[PATCH 2/2] remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO

Mathieu Poirier mathieu.poirier at linaro.org
Mon Jul 17 10:10:02 PDT 2023


Good morning,

On Sat, Jul 08, 2023 at 01:26:26AM +0200, Marek Vasut wrote:
> The MX8M CM7 boot via SMC call is problematic, since not all versions
> of ATF support this interface. Extend the MMIO support so it can boot
> the CM7 on MX8MN/MP instead and discern the two alternatives using DT
> compatible strings.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Bjorn Andersson <andersson at kernel.org>
> Cc: Conor Dooley <conor+dt at kernel.org>
> Cc: Fabio Estevam <festevam at gmail.com>
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Mathieu Poirier <mathieu.poirier at linaro.org>
> Cc: NXP Linux Team <linux-imx at nxp.com>
> Cc: Peng Fan <peng.fan at nxp.com>
> Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Sascha Hauer <s.hauer at pengutronix.de>
> Cc: Shawn Guo <shawnguo at kernel.org>
> Cc: devicetree at vger.kernel.org
> Cc: linux-arm-kernel at lists.infradead.org
> Cc: linux-remoteproc at vger.kernel.org
> ---
>  drivers/remoteproc/imx_rproc.c | 53 ++++++++++++++++++++++++++++++++--
>  drivers/remoteproc/imx_rproc.h |  2 ++
>  2 files changed, 53 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index d0eb96d6a4fe1..09589f664a2be 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -41,6 +41,12 @@
>  #define IMX7D_M4_STOP			(IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST | \
>  					 IMX7D_SW_M4C_NON_SCLR_RST)
>  
> +#define IMX8M_M7_STOP			(IMX7D_ENABLE_M4 | IMX7D_SW_M4C_RST)
> +#define IMX8M_M7_POLL			IMX7D_ENABLE_M4
> +
> +#define IMX8M_GPR22			0x58
> +#define IMX8M_GPR22_CM7_CPUWAIT		BIT(0)
> +
>  /* Address: 0x020D8000 */
>  #define IMX6SX_SRC_SCR			0x00
>  #define IMX6SX_ENABLE_M4		BIT(22)
> @@ -92,6 +98,7 @@ static int imx_rproc_detach_pd(struct rproc *rproc);
>  struct imx_rproc {
>  	struct device			*dev;
>  	struct regmap			*regmap;
> +	struct regmap			*gpr;
>  	struct rproc			*rproc;
>  	const struct imx_rproc_dcfg	*dcfg;
>  	struct imx_rproc_mem		mem[IMX_RPROC_MEM_MAX];
> @@ -287,6 +294,18 @@ static const struct imx_rproc_att imx_rproc_att_imx6sx[] = {
>  	{ 0x80000000, 0x80000000, 0x60000000, 0 },
>  };
>  
> +static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn_mmio = {
> +	.src_reg	= IMX7D_SRC_SCR,
> +	.src_mask	= IMX7D_M4_RST_MASK,
> +	.src_start	= IMX7D_M4_START,
> +	.src_stop	= IMX8M_M7_STOP,
> +	.gpr_reg	= IMX8M_GPR22,
> +	.gpr_wait	= IMX8M_GPR22_CM7_CPUWAIT,
> +	.att		= imx_rproc_att_imx8mn,
> +	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mn),
> +	.method		= IMX_RPROC_MMIO,
> +};
> +
>  static const struct imx_rproc_dcfg imx_rproc_cfg_imx8mn = {
>  	.att		= imx_rproc_att_imx8mn,
>  	.att_size	= ARRAY_SIZE(imx_rproc_att_imx8mn),
> @@ -367,8 +386,14 @@ static int imx_rproc_start(struct rproc *rproc)
>  
>  	switch (dcfg->method) {
>  	case IMX_RPROC_MMIO:
> -		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
> -					 dcfg->src_start);
> +		if (priv->gpr) {
> +			ret = regmap_clear_bits(priv->gpr, dcfg->gpr_reg,
> +						dcfg->gpr_wait);
> +		} else {
> +			ret = regmap_update_bits(priv->regmap, dcfg->src_reg,
> +						 dcfg->src_mask,
> +						 dcfg->src_start);
> +		}
>  		break;
>  	case IMX_RPROC_SMC:
>  		arm_smccc_smc(IMX_SIP_RPROC, IMX_SIP_RPROC_START, 0, 0, 0, 0, 0, 0, &res);
> @@ -400,6 +425,16 @@ static int imx_rproc_stop(struct rproc *rproc)
>  
>  	switch (dcfg->method) {
>  	case IMX_RPROC_MMIO:
> +		if (priv->gpr) {
> +			ret = regmap_set_bits(priv->gpr, dcfg->gpr_reg,
> +					      dcfg->gpr_wait);
> +			if (ret) {
> +				dev_err(priv->dev,
> +					"Failed to quiescence M4 platform!\n");
> +				return ret;
> +			}
> +		}
> +
>  		ret = regmap_update_bits(priv->regmap, dcfg->src_reg, dcfg->src_mask,
>  					 dcfg->src_stop);
>  		break;
> @@ -988,6 +1023,10 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
>  		break;
>  	}
>  
> +	priv->gpr = syscon_regmap_lookup_by_phandle(dev->of_node, "gpr");
> +	if (IS_ERR(priv->gpr))
> +		priv->gpr = NULL;
> +
>  	regmap = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
>  	if (IS_ERR(regmap)) {
>  		dev_err(dev, "failed to find syscon