[PATCH v2] clk: meson: change usleep_range() to udelay() for atomic context
Jerome Brunet
jbrunet at baylibre.com
Thu Jul 20 02:32:44 PDT 2023
On Wed 05 Jul 2023 at 00:54, Dmitry Rokosov <ddrokosov at sberdevices.ru> wrote:
> The function meson_clk_pll_enable() can be invoked under the enable_lock
> spinlock from the clk core logic, which risks a kernel panic during the
> usleep_range() call:
>
> BUG: scheduling while atomic: kworker/u4:2/36/0x00000002
> Modules linked in: g_ffs usb_f_fs libcomposite
> CPU: 1 PID: 36 Comm: kworker/u4:2 Not tainted 6.4.0-rc5 #273
> Workqueue: events_unbound async_run_entry_fn
> Call trace:
> dump_backtrace+0x9c/0x128
> show_stack+0x20/0x38
> dump_stack_lvl+0x48/0x60
> dump_stack+0x18/0x28
> __schedule_bug+0x58/0x78
> __schedule+0x828/0xa88
> schedule+0x64/0xd8
> schedule_hrtimeout_range_clock+0xd0/0x208
> schedule_hrtimeout_range+0x1c/0x30
> usleep_range_state+0x6c/0xa8
> meson_clk_pll_enable+0x1f4/0x310
> clk_core_enable+0x78/0x200
> clk_core_enable+0x58/0x200
> clk_core_enable+0x58/0x200
> clk_core_enable+0x58/0x200
> clk_enable+0x34/0x60
>
> So it is required to use the udelay() function instead of usleep_range()
> for the atomic context safety.
>
> Fixes: b6ec400aa153 ("clk: meson: introduce new pll power-on sequence for A1 SoC family")
> Reported-by: Jan Dakinevich <yvdakinevich at sberdevices.ru>
> Signed-off-by: Dmitry Rokosov <ddrokosov at sberdevices.ru>
Applied, Thx
> ---
> Changes v2 since v1 at [1]:
> - remove redundant SoB from commit msg
> - drop unuseful reference to clk_core_enable() from commit msg
>
> Links:
> [1] https://lore.kernel.org/all/20230703200404.20361-1-ddrokosov@sberdevices.ru/
> ---
> drivers/clk/meson/clk-pll.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
> index 56ec2210f1ad..eef6f37c8d8d 100644
> --- a/drivers/clk/meson/clk-pll.c
> +++ b/drivers/clk/meson/clk-pll.c
> @@ -367,9 +367,9 @@ static int meson_clk_pll_enable(struct clk_hw *hw)
> * 3. enable the lock detect module
> */
> if (MESON_PARM_APPLICABLE(&pll->current_en)) {
> - usleep_range(10, 20);
> + udelay(10);
> meson_parm_write(clk->map, &pll->current_en, 1);
> - usleep_range(40, 50);
> + udelay(40);
> };
>
> if (MESON_PARM_APPLICABLE(&pll->l_detect)) {
More information about the linux-arm-kernel
mailing list