[PATCH v5] ARM: dts: bcm5301x: Add SEAMA compatibles

[Linus Walleij]

This adds SEAMA compatibles to the firmware partition of these
two D-Link devices.

Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
This type of firmware partition appear in some devices in
NAND flash, so we need to be able to tag the partitions
with the appropriate type.

The origin of the "SEAttle iMAge" is unknown.
---
Changes in v5:
- Resend just the ARM DTS change
- Link to v4: https://lore.kernel.org/r/20230713-seama-partitions-v4-0-69e577453d40@linaro.org

Changes in v4:
- Drop the false tagging of #address-cells etc
- Link to v3: https://lore.kernel.org/r/20230707-seama-partitions-v3-0-6aa9391b46bb@linaro.org

Changes in v3:
- Drop reference from partitions.yaml again
- Drop select: false
- Use unevaluatedProperties
- Link to v2: https://lore.kernel.org/r/20230705-seama-partitions-v2-0-9d349f0d5ab7@linaro.org

Changes in v2:
- Make the binding clearly childless
- Link to v1: https://lore.kernel.org/r/20230506-seama-partitions-v1-0-5806af1e4ac7@linaro.org
---
The required bindings are applied to the MTD tree.
---
 arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts | 1 +
 arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
index 51ce510b3e3a..c914569ddd5e 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-885l.dts
@@ -33,6 +33,7 @@ partitions {
 				#size-cells = <1>;
 
 				partition at 0 {
+					compatible = "seama";
 					label = "firmware";
 					reg = <0x00000000 0x08000000>;
 				};
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
index 60744f82c2b7..f050acbea0b2 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-dlink-dir-890l.dts
@@ -149,6 +149,7 @@ partitions {
 		 * partitions: this device uses SEAMA.
 		 */
 		firmware at 0 {
+			compatible = "seama";
 			label = "firmware";
 			reg = <0x00000000 0x08000000>;
 		};

---
base-commit: 1d5653084d36db5cb55ff359bf74e8e721165bb8
change-id: 20230506-seama-partitions-b620117b9985

Best regards,
-- 
Linus Walleij <linus.walleij at linaro.org>