[PATCH v2 3/7] arm64: dts: imx8mp-phycore-som: Correct pad settings

Teresa Remmet t.remmet at phytec.de
Wed Jul 19 00:13:09 PDT 2023


Do not set reserved bits 0 and 3 in pad configuration.

Signed-off-by: Teresa Remmet <t.remmet at phytec.de>
---
Changes in v2:
- no changes
---
 .../dts/freescale/imx8mp-phycore-som.dtsi     | 26 +++++++++----------
 1 file changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
index 0989104a06e2..7a187098a9ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi
@@ -206,20 +206,20 @@ &wdog1 {
 &iomuxc {
 	pinctrl_fec: fecgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
-			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
-			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
-			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
-			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
-			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
-			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x2
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x2
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x90
 			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x12
 			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x12
 			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x14
 			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x14
 			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x14
 			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x14
-			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x90
 		>;
 	};
 
@@ -236,21 +236,21 @@ MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03	0x82
 
 	pinctrl_i2c1: i2c1grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c3
-			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001c2
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001c2
 		>;
 	};
 
 	pinctrl_i2c1_gpio: i2c1gpiogrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e3
-			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e3
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14	0x1e2
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15	0x1e2
 		>;
 	};
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x141
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x140
 		>;
 	};
 
-- 
2.25.1




More information about the linux-arm-kernel mailing list