[PATCH 4/6] clk: qcom: Add NSS clock Controller driver for IPQ9574

Devi Priya quic_devipriy at quicinc.com
Tue Jul 18 02:13:43 PDT 2023



On 7/11/2023 4:20 PM, Dmitry Baryshkov wrote:
> On 11/07/2023 12:35, Devi Priya wrote:
>> Add Networking Sub System Clock Controller(NSSCC) driver for ipq9574 
>> based
>> devices.
>>
>> Signed-off-by: Devi Priya <quic_devipriy at quicinc.com>
>> ---
>>   drivers/clk/qcom/Kconfig         |    6 +
>>   drivers/clk/qcom/Makefile        |    1 +
>>   drivers/clk/qcom/nsscc-ipq9574.c | 3080 ++++++++++++++++++++++++++++++
>>   3 files changed, 3087 insertions(+)
>>   create mode 100644 drivers/clk/qcom/nsscc-ipq9574.c
>>
>> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
>> index 263e55d75e3f..5556063d204f 100644
>> --- a/drivers/clk/qcom/Kconfig
>> +++ b/drivers/clk/qcom/Kconfig
>> @@ -195,6 +195,12 @@ config IPQ_GCC_9574
>>         i2c, USB, SD/eMMC, etc. Select this for the root clock
>>         of ipq9574.
>> +config IPQ_NSSCC_9574
>> +    tristate "IPQ9574 NSS Clock Controller"
>> +    depends on IPQ_GCC_9574
>> +    help
>> +      Support for NSS clock controller on ipq9574 devices.
>> +
>>   config MSM_GCC_8660
>>       tristate "MSM8660 Global Clock Controller"
>>       depends on ARM || COMPILE_TEST
>> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
>> index e6e294274c35..8ba882186bff 100644
>> --- a/drivers/clk/qcom/Makefile
>> +++ b/drivers/clk/qcom/Makefile
>> @@ -29,6 +29,7 @@ obj-$(CONFIG_IPQ_GCC_6018) += gcc-ipq6018.o
>>   obj-$(CONFIG_IPQ_GCC_806X) += gcc-ipq806x.o
>>   obj-$(CONFIG_IPQ_GCC_8074) += gcc-ipq8074.o
>>   obj-$(CONFIG_IPQ_GCC_9574) += gcc-ipq9574.o
>> +obj-$(CONFIG_IPQ_NSSCC_9574)    += nsscc-ipq9574.o
>>   obj-$(CONFIG_IPQ_LCC_806X) += lcc-ipq806x.o
>>   obj-$(CONFIG_MDM_GCC_9607) += gcc-mdm9607.o
>>   obj-$(CONFIG_MDM_GCC_9615) += gcc-mdm9615.o
>> diff --git a/drivers/clk/qcom/nsscc-ipq9574.c 
>> b/drivers/clk/qcom/nsscc-ipq9574.c
>> new file mode 100644
>> index 000000000000..b6bed0d24059
>> --- /dev/null
>> +++ b/drivers/clk/qcom/nsscc-ipq9574.c
>> @@ -0,0 +1,3080 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2021, The Linux Foundation. All rights reserved.
>> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights 
>> reserved.
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/err.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <dt-bindings/clock/qcom,ipq9574-nsscc.h>
>> +#include <dt-bindings/reset/qcom,ipq9574-nsscc.h>
>> +
>> +#include "clk-alpha-pll.h"
>> +#include "clk-branch.h"
>> +#include "clk-pll.h"
>> +#include "clk-rcg.h"
>> +#include "clk-regmap.h"
>> +#include "clk-regmap-divider.h"
>> +#include "clk-regmap-mux.h"
>> +#include "common.h"
>> +#include "reset.h"
>> +
>> +/* Need to match the order of clocks in DT binding */
>> +enum {
>> +    DT_BIAS_PLL_CC_CLK,
>> +    DT_BIAS_PLL_NSS_NOC_CLK,
>> +    DT_BIAS_PLL_UBI_NC_CLK,
>> +    DT_GCC_GPLL0_OUT_AUX,
>> +    DT_UNIPHY0_GCC_RX_CLK,
>> +    DT_UNIPHY0_GCC_TX_CLK,
>> +    DT_UNIPHY1_GCC_RX_CLK,
>> +    DT_UNIPHY1_GCC_TX_CLK,
>> +    DT_UNIPHY2_GCC_RX_CLK,
>> +    DT_UNIPHY2_GCC_TX_CLK,
>> +    DT_XO,
>> +};
>> +
>> +enum {
>> +    P_BIAS_PLL_CC_CLK,
>> +    P_BIAS_PLL_NSS_NOC_CLK,
>> +    P_BIAS_PLL_UBI_NC_CLK,
>> +    P_GCC_GPLL0_OUT_AUX,
>> +    P_UBI32_PLL_OUT_MAIN,
>> +    P_UNIPHY0_GCC_RX_CLK,
>> +    P_UNIPHY0_GCC_TX_CLK,
>> +    P_UNIPHY1_GCC_RX_CLK,
>> +    P_UNIPHY1_GCC_TX_CLK,
>> +    P_UNIPHY2_GCC_RX_CLK,
>> +    P_UNIPHY2_GCC_TX_CLK,
>> +    P_XO,
>> +};
>> +
>> +static const struct alpha_pll_config ubi32_pll_config = {
>> +    .l = 0x3e,
>> +    .alpha = 0x6666,
>> +    .config_ctl_val = 0x200d4aa8,
>> +    .config_ctl_hi_val = 0x3c,
>> +    .main_output_mask = BIT(0),
>> +    .aux_output_mask = BIT(1),
>> +    .pre_div_val = 0x0,
>> +    .pre_div_mask = BIT(12),
>> +    .post_div_val = 0x0,
>> +    .post_div_mask = GENMASK(9, 8),
>> +    .alpha_en_mask = BIT(24),
>> +    .test_ctl_val = 0x1c0000c0,
>> +    .test_ctl_hi_val = 0x4000,
>> +};
>> +
>> +static struct clk_alpha_pll ubi32_pll_main = {
>> +    .offset = 0x28000,
>> +    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
>> +    .flags = SUPPORTS_DYNAMIC_UPDATE,
>> +    .clkr = {
>> +        .hw.init = &(const struct clk_init_data) {
>> +            .name = "ubi32_pll_main",
>> +            .parent_data = &(const struct clk_parent_data) {
>> +                .index = DT_XO,
>> +            },
>> +            .num_parents = 1,
>> +            .ops = &clk_alpha_pll_huayra_ops,
>> +        },
>> +    },
>> +};
>> +
>> +static struct clk_alpha_pll_postdiv ubi32_pll = {
>> +    .offset = 0x28000,
>> +    .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_NSS_HUAYRA],
>> +    .width = 2,
>> +    .clkr.hw.init = &(const struct clk_init_data) {
>> +        .name = "ubi32_pll",
>> +        .parent_hws = (const struct clk_hw *[]) {
>> +            &ubi32_pll_main.clkr.hw
>> +        },
>> +        .num_parents = 1,
>> +        .ops = &clk_alpha_pll_postdiv_ro_ops,
>> +        .flags = CLK_SET_RATE_PARENT,
>> +    },
>> +};
>> +
> 
> [skipped the rest, LGTM]
> 
>   +
>> +static int nss_cc_ipq9574_probe(struct platform_device *pdev)
>> +{
>> +    struct regmap *regmap;
>> +    struct qcom_cc_desc nsscc_ipq9574_desc = nss_cc_ipq9574_desc;
>> +
>> +    regmap = qcom_cc_map(pdev, &nsscc_ipq9574_desc);
>> +    if (IS_ERR(regmap))
>> +        return PTR_ERR(regmap);
>> +
>> +    /* SW Workaround for UBI Huayra PLL */
>> +    regmap_update_bits(regmap, 0x2800C, BIT(26), BIT(26));
> 
> Can we directly set the correct value via ubi32_pll_config.test_ctl_val ?

