[PATCH v5 2/4] ARM: dts: imx6qdl: Add Variscite VAR-SOM-MX6 SoM support
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Fri Jul 21 03:01:02 PDT 2023
On 21/07/2023 11:49, James Hilliard wrote:
> This patch adds support for the Variscite VAR_SOM-MX6 SoM with :
> - i.MX6 Quad or Dual Lite SoC
> - 256 – 4096 MB DDR3
> - 4-64 GB eMMC
> - 128 – 1024 MB SLC NAND
> - Camera Interface
> - HDMI+CEC interface
> - LVDS / DSI / Parallel RGB interfaces
> - Ethernet RGMII interface
> - On-SoM Wi-Fi/Bluetooth with WiLink wl183x SDIO Module
> - SD/MMC/SDIO interface
> - USB Host + USB OTG interface
> - I2C interfaces
> - SPI interfaces
> - PCI-Express 2.0 interface
> - on-SoM Audio Codec with HP/Line-In interfaces + DMIC interface
> - Digital Audio interface
> - S/PDIF interface
>
> Product website : https://www.variscite.com/product/system-on-module-som/cortex-a9/var-som-mx6-cpu-freescale-imx6/
>
> Support is handled with a SoM-centric dtsi exporting the default interfaces
> along the default pinmuxing to be enabled by the board dts file.
>
> This file is based on the one provided by Variscite on their own
> kernel, but adapted for mainline.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement at bootlin.com>
> Signed-off-by: James Hilliard <james.hilliard1 at gmail.com>
> ---
> .../arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi | 550 ++++++++++++++++++
> 1 file changed, 550 insertions(+)
> create mode 100644 arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> new file mode 100644
> index 000000000000..aa1f37e17f62
> --- /dev/null
> +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-var-som.dtsi
> @@ -0,0 +1,550 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Support for Variscite VAR-SOM-MX6 Module
> + *
> + * Copyright 2011 Linaro Ltd.
> + * Copyright 2012 Freescale Semiconductor, Inc.
> + * Copyright (C) 2014-2016 Variscite, Ltd.
> + * Author: Donio Ron <ron.d at variscite.com>
> + * Copyright 2022 Bootlin
> + */
> +
> +/dts-v1/;
> +
> +#include "imx6q.dtsi"
> +#include <dt-bindings/clock/imx6qdl-clock.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/sound/fsl-imx-audmux.h>
> +
> +/ {
> + model = "Variscite VAR-SOM-MX6 module";
> + compatible = "variscite,var-som-imx6q", "fsl,imx6q";
> +
> + chosen {
> + stdout-path = &uart1;
> + };
> +
> + memory at 10000000 {
> + device_type = "memory";
> + reg = <0x10000000 0x40000000>;
> + };
> +
> + reg_audio: regulator-audio {
> + compatible = "regulator-fixed";
> + regulator-name = "tlv320aic3x-supply";
This node looks fake. There is nothing fixed here.
> + };
> +
> + reg_3p3v: regulator-3p3v {
> + compatible = "regulator-fixed";
> + regulator-name = "3P3V";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + touch_3v3_regulator: touch_3v3_regulator {
No underscores in node names. You did receive such comment before, right?
Also, you mix prefix/suffix. Keep one style.
> + compatible = "regulator-fixed";
> + regulator-name = "touch_3v3_supply";
> + regulator-always-on;
> + status = "okay";
Why?
> + };
> +
> + reg_wl18xx_vmmc: regulator-wl18xx {
> + compatible = "regulator-fixed";
> + regulator-name = "vwl1807";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + gpio = <&gpio7 8 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + startup-delay-us = <70000>;
> + };
> +
> + sound: sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "var-som-audio";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&sound_codec>;
> + simple-audio-card,frame-master = <&sound_codec>;
> + simple-audio-card,widgets = "Headphone", "Headphone Jack",
> + "Line", "Line In", "Microphone", "Mic Jack";
> + simple-audio-card,routing = "Headphone Jack", "HPLOUT",
> + "Headphone Jack", "HPROUT",
> + "LINE1L", "Line In",
> + "LINE1R", "Line In";
> +
> + sound_cpu: simple-audio-card,cpu {
> + sound-dai = <&ssi2>;
> + };
> +
> + sound_codec: simple-audio-card,codec {
> + sound-dai = <&tlv320aic3106>;
> + clocks = <&clks IMX6QDL_CLK_CKO>;
> + };
> + };
> +
> + rfkill {
> + compatible = "rfkill-gpio";
> + name = "rfkill";
> + radio-type = "bluetooth";
> + shutdown-gpios = <&gpio6 18 GPIO_ACTIVE_HIGH>;
> + };
> +};
> +
> +&cpu0 {
> + operating-points = <
> + /* kHz uV */
> + 1200000 1350000
> + 996000 1250000
> + 852000 1250000
> + 792000 1175000
> + 396000 1175000
> + >;
> +
> + fsl,soc-operating-points = <
> + /* ARM kHz SOC-PU uV */
> + 1200000 1275000
> + 996000 1250000
> + 852000 1250000
> + 792000 1250000
> + 396000 1250000
> + >;
> +};
> +
> +&audmux {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_audmux>;
> + status = "okay";
> +
> + mux-ssi2 {
> + fsl,audmux-port = <1>;
> + fsl,port-config = <
> + (IMX_AUDMUX_V2_PTCR_SYN |
> + IMX_AUDMUX_V2_PTCR_TFSDIR |
> + IMX_AUDMUX_V2_PTCR_TFSEL(2) |
> + IMX_AUDMUX_V2_PTCR_TCLKDIR |
> + IMX_AUDMUX_V2_PTCR_TCSEL(2))
> + IMX_AUDMUX_V2_PDCR_RXDSEL(2)
> + >;
> + };
> +
> + mux-aud3 {
> + fsl,audmux-port = <2>;
> + fsl,port-config = <
> + IMX_AUDMUX_V2_PTCR_SYN
> + IMX_AUDMUX_V2_PDCR_RXDSEL(1)
> + >;
> + };
> +};
> +
> +&ecspi3 {
> + fsl,spi-num-chipselects = <1>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ecspi3>;
> + cs-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
> + status = "okay";
> +};
> +
> +&fec {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_enet>;
