[PATCH net-next 2/2] net: stmmac: platform: add support for phy-supply

[Andrew Lunn]

> +static int stmmac_phy_power(struct platform_device *pdev,
> +			    struct plat_stmmacenet_data *plat,
> +			    bool enable)
> +{
> +	struct regulator *regulator = plat->phy_regulator;
> +	int ret = 0;
> +
> +	if (regulator) {
> +		if (enable)
> +			ret = regulator_enable(regulator);
> +		else
> +			regulator_disable(regulator);
> +	}
> +
> +	if (ret)
> +		dev_err(&pdev->dev, "Fail to enable regulator\n");

'enable' is only correct 50% of the time.

> @@ -742,6 +786,8 @@ static int __maybe_unused stmmac_pltfr_suspend(struct device *dev)
>  	if (priv->plat->exit)
>  		priv->plat->exit(pdev, priv->plat->bsp_priv);
>  
> +	stmmac_phy_power_off(pdev, priv->plat);
> +

What about WOL? You probably want to leave the PHY with power in that
case.

> @@ -757,6 +803,11 @@ static int __maybe_unused stmmac_pltfr_resume(struct device *dev)
>  	struct net_device *ndev = dev_get_drvdata(dev);
>  	struct stmmac_priv *priv = netdev_priv(ndev);
>  	struct platform_device *pdev = to_platform_device(dev);
> +	int ret;
> +
> +	ret = stmmac_phy_power_on(pdev, priv->plat);
> +	if (ret)
> +		return ret;

And this needs to balance with _suspend when WOL is being used.

    Andrew