[PATCH v3 3/3] arm64: dts: amlogic: add reset controller for Amlogic C3 SoC

[zelong dong]

From: Zelong Dong <zelong.dong at amlogic.com>

Add the reset controller device of Amlogic C3 SoC family

Signed-off-by: Zelong Dong <zelong.dong at amlogic.com>
---
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index 60ad4f3eef9d..28698c42e11e 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/reset/amlogic,c3-reset.h>
 
 / {
 	cpus {
@@ -72,6 +73,12 @@ apb4: bus at fe000000 {
 			#size-cells = <2>;
 			ranges = <0x0 0x0 0x0 0xfe000000 0x0 0x480000>;
 
+			reset: reset-controller at 2000 {
+				compatible = "amlogic,c3-reset";
+				reg = <0x0 0x2000 0x0 0x98>;
+				#reset-cells = <1>;
+			};
+
 			uart_b: serial at 7a000 {
 				compatible = "amlogic,meson-s4-uart",
 					   "amlogic,meson-ao-uart";
-- 
2.35.1