[PATCH v9 1/5] staging: vc04_services: vchiq_arm: Add new bus type and device type

Stefan Wahren stefan.wahren at i2se.com
Wed Jul 19 10:51:50 PDT 2023


Hi Umang,

Am 19.07.23 um 18:44 schrieb Umang Jain:
> The devices that the vchiq interface registers (bcm2835-audio,
> bcm2835-camera) are implemented and exposed by the VC04 firmware.
> The device tree describes the VC04 itself with the resources required
> to communicate with it through a mailbox interface. However, the
> vchiq interface registers these devices as platform devices. This
> also means the specific drivers for these devices are getting
> registered as platform drivers. This is not correct and a blatant
> abuse of platform device/driver.
> 
> Add a new bus type, vchiq_bus_type and device type (struct vchiq_device)
> which will be used to migrate child devices that the vchiq interfaces
> creates/registers from the platform device/driver.
> 
> Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
> ---
>   drivers/staging/vc04_services/Makefile        |   1 +
>   .../interface/vchiq_arm/vchiq_device.c        | 102 ++++++++++++++++++
>   .../interface/vchiq_arm/vchiq_device.h        |  54 ++++++++++
>   3 files changed, 157 insertions(+)
>   create mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
>   create mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.h
> 
> diff --git a/drivers/staging/vc04_services/Makefile b/drivers/staging/vc04_services/Makefile
> index 44794bdf6173..2d071e55e175 100644
> --- a/drivers/staging/vc04_services/Makefile
> +++ b/drivers/staging/vc04_services/Makefile
> @@ -5,6 +5,7 @@ vchiq-objs := \
>      interface/vchiq_arm/vchiq_core.o  \
>      interface/vchiq_arm/vchiq_arm.o \
>      interface/vchiq_arm/vchiq_debugfs.o \
> +   interface/vchiq_arm/vchiq_device.o \
>      interface/vchiq_arm/vchiq_connected.o \
>   
>   ifdef CONFIG_VCHIQ_CDEV
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
> new file mode 100644
> index 000000000000..d7dfe4173579
> --- /dev/null
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
> @@ -0,0 +1,102 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * vchiq_device.c - VCHIQ generic device and bus-type
> + *
> + * Copyright (c) 2023 Ideas On Board Oy
> + */
> +
> +#include <linux/device/bus.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +
> +#include "vchiq_device.h"
> +
> +static int vchiq_bus_type_match(struct device *dev, struct device_driver *drv)
> +{
> +	if (dev->bus == &vchiq_bus_type &&
> +	    strcmp(dev_name(dev), drv->name) == 0)
> +		return 1;
> +
> +	return 0;
> +}
> +
> +static int vchiq_bus_uevent(const struct device *dev, struct kobj_uevent_env *env)
> +{
> +	const struct vchiq_device *device = container_of_const(dev, struct vchiq_device, dev);
> +
> +	return add_uevent_var(env, "MODALIAS=%s", dev_name(&device->dev));
> +}
> +
> +static int vchiq_bus_probe(struct device *dev)
> +{
> +	struct vchiq_device *device = to_vchiq_device(dev);
> +	struct vchiq_driver *driver = to_vchiq_driver(dev->driver);
> +	int ret;
> +
> +	ret = driver->probe(device);
> +	if (ret == 0)
> +		return 0;
> +
> +	return ret;

Why not returning the result of probe directly?

> +}
> +
> +struct bus_type vchiq_bus_type = {
> +	.name   = "vchiq-bus",
> +	.match  = vchiq_bus_type_match,
> +	.uevent = vchiq_bus_uevent,
> +	.probe  = vchiq_bus_probe,
> +};
> +
> +static void vchiq_device_release(struct device *dev)
> +{
> +	struct vchiq_device *device = to_vchiq_device(dev);
> +
> +	kfree(device);
> +}
> +
> +struct vchiq_device *
> +vchiq_device_register(struct device *parent, const char *name)
> +{
> +	struct vchiq_device *device;
> +	int ret;
> +
> +	device = kzalloc(sizeof(*device), GFP_KERNEL);
> +	if (!device) {
> +		dev_err(parent, "Cannot register %s: Insufficient memory\n",
> +			name);
> +		return NULL;
> +	}
> +
> +	device->dev.init_name = name;
> +	device->dev.parent = parent;
> +	device->dev.bus = &vchiq_bus_type;
> +	device->dev.release = vchiq_device_release;

Not sure, but maybe a good place to set the DMA mask?

> +
> +	ret = device_register(&device->dev);
> +	if (ret) {
> +		dev_err(parent, "Cannot register %s: %d\n", name, ret);
> +		put_device(&device->dev);
> +		return NULL;
> +	}
> +
> +	return device;
> +}
> +
> +void vchiq_device_unregister(struct vchiq_device *vchiq_dev)
> +{
> +	device_unregister(&vchiq_dev->dev);
> +}
> +
> +int vchiq_driver_register(struct vchiq_driver *vchiq_drv)
> +{
> +	vchiq_drv->driver.bus = &vchiq_bus_type;
> +
> +	return driver_register(&vchiq_drv->driver);
> +}
> +EXPORT_SYMBOL_GPL(vchiq_driver_register);
> +
> +void vchiq_driver_unregister(struct vchiq_driver *vchiq_drv)
> +{
> +	driver_unregister(&vchiq_drv->driver);
> +}
> +EXPORT_SYMBOL_GPL(vchiq_driver_unregister);
> diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.h b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.h
> new file mode 100644
> index 000000000000..7eaaf9a91cda
> --- /dev/null
> +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.h
> @@ -0,0 +1,54 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2023 Ideas On Board Oy
> + */
> +
> +#ifndef _VCHIQ_DEVICE_H
> +#define _VCHIQ_DEVICE_H
> +
> +#include <linux/device.h>
> +
> +struct vchiq_device {
> +	struct device dev;
> +};
> +
> +struct vchiq_driver {
> +	int		(*probe)(struct vchiq_device *device);
> +	void		(*remove)(struct vchiq_device *device);
> +	int		(*resume)(struct vchiq_device *device);
> +	int		(*suspend)(struct vchiq_device *device,
> +				   pm_message_t state);
> +	struct device_driver driver;
> +};
> +
> +static inline struct vchiq_device *to_vchiq_device(struct device *d)
> +{
> +	return container_of(d, struct vchiq_device, dev);
> +}
> +
> +static inline struct vchiq_driver *to_vchiq_driver(struct device_driver *d)
> +{
> +	return container_of(d, struct vchiq_driver, driver);
> +}
> +
> +extern struct bus_type vchiq_bus_type;
> +
> +struct vchiq_device *
> +vchiq_device_register(struct device *parent, const char *name);
> +void vchiq_device_unregister(struct vchiq_device *dev);
> +
> +int vchiq_driver_register(struct vchiq_driver *vchiq_drv);
> +void vchiq_driver_unregister(struct vchiq_driver *vchiq_drv);
> +
> +/**
> + * module_vchiq_driver() - Helper macro for registering a vchiq driver
> + * @__vchiq_driver: vchiq driver struct
> + *
> + * Helper macro for vchiq drivers which do not do anything special in
> + * module init/exit. This eliminates a lot of boilerplate. Each module may only
> + * use this macro once, and calling it replaces module_init() and module_exit()
> + */
> +#define module_vchiq_driver(__vchiq_driver) \
> +	module_driver(__vchiq_driver, vchiq_driver_register, vchiq_driver_unregister)
> +
> +#endif /* _VCHIQ_DEVICE_H */



More information about the linux-arm-kernel mailing list