[PATCH v6 2/3] ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM support

[Krzysztof Kozlowski]

On 21/07/2023 12:33, James Hilliard wrote:
> This patch adds support for the Variscite VAR_SOM-MX6 SoM with :
> - i.MX6 Quad or Dual Lite SoC
> - 256 – 4096 MB DDR3
> - 4-64 GB eMMC
> - 128 – 1024 MB SLC NAND
> - Camera Interface
> - HDMI+CEC interface
> - LVDS / DSI / Parallel RGB interfaces
> - Ethernet RGMII interface
> - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module
> - SD/MMC/SDIO interface
> - USB Host + USB OTG interface
> - I2C interfaces
> - SPI interfaces
> - PCI-Express 2.0 interface
> - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface
> - Digital Audio interface
> - S/PDIF interface
> 
> Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/
> 
> Support is handled with a SoM-centric dtsi exporting the default interfaces
> along the default pinmuxing to be enabled by the board dts file.
> 
> This file is based on the one provided by Variscite on their own
> kernel, but adapted for mainline.
> 
> Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
> Signed-off-by: James Hilliard <james.hilliard1 at gmail.com>
> ---
>  .../arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 544 ++++++++++++++++++
>  1 file changed, 544 insertions(+)
>  create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> 
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> new file mode 100644
> index 000000000000..a7d2aecd83fe
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> @@ -0,0 +1,544 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite VAR-SOM-MX6 Module
> + *
> + * Copyright 2011 Linaro Ltd.
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright (C) 2014-2016 Variscite, Ltd.
> + * Author: Donio Ron <ron.d at variscite.com>
> + * Copyright 2022 Bootlin
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include <dt-bindings/clock/imx6qdl-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> +	model = "Variscite VAR-SOM-MX6 module";
> +	compatible = "variscite,var-som-imx6q", "fsl,imx6q";
> +
> +	chosen {
> +		stdout-path = &uart1;
> +	};
> +
> +	memory at 10000000 {
> +		device_type = "memory";
> +		reg = <0x10000000 0x40000000>;
> +	};
> +
> +	reg_3p3v: regulator-3p3v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "3P3V";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-always-on;
> +	};
> +
> +	reg_3v3_touch: reg-3v3-touch {

The prefix is still different than all others. You used "regulator" in
other places, but here it is "reg". Keep your code consistent.

> +		compatible = "regulator-fixed";
> +		regulator-name = "touch_3v3_supply";
> +		regulator-always-on;

Also, missing constraints.


Best regards,
Krzysztof