_generic_run_threadfn_adapter from kthread+0xe8/0x118
> <0> kthread from ret_from_fork+0x14/0x2c
> <0>Exception stack(0xd0c5dfb0 to 0xd0c5dff8)
> <0>dfa0: 00000000 00000000 00000000 00000000
> <0>dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> <0>dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
> <0>Code: e3500000 05846098 e5950018 e5951034 (e590005c)
> <4>---[ end trace 0000000000000000 ]---
> <3> # test_lock: try timed out
> <4>------------[ cut here ]------------
> <4>WARNING: CPU: 0 PID: 1 at lib/refcount.c:25 kthread_stop+0xf8/0x12c
> <4>refcount_t: addition on 0; use-after-free.
> <4>Modules linked in:
> <4>CPU: 0 PID: 1 Comm: swapper Tainted: G D W N
> 6.5.0-rc2-next-20230721 #1
> <4>Hardware name: ARM-Versatile (Device Tree Support)
> <4> unwind_backtrace from show_stack+0x10/0x14
> <4> show_stack from dump_stack_lvl+0x2c/0x34
> <4> dump_stack_lvl from __warn+0xb8/0x198
> <4> __warn from warn_slowpath_fmt+0xb4/0x160
> <4> warn_slowpath_fmt from kthread_stop+0xf8/0x12c
> <4> kthread_stop from kunit_try_catch_run+0x110/0x160
> <4> kunit_try_catch_run from kunit_run_tests+0x2d4/0x794
> <4> kunit_run_tests from __kunit_test_suites_init+0xac/0x168
> <4> __kunit_test_suites_init from kunit_run_all_tests+0xa8/0x244
> <4> kunit_run_all_tests from kernel_init_freeable+0x98/0xf0
> <4> kernel_init_freeable from kernel_init+0x10/0x17c
> <4> kernel_init from ret_from_fork+0x14/0x2c
> <4>Exception stack(0xd0811fb0 to 0xd0811ff8)
> <4>1fa0: 00000000 00000000 00000000 00000000
> <4>1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> <4>1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> <4>---[ end trace 0000000000000000 ]---
> <1>8<--- cut here ---
> <1>Unable to handle kernel NULL pointer dereference at virtual address
> 00000000 when read
> <1>[00000000] *pgd=00000000
> <0>Internal error: Oops: 5 [#2] PREEMPT ARM
> <4>Modules linked in:
> <4>CPU: 0 PID: 1 Comm: swapper Tainted: G D W N
> 6.5.0-rc2-next-20230721 #1
> <4>Hardware name: ARM-Versatile (Device Tree Support)
> <4>PC is at kthread_stop+0x58/0x12c
> <4>LR is at __warn+0x12c/0x198
> <4>pc : [<c0040b8c>] lr : [<c001fbbc>] psr: 20000193
> <4>sp : d0811cc8 ip : 60000113 fp : 00000001
> <4>r10: d0811d5c r9 : d0811d50 r8 : 00000001
> <4>r7 : 00000000 r6 : 00000000 r5 : c1d8c780 r4 : c1d8c910
> <4>r3 : 00000200 r2 : 00000000 r1 : 20000193 r0 : 20000113
> <4>Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none
> <4>Control: 00093177 Table: 00004000 DAC: 00000053
> <1>Register r0 information: non-paged memory
> <1>Register r1 information: non-paged memory
> <1>Register r2 information: NULL pointer
> <1>Register r3 information: non-paged memory
> <1>Register r4 information: slab task_struct start c1d8c780 pointer
> offset 400 size 1664
> <1>Register r5 information: slab task_struct start c1d8c780 pointer
> offset 0 size 1664
> <1>Register r6 information: NULL pointer
> <1>Register r7 information: NULL pointer
> <1>Register r8 information: non-paged memory
> <1>Register r9 information: 2-page vmalloc region starting at
> 0xd0810000 allocated at copy_process+0x174/0xdd0
> <1>Register r10 information: 2-page vmalloc region starting at
> 0xd0810000 allocated at copy_process+0x174/0xdd0
> <1>Register r11 information: non-paged memory
> <1>Register r12 information: non-paged memory
> <0>Process swapper (pid: 1, stack limit = 0x541f52e4)
> <0>Stack: (0xd0811cc8 to 0xd0812000)
>
> ...
> <0> kthread_stop from kunit_try_catch_run+0x110/0x160
> <0> kunit_try_catch_run from kunit_run_tests+0x2d4/0x794
> <0> kunit_run_tests from __kunit_test_suites_init+0xac/0x168
> <0> __kunit_test_suites_init from kunit_run_all_tests+0xa8/0x244
> <0> kunit_run_all_tests from kernel_init_freeable+0x98/0xf0
> <0> kernel_init_freeable from kernel_init+0x10/0x17c
> <0> kernel_init from ret_from_fork+0x14/0x2c
> <0>Exception stack(0xd0811fb0 to 0xd0811ff8)
> <0>1fa0: 00000000 00000000 00000000 00000000
> <0>1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
> <0>1fe0: 00000000 00000000 00000000 00000000 00000013 00000000
> <0>Code: e5956418 e10f0000 e3801080 e121f001 (e5961000)
> <4>---[ end trace 0000000000000000 ]---
> <6>note: swapper[1] exited with irqs disabled
> <0>Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
> <0>---[ end Kernel panic - not syncing: Attempted to kill init!
> exitcode=0x0000000b ]---
>
>
>
> Links,
> ------
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230721/testrun/18492909/suite/boot/test/clang-16-multi_v5_defconfig-65236a87/log
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230721/testrun/18492909/suite/boot/test/clang-16-multi_v5_defconfig-65236a87/history/
> - vmlinux: https://storage.tuxsuite.com/public/linaro/lkft/builds/2Srmz9NGn2sjobuzFKo0j7pRPMt/vmlinux.xz
> - System.map: https://storage.tuxsuite.com/public/linaro/lkft/builds/2Srmz9NGn2sjobuzFKo0j7pRPMt/System.map
>
>
> # To install tuxrun to your home directory at ~/.local/bin:
> # pip3 install -U --user tuxrun==0.45.0
> #
> # Or install a deb/rpm depending on the running distribution
> # See https://tuxmake.org/install-deb/ or
> # https://tuxmake.org/install-rpm/
> #
> # See https://tuxrun.org/ for complete documentation.
> #
> # Please follow the additional instructions if the tests are related to FVP:
> # https://tuxrun.org/run-fvp/
> #
>
> tuxrun --runtime podman \
> --device qemu-armv5 \
> --kernel https://storage.tuxsuite.com/public/linaro/lkft/builds/2Srmz9NGn2sjobuzFKo0j7pRPMt/zImage
> \
> --modules https://storage.tuxsuite.com/public/linaro/lkft/builds/2Srmz9NGn2sjobuzFKo0j7pRPMt/modules.tar.xz
> \
> --parameters SKIPFILE=skipfile-lkft.yaml \
> --image docker.io/linaro/tuxrun-dispatcher:v0.45.0 \
> --tests kunit \
> --timeouts boot=30
>
>
> --
> Linaro LKFT
> https://lkft.linaro.org
More information about the linux-arm-kernel
mailing list