[PATCH] arm64: dts: imx8mp: use correct clock for eqos timestamping counter
Johannes Zink
j.zink at pengutronix.de
Wed Jul 19 07:12:29 PDT 2023
Hi Fabio,
On 7/19/23 16:03, Fabio Estevam wrote:
> Hi Johannes,
>
> On Wed, Jul 19, 2023 at 10:59 AM Johannes Zink <j.zink at pengutronix.de> wrote:
>>
>> The i.MX8MP Reference Manual rev 1 06/2021, section 11.7.2.5 "Timestamp
>> Support" indicates the PTP timestamp clock expects a typical frequency
>> of 125MHz.
>>
>> As this also improves the precision of the measured timestamps: assign
>> appropriate 125MHz Clock parent. As no one except the timestamping
>> counter uses this clock, there are no side-effects of this change in
>> other peripherals.
>>
>> Signed-off-by: Johannes Zink <j.zink at pengutronix.de>
>> ---
>> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
>> index 6f2f50e1639c..7f80dff914c2 100644
>> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
>> @@ -1334,7 +1334,7 @@ eqos: ethernet at 30bf0000 {
>> <&clk IMX8MP_CLK_ENET_QOS_TIMER>,
>> <&clk IMX8MP_CLK_ENET_QOS>;
>> assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_266M>,
>> - <&clk IMX8MP_SYS_PLL2_100M>,
>> + <&clk IMX8MP_SYS_PLL2_125M>,
>> <&clk IMX8MP_SYS_PLL2_125M>;
>> assigned-clock-rates = <0>, <100000000>, <125000000>;
>
> Shouldn't this also be changed to:
>
> assigned-clock-rates = <0>, <125000000>, <125000000>;
>
good catch, thanks! Gonna fix it in v2.
Best regards
Johannes
--
Pengutronix e.K. | Johannes Zink |
Steuerwalder Str. 21 | https://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686| Fax: +49-5121-206917-5555 |
More information about the linux-arm-kernel
mailing list