[PATCH 12/18] pwm: lpc18xx-sct: Make use of devm_pwmchip_alloc() function

[Uwe Kleine-König]

This prepares the pwm-lpc18xx-sct driver to further changes of the pwm
core outlined in the commit introducing devm_pwmchip_alloc(). There is
no intended semantical change and the driver should behave as before.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
---
 drivers/pwm/pwm-lpc18xx-sct.c | 24 ++++++++++++------------
 1 file changed, 12 insertions(+), 12 deletions(-)

diff --git a/drivers/pwm/pwm-lpc18xx-sct.c b/drivers/pwm/pwm-lpc18xx-sct.c
index 0bf0893a5d52..13d4eb9d533f 100644
--- a/drivers/pwm/pwm-lpc18xx-sct.c
+++ b/drivers/pwm/pwm-lpc18xx-sct.c
@@ -92,7 +92,6 @@ struct lpc18xx_pwm_data {
 
 struct lpc18xx_pwm_chip {
 	struct device *dev;
-	struct pwm_chip chip;
 	void __iomem *base;
 	struct clk *pwm_clk;
 	unsigned long clk_rate;
@@ -109,7 +108,7 @@ struct lpc18xx_pwm_chip {
 static inline struct lpc18xx_pwm_chip *
 to_lpc18xx_pwm_chip(struct pwm_chip *chip)
 {
-	return container_of(chip, struct lpc18xx_pwm_chip, chip);
+	return pwmchip_priv(chip);
 }
 
 static inline void lpc18xx_pwm_writel(struct lpc18xx_pwm_chip *lpc18xx_pwm,
@@ -351,14 +350,15 @@ MODULE_DEVICE_TABLE(of, lpc18xx_pwm_of_match);
 
 static int lpc18xx_pwm_probe(struct platform_device *pdev)
 {
+	struct pwm_chip *chip;
 	struct lpc18xx_pwm_chip *lpc18xx_pwm;
 	int ret;
 	u64 val;
 
-	lpc18xx_pwm = devm_kzalloc(&pdev->dev, sizeof(*lpc18xx_pwm),
-				   GFP_KERNEL);
-	if (!lpc18xx_pwm)
+	chip = devm_pwmchip_alloc(&pdev->dev, sizeof(*lpc18xx_pwm));
+	if (!chip)
 		return -ENOMEM;
+	lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
 
 	lpc18xx_pwm->dev = &pdev->dev;
 
@@ -391,9 +391,8 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	lpc18xx_pwm->min_period_ns = DIV_ROUND_UP(NSEC_PER_SEC,
 						  lpc18xx_pwm->clk_rate);
 
-	lpc18xx_pwm->chip.dev = &pdev->dev;
-	lpc18xx_pwm->chip.ops = &lpc18xx_pwm_ops;
-	lpc18xx_pwm->chip.npwm = LPC18XX_NUM_PWMS;
+	chip->ops = &lpc18xx_pwm_ops;
+	chip->npwm = LPC18XX_NUM_PWMS;
 
 	/* SCT counter must be in unify (32 bit) mode */
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CONFIG,
@@ -425,21 +424,22 @@ static int lpc18xx_pwm_probe(struct platform_device *pdev)
 	val |= LPC18XX_PWM_PRE(0);
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL, val);
 
-	ret = pwmchip_add(&lpc18xx_pwm->chip);
+	ret = pwmchip_add(chip);
 	if (ret < 0)
 		return dev_err_probe(&pdev->dev, ret, "pwmchip_add failed\n");
 
-	platform_set_drvdata(pdev, lpc18xx_pwm);
+	platform_set_drvdata(pdev, chip);
 
 	return 0;
 }
 
 static void lpc18xx_pwm_remove(struct platform_device *pdev)
 {
-	struct lpc18xx_pwm_chip *lpc18xx_pwm = platform_get_drvdata(pdev);
+	struct pwm_chip *chip = platform_get_drvdata(pdev);
+	struct lpc18xx_pwm_chip *lpc18xx_pwm = to_lpc18xx_pwm_chip(chip);
 	u32 val;
 
-	pwmchip_remove(&lpc18xx_pwm->chip);
+	pwmchip_remove(chip);
 
 	val = lpc18xx_pwm_readl(lpc18xx_pwm, LPC18XX_PWM_CTRL);
 	lpc18xx_pwm_writel(lpc18xx_pwm, LPC18XX_PWM_CTRL,
-- 
2.39.2