[PATCH 03/10] arm64: dts: imx8ulp: add thermal node
Shawn Guo
shawnguo at kernel.org
Mon Jul 17 20:30:15 PDT 2023
On Sun, Jun 25, 2023 at 08:42:31PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
>
> Add thermal node. Cooling map is not added, because frequency runtime
> changing not supported for now.
>
> Reviewed-by: Jacky Bai <ping.bai at nxp.com>
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index ba0edb9a009b..fd30475a561d 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -7,6 +7,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/power/imx8ulp-power.h>
> +#include <dt-bindings/thermal/thermal.h>
>
> #include "imx8ulp-pinfunc.h"
>
> @@ -78,6 +79,27 @@ psci {
> method = "smc";
> };
>
> + thermal-zones {
> + cpu-thermal {
> + polling-delay-passive = <250>;
> + polling-delay = <2000>;
> + thermal-sensors = <&scmi_sensor 0>;
Have a newline between property list and child node.
Shawn
> + trips {
> + cpu_alert0: trip0 {
> + temperature = <85000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit0: trip1 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> + };
> + };
> +
> timer {
> compatible = "arm,armv8-timer";
> interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
> --
> 2.37.1
>
More information about the linux-arm-kernel
mailing list