[PATCH RFT] ARM: dts: samsung: exynos4412-midas: add USB connector and USB OTG

[Krzysztof Kozlowski]

Add full description of USB-MUIC and MUIC-MHL connections, along with
proper USB connector and OTG mode for DWC2 USB controller.

This fixes dtc W=1 warnings:

  Warning (graph_child_address): /i2c-mhl/hdmi-bridge at 39/ports: graph node has single child node 'port at 0', #address-cells/#size-cells are not necessary

Cc: Marek Szyprowski <m.szyprowski at samsung.com>
Cc: replicant at osuosl.org
Cc: phone-devel at vger.kernel.org
Cc: ~postmarketos/upstreaming at lists.sr.ht
Cc: Martin Jücker <martin.juecker at gmail.com>
Cc: Henrik Grimler <henrik at grimler.se>
Cc: Artur Weber <aweber.kernel at gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Not tested on hardware. Please kindly check if peripheral mode is not
broken. Or maybe OTG started to work?
---
 .../boot/dts/samsung/exynos4412-midas.dtsi    | 46 ++++++++++++++++++-
 1 file changed, 45 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
index 57836d5554d0..6057f9d9811e 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-midas.dtsi
@@ -182,6 +182,34 @@ pmic at 66 {
 			pinctrl-0 = <&max77693_irq>;
 			reg = <0x66>;
 
+			connector {
+				compatible = "samsung,usb-connector-11pin",
+					     "usb-b-connector";
+				label = "micro-USB";
+				type = "micro";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port at 0 {
+						reg = <0>;
+
+						muic_to_usb: endpoint {
+							remote-endpoint = <&usb_to_muic>;
+						};
+					};
+
+					port at 3 {
+						reg = <3>;
+
+						muic_to_mhl: endpoint {
+							remote-endpoint = <&mhl_to_muic>;
+						};
+					};
+				};
+			};
+
 			regulators {
 				esafeout1_reg: ESAFEOUT1 {
 					regulator-name = "ESAFEOUT1";
@@ -287,6 +315,14 @@ mhl_to_hdmi: endpoint {
 						remote-endpoint = <&hdmi_to_mhl>;
 					};
 				};
+
+				port at 1 {
+					reg = <1>;
+
+					mhl_to_muic: endpoint {
+						remote-endpoint = <&muic_to_mhl>;
+					};
+				};
 			};
 		};
 	};
@@ -545,8 +581,16 @@ hdmi_to_mhl: endpoint {
 &hsotg {
 	vusb_d-supply = <&ldo15_reg>;
 	vusb_a-supply = <&ldo12_reg>;
-	dr_mode = "peripheral";
+	dr_mode = "otg";
+	role-switch-default-mode = "peripheral";
+	usb-role-switch;
 	status = "okay";
+
+	port {
+		usb_to_muic: endpoint {
+			remote-endpoint = <&muic_to_usb>;
+		};
+	};
 };
 
 &i2c_0 {
-- 
2.34.1