[PATCH v3 2/2] PCI: layerscape: Add the workaround for lost link capabilities during reset.
Frank Li
Frank.li at nxp.com
Wed Jul 19 15:23:30 PDT 2023
On Wed, Jul 19, 2023 at 11:57:07AM -0400, Frank Li wrote:
> From: Xiaowei Bao <xiaowei.bao at nxp.com>
>
> A workaround for the issue where the PCI Express Endpoint (EP) controller
> loses the values of the Maximum Link Width and Supported Link Speed from
> the Link Capabilities Register, which initially configured by the Reset
> Configuration Word (RCW) during a link-down or hot reset event.
>
> Fixes: a805770d8a22 ("PCI: layerscape: Add EP mode support")
> Acked-by: Manivannan Sadhasivam <mani at kernel.org>
> Signed-off-by: Xiaowei Bao <xiaowei.bao at nxp.com>
> Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
> Signed-off-by: Frank Li <Frank.Li at nxp.com>
> ---
> change from v2 to v3
> - fix subject typo capabilities
> change from v1 to v2:
> - add comments at restore register
> - add fixes tag
> - dw_pcie_writew_dbi to dw_pcie_writel_dbi
>
> .../pci/controller/dwc/pci-layerscape-ep.c | 21 ++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index e0969ff2ddf7..39dbd911c3f8 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -45,6 +45,7 @@ struct ls_pcie_ep {
> struct pci_epc_features *ls_epc;
> const struct ls_pcie_ep_drvdata *drvdata;
> int irq;
> + u32 lnkcap;
> bool big_endian;
> };
>
> @@ -73,6 +74,7 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> struct ls_pcie_ep *pcie = dev_id;
> struct dw_pcie *pci = pcie->pci;
> u32 val, cfg;
> + u8 offset;
>
> val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> @@ -81,12 +83,25 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
> return IRQ_NONE;
>
> if (val & PEX_PF0_PME_MES_DR_LUD) {
> +
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> +
> + /*
> + * The values of the Maximum Link Width and Supported Link
> + * Speed from the Link Capabilities Register will be lost
> + * during link down or hot reset. Restore initial value
> + * that configured by the Reset Configuration Word (RCW).
> + */
> + dw_pcie_dbi_ro_wr_en(pci);
> + dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
> + dw_pcie_dbi_ro_wr_dis(pci);
> +
> cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> cfg |= PEX_PF0_CFG_READY;
> ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> dw_pcie_ep_linkup(&pci->ep);
>
> - dev_dbg(pci->dev, "Link up\n");
> + dev_err(pci->dev, "Link up\n");
Sorry, Just found that. mistake merge a debug code.
It should be dev_dbg here, will send update patch soon
Frank
> } else if (val & PEX_PF0_PME_MES_DR_LDD) {
> dev_dbg(pci->dev, "Link down\n");
> pci_epc_linkdown(pci->ep.epc);
> @@ -216,6 +231,7 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
> struct ls_pcie_ep *pcie;
> struct pci_epc_features *ls_epc;
> struct resource *dbi_base;
> + u8 offset;
> int ret;
>
> pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
> @@ -252,6 +268,9 @@ static int __init ls_pcie_ep_probe(struct platform_device *pdev)
>
> platform_set_drvdata(pdev, pcie);
>
> + offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> + pcie->lnkcap = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> +
> ret = dw_pcie_ep_init(&pci->ep);
> if (ret)
> return ret;
> --
> 2.34.1
>
More information about the linux-arm-kernel
mailing list