[PATCH v3 1/2] PCI: dwc: Implement general suspend/resume functionality for L2/L3 transitions

[Bjorn Helgaas]

On Thu, Jul 20, 2023 at 09:37:38PM +0530, Manivannan Sadhasivam wrote:
> On Thu, Jul 20, 2023 at 10:37:36AM -0400, Frank Li wrote:
> > On Thu, Jul 20, 2023 at 07:55:09PM +0530, Manivannan Sadhasivam wrote:
> > > On Tue, Jul 18, 2023 at 03:34:26PM +0530, Manivannan Sadhasivam wrote:
> > > > On Mon, Jul 17, 2023 at 02:36:19PM -0400, Frank Li wrote:
> > > > > On Mon, Jul 17, 2023 at 10:15:26PM +0530, Manivannan Sadhasivam wrote:
> > > > > > On Wed, Apr 19, 2023 at 12:41:17PM -0400, Frank Li wrote:
> > > > > > > Introduced helper function dw_pcie_get_ltssm to retrieve SMLH_LTSS_STATE.
> > > > > > > Added API pme_turn_off and exit_from_l2 for managing L2/L3 state transitions.
> > > > > > > 
> > > > > > > Typical L2 entry workflow:
> > > > > > > 
> > > > > > > 1. Transmit PME turn off signal to PCI devices.
> > > > > > > 2. Await link entering L2_IDLE state.
> > > > > > 
> > > > > > AFAIK, typical workflow is to wait for PME_To_Ack.
> > > > > 
> > > > > 1 Already wait for PME_to_ACK,  2, just wait for link actual enter L2.
> > > > > I think PCI RC needs some time to set link enter L2 after get ACK from
> > > > > PME.
> > > 
> > > One more comment. If you transition the device to L2/L3, then it
> > > can lose power if Vaux was not provided. In that case, can all
> > > the devices work after resume?  Most notably NVMe?
> > 
> > I have not hardware to do such test, NVMe driver will reinit
> > everything after resume if no L1.1\L1.2 support. If there are
> > L1.1\L1.2, NVME expect it leave at L1.2 at suspend to get better
> > resume latency.
> 
> To be precise, NVMe driver will shutdown the device if there is no
> ASPM support and keep it in low power mode otherwise (there are
> other cases as well but we do not need to worry).
> 
> But here you are not checking for ASPM state in the suspend path,
> and just forcing the link to be in L2/L3 (thereby D3Cold) even
> though NVMe driver may expect it to be in low power state like
> ASPM/APST.
> 
> So you should only put the link to L2/L3 if there is no ASPM
> support. Otherwise, you'll ending up with bug reports when users
> connect NVMe to it.

Can you point me to the NVMe code that shuts down the device if
there's no ASPM support?  That sounds interesting and of interest to
other drivers that want to do suspend.

Bjorn