Sure, will check and update in V2
> 
>> +
>> +    clk_alpha_pll_configure(&ubi32_pll_main, regmap, &ubi32_pll_config);
>> +
>> +    return qcom_cc_really_probe(pdev, &nsscc_ipq9574_desc, regmap);
>> +}
>> +
>> +static struct platform_driver nss_cc_ipq9574_driver = {
>> +    .probe = nss_cc_ipq9574_probe,
>> +    .driver = {
>> +        .name = "qcom,nsscc-ipq9574",
>> +        .of_match_table = nss_cc_ipq9574_match_table,
>> +    },
>> +};
>> +
>> +static int __init nss_cc_ipq9574_init(void)
>> +{
>> +    return platform_driver_register(&nss_cc_ipq9574_driver);
>> +}
>> +subsys_initcall(nss_cc_ipq9574_init);
>> +
>> +static void __exit nss_cc_ipq9574_exit(void)
>> +{
>> +    platform_driver_unregister(&nss_cc_ipq9574_driver);
>> +}
>> +module_exit(nss_cc_ipq9574_exit);
> 
> module_platform_driver ?
okay

Thanks,
Devi Priya
> 
>> +
>> +MODULE_DESCRIPTION("QTI NSS_CC IPQ9574 Driver");
>> +MODULE_LICENSE("GPL");
> 



More information about the linux-arm-kernel mailing list