[PATCH v2 2/2] remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
Mathieu Poirier
mathieu.poirier at linaro.org
Thu Jul 20 10:07:40 PDT 2023
Hi Marek,
On Thu, Jul 20, 2023 at 02:55:49PM +0200, Marek Vasut wrote:
> The MX8M CM7 boot via SMC call is problematic, since not all versions
> of ATF support this interface. Extend the MMIO support so it can boot
> the CM7 on MX8MN/MP instead and discern the two alternatives using DT
> compatible strings.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Bjorn Andersson <andersson at kernel.org>
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-remoteproc at vger.kernel.org
> ---
> V2: Rename 'gpr' to 'fsl,iomuxc-gpr'
> ---
> drivers/remoteproc/imx_rproc.c | 58 ++++++++++++++++++++++++++++++++--
> drivers/remoteproc/imx_rproc.h | 2 ++
> 2 files changed, 58 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index 4ee2646ce62ad..8bb293b9f327c 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -40,6 +40,12 @@
> #define IMX7D_M4_STOP (IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST | \
> IMX7D_SW_M4C_NON_SCLR_RST)
>
> +#define IMX8M_M7_STOP (IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST)
> +#define IMX8M_M7_POLL IMX7D_ENABLE_M4
> +
> +#define IMX8M_GPR22 0x58
> +#define IMX8M_GPR22_CM7_CPUWAIT BIT(0)
> +
> /* Address: 0x020D8000 */
> #define IMX6SX_SRC_SCR 0x00
> #define IMX6SX_ENABLE_M4 BIT(22)
> @@ -91,6 +97,7 @@ static int imx_rproc_detach_pd(struct rproc *rproc);
> struct imx_rproc {
> struct device *dev;
> struct regmap *regmap;
> + struct regmap *gpr;
> struct rproc *rproc;
> const struct imx_rproc_dcfg *dcfg;
> struct imx_rproc_mem mem[IMX_RPROC_MEM_MAX];
> @@ -285,6 +292,18 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
> { 0x80000000, 0x80000000, 0x60000000, 0 },
> };
>
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn_mmio = {
> + .src_reg = IMX7D_SRC_SCR,
> + .src_mask = IMX7D_M4_RST_MASK,
> + .src_start = IMX7D_M4_START,
> + .src_stop = IMX8M_M7_STOP,
> + .gpr_reg = IMX8M_GPR22,
> + .gpr_wait = IMX8M_GPR22_CM7_CPUWAIT,
> + .att = imx_rproc_att_imx8mn,
> + .att_size = ARRAY_SIZE(imx_rproc_att_imx8mn),
> + .method = IMX_RPROC_MMIO,
> +};
> +
> static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
> .att = imx_rproc_att_imx8mn,
> .att_size = ARRAY_SIZE(imx_rproc_att_imx8mn),
> @@ -365,8 +384,14 @@ static int imx_rproc_start(struct rproc *rproc)
>
> switch (dcfg->method) {
> case IMX_RPROC_MMIO:
> - ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> - dcfg->src_start);
> + if (priv->gpr) {
> + ret = regmap_clear_bits(priv->gpr, dcfg->gpr_reg,
> + dcfg->gpr_wait);
> + } else {
> + ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> + dcfg->src_mask,
> + dcfg->src_start);
> + }
> break;
> case IMX_RPROC_SMC:
> arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, 0, 0, 0, 0, 0, 0, &res);
> @@ -395,6 +420,16 @@ static int imx_rproc_stop(struct rproc *rproc)
>
> switch (dcfg->method) {
> case IMX_RPROC_MMIO:
> + if (priv->gpr) {
> + ret = regmap_set_bits(priv->gpr, dcfg->gpr_reg,
> + dcfg->gpr_wait);
> + if (ret) {
> + dev_err(priv->dev,
> + "Failed to quiescence M4 platform!\n");
> + return ret;
> + }
> + }
> +
> ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> dcfg->src_stop);
> break;
> @@ -992,6 +1027,10 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
> break;
> }
>
> + priv->gpr = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,iomuxc-gpr");
> + if (IS_ERR(priv->gpr))
> + priv->gpr = NULL;
> +
> regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
> if (IS_ERR(regmap)) {
> dev_err(dev, "failed to find syscon\n");
> @@ -1001,6 +1040,19 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
> priv->regmap = regmap;
> regmap_attach_dev(dev, regmap, &config);
>
> + if (priv->gpr) {
> + ret = regmap_read(priv->gpr, dcfg->gpr_reg, &val);
> + if (val & dcfg->gpr_wait) {
> + /*
> + * After cold boot, the CM indicates its in wait
> + * state, but not fully powered off. Power it off
> + * fully so firmware can be loaded into it.
> + */
> + imx_rproc_stop(priv->rproc);
> + return 0;
> + }
> + }
Thanks for the clarification. I will apply this patch when the DT people have
had the time to review the first patch of this series.
Thanks,
Mathieu
> +
> ret = regmap_read(regmap, dcfg->src_reg, &val);
> if (ret) {
> dev_err(dev, "Failed to read src\n");
> @@ -1142,6 +1194,8 @@ static const struct of_device_id imx_rproc_of_match[] = {
> { .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
> { .compatible = "fsl,imx8mn-cm7", .data = &imx_rproc_cfg_imx8mn },
> { .compatible = "fsl,imx8mp-cm7", .data = &imx_rproc_cfg_imx8mn },
> + { .compatible = "fsl,imx8mn-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
> + { .compatible = "fsl,imx8mp-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
> { .compatible = "fsl,imx8qxp-cm4", .data = &imx_rproc_cfg_imx8qxp },
> { .compatible = "fsl,imx8qm-cm4", .data = &imx_rproc_cfg_imx8qm },
> { .compatible = "fsl,imx8ulp-cm33", .data = &imx_rproc_cfg_imx8ulp },
> diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
> index 1c7e2127c7584..79a1b8956d142 100644
> --- a/drivers/remoteproc/imx_rproc.h
> +++ b/drivers/remoteproc/imx_rproc.h
> @@ -31,6 +31,8 @@ struct imx_rproc_dcfg {
> u32 src_mask;
> u32 src_start;
> u32 src_stop;
> + u32 gpr_reg;
> + u32 gpr_wait;
> const struct imx_rproc_att *att;
> size_t att_size;
> enum imx_rproc_method method;
> --
> 2.40.1
>
More information about the linux-arm-kernel
mailing list