> + phy-mode = "rgmii";
> + phy-handle = <&rgmii_phy>;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rgmii_phy: ethernet-phy at 7 {
> + reg = <7>;
> + reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
> + reset-assert-us = <10000>;
> + };
> + };
> +};
> +
> +&i2c2 {
> + clock-frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + pmic at 8 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pmic>;
> + compatible = "fsl,pfuze100";
> + reg = <0x08>;
> +
> + regulators {
> + sw1a_reg: sw1ab {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw1c_reg: sw1c {
> + regulator-min-microvolt = <300000>;
> + regulator-max-microvolt = <1875000>;
> + regulator-boot-on;
> + regulator-always-on;
> + regulator-ramp-delay = <6250>;
> + };
> +
> + sw2_reg: sw2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3a_reg: sw3a {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw3b_reg: sw3b {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3950000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + sw4_reg: sw4 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <3950000>;
> + };
> +
> + snvs_reg: vsnvs {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <3000000>;
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vref_reg: vrefddr {
> + regulator-boot-on;
> + regulator-always-on;
> + };
> +
> + vgen1_reg: vgen1 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen2_reg: vgen2 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <1550000>;
> + };
> +
> + vgen3_reg: vgen3 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vgen4_reg: vgen4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vgen5_reg: vgen5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + vgen6_reg: vgen6 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> + };
> + };
> +
> + tlv320aic3106: codec at 1b {
> + compatible = "ti,tlv320aic3106";
> + reg = <0x1b>;
> + #sound-dai-cells = <0>;
> + DRVDD-supply = <®_3p3v>;
> + AVDD-supply = <®_3p3v>;
> + IOVDD-supply = <®_3p3v>;
> + DVDD-supply = <®_3p3v>;
> + ai3x-ocmv = <0>;
> + reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
> + ai3x-gpio-func = <
> + 0 /* AIC3X_GPIO1_FUNC_DISABLED */
> + 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */
> + >;
> + };
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog>;
> +
> + pinctrl_hog: hoggrp {
> + fsl,pins = <
> + /* CTW6120 IRQ */
> + MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0xb0b1
> + /* SDMMC2 CD/WP */
> + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
> + >;
> + };
> +
> + pinctrl_audmux: audmux {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
> + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
> + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
> + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
> + /* Audio Clock */
> + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
> + >;
> + };
> +
> + pinctrl_bt: bt {
> + fsl,pins = <
> + /* Bluetooth/wifi enable */
> + MX6QDL_PAD_SD3_DAT6__GPIO6_IO18 0x1b0b1
> + /* Wifi Slow Clock */
> + MX6QDL_PAD_ENET_RXD0__OSC32K_32K_OUT 0x000b0
> + >;
> + };
> +
> + pinctrl_ecspi3: ecspi3grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
> + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
> + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
> + >;
> + };
> +
> + pinctrl_enet: enetgrp {
> + fsl,pins = <
> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
> + >;
> + };
> +
> + pinctrl_enet_irq: enetirqgrp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1
> + >;
> + };
> +
> + pinctrl_i2c1: i2c1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c2: i2c2grp {
> + fsl,pins = <
> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_i2c3: i2c3grp {
> + fsl,pins = <
> + MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
> + MX6QDL_PAD_GPIO_16__I2C3_SDA 0x4001b8b1
> + >;
> + };
> +
> + pinctrl_pmic: pmicgrp {
> + fsl,pins = <
> + /* PMIC INT */
> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
> + >;
> + };
> +
> + pinctrl_pwm2: pwm2grp {
> + fsl,pins = <
> + MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart1: uart1grp {
> + fsl,pins = <
> + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
> + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
> + >;
> + };
> +
> + pinctrl_uart2: uart2grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_DAT4__UART2_RX_DATA 0x1b0b1
> + MX6QDL_PAD_SD3_DAT5__UART2_TX_DATA 0x1b0b1
> + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x1b0b1
> + MX6QDL_PAD_EIM_D29__UART2_RTS_B 0x1b0b1
> + >;
> + };
> +
> + pinctrl_usdhc3: usdhc3grp {
> + fsl,pins = <
> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17069
> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10069
> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17069
> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17069
> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17069
> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17069
> + /* WL_EN */
> + MX6QDL_PAD_SD3_DAT7__GPIO6_IO17 0x13059
> + /* WL_IRQ */
> + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x13059
> + >;
> + };
> +
> + pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
Still wrong name. They should end with grp.
Best regards,
Krzysztof
More information about the linux-arm-kernel
mailing list