[EXT] Re: [PATCH v7 3/7] dt-bindings: display: bridge: Add Cadence MHDP850

Sandor Yu sandor.yu at nxp.com
Mon Jul 17 18:58:09 PDT 2023


Hi Alexander,

Thanks for your comments,

>
> Am Montag, 17. Juli 2023, 10:03:49 CEST schrieb Sandor Yu:
> > ********************
> > Achtung externe E-Mail: Öffnen Sie Anhänge und Links nur, wenn Sie
> > wissen, dass diese aus einer sicheren Quelle stammen und sicher sind.
> > Leiten Sie die E-Mail im Zweifelsfall zur Prüfung an den IT-Helpdesk weiter.
> > Attention external email: Open attachments and links only if you know
> > that they are from a secure source and are safe. In doubt forward the
> > email to the IT-Helpdesk to check it. ********************
> >
> > Add bindings for Cadence MHDP8501 DisplayPort/HDMI bridge..
> >
> > Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
> > ---
> >  .../display/bridge/cdns,mhdp8501.yaml         | 105
> ++++++++++++++++++
> >  1 file changed, 105 insertions(+)
> >  create mode 100644
> > Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> >
> > diff --git
> > a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> > b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.yaml
> > new file mode 100644 index 000000000000..b983ee765f54
> > --- /dev/null
> > +++
> b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8501.y
> > +++ aml
> > @@ -0,0 +1,105 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +http://devi/
> >
> +cetree.org%2Fschemas%2Fdisplay%2Fbridge%2Fcdns%2Cmhdp8501.yaml%
> 23&dat
> >
> +a=05%7C01%7CSandor.yu%40nxp.com%7C603a90f3f3c34d32a1e708db86a
> 8f868%7C
> >
> +686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63825183250590544
> 2%7CUnkno
> >
> +wn%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1
> haWwi
> >
> +LCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=JnbufeZplo%2B6JGW4HaK
> %2BLyC0MESK
> > +GsV%2FtjfeXCXqK4U%3D&reserved=0
> > +$schema:
> > +http://devi/
> >
> +cetree.org%2Fmeta-schemas%2Fcore.yaml%23&data=05%7C01%7CSandor.
> yu%40n
> >
> +xp.com%7C603a90f3f3c34d32a1e708db86a8f868%7C686ea1d3bc2b4c6fa9
> 2cd99c5
> >
> +c301635%7C0%7C0%7C638251832505905442%7CUnknown%7CTWFpbGZs
> b3d8eyJWIjoi
> >
> +MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3
> 000%7C%
> >
> +7C%7C&sdata=rdOyjVz4gGnToVC40Rcfp%2Fk925yC%2F6xNwGbBAnOtcDQ
> %3D&reserv
> > +ed=0
> > +
> > +title: Cadence MHDP8501 DP/HDMI bridge
> > +
> > +maintainers:
> > +  - Sandor Yu <Sandor.yu at nxp.com>
> > +
> > +description:
> > +  Cadence MHDP8501 DisplayPort/HDMI interface.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - cdns,mhdp8501
> > +      - fsl,imx8mq-mhdp8501
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +    description: MHDP8501 DP/HDMI APB clock.
> > +
> > +  phys:
> > +    maxItems: 1
> > +    description:
> > +      phandle to the DisplayPort or HDMI PHY
> > +
> > +  interrupts:
> > +    items:
> > +      - description: Hotplug cable plugin.
> > +      - description: Hotplug cable plugout.
> > +
> > +  interrupt-names:
> > +    items:
> > +      - const: plug_in
> > +      - const: plug_out
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Input port from display controller output.
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description:
> > +          Output port to DisplayPort or HDMI connector.
> > +
> > +    required:
> > +      - port at 0
> > +      - port at 1
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - clocks
> > +  - interrupts
> > +  - interrupt-names
> > +  - phys
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/imx8mq-clock.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    mhdp_dp: dp-bridge at 32c00000 {
>
> I'm not sure, but I would name this node just 'bridge', because it can be either
> DP or HDMI depending on the connector. But DT folks will know better than
> me.
This name should update too after DP and HDMI driver combined.
I will change to "mhdp: mhdp-bridge at 32c00000" in the next version.
B.R
Sandor
>
> Best regards,
> Alexander
>
> > +        compatible = "fsl,imx8mq-mhdp8501";
> > +        reg = <0x32c00000 0x100000>;
> > +        interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
> > +                     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > +        interrupt-names = "plug_in", "plug_out";
> > +        clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
> > +        phys = <&dp_phy>;
> > +
> > +        ports {
> > +            #address-cells = <1>;
> > +            #size-cells = <0>;
> > +
> > +            port at 0 {
> > +                reg = <0>;
> > +
> > +                mhdp_in: endpoint {
> > +                    remote-endpoint = <&dcss_out>;
> > +                };
> > +            };
> > +
> > +            port at 1 {
> > +                reg = <1>;
> > +
> > +                mhdp_out: endpoint {
> > +                    remote-endpoint = <&dp_connector>;
> > +                };
> > +            };
> > +        };
> > +    };
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq/
> -group.com%2F&data=05%7C01%7CSandor.yu%40nxp.com%7C603a90f3f3c3
> 4d32a1e708db86a8f868%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C
> 0%7C638251832505905442%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4w
> LjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C
> %7C%7C&sdata=m1JbdOzu8sx6h6fP2Q8OpyLAmvpguKFUj6ddCSB3OCs%3D&
> reserved=0
>




More information about the linux-arm-kernel mailing list