[PATCH V3 4/8] firmware: imx: scu: use soc name for soc_id

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Same as soc-imx8m and soc-imx driver, use soc name for soc_id

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 drivers/firmware/imx/imx-scu-soc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/firmware/imx/imx-scu-soc.c b/drivers/firmware/imx/imx-scu-soc.c
index ef9103987e76..cb8377670a7d 100644
--- a/drivers/firmware/imx/imx-scu-soc.c
+++ b/drivers/firmware/imx/imx-scu-soc.c
@@ -107,10 +107,12 @@ int imx_scu_soc_init(struct device *dev)
 		return -EINVAL;
 
 	/* format soc_id value passed from SCU firmware */
-	val = id & 0x1f;
-	soc_dev_attr->soc_id = devm_kasprintf(dev, GFP_KERNEL, "0x%x", val);
-	if (!soc_dev_attr->soc_id)
-		return -ENOMEM;
+	if (of_machine_is_compatible("fsl,imx8qm"))
+		soc_dev_attr->soc_id = "i.MX8QM";
+	else if (of_machine_is_compatible("fsl,imx8qxp"))
+		soc_dev_attr->soc_id = "i.MX8QXP";
+	else if (of_machine_is_compatible("fsl,imx8dxl"))
+		soc_dev_attr->soc_id = "i.MX8DXL";
 
 	/* format revision value passed from SCU firmware */
 	val = (id >> 5) & 0xf;
-- 
2.37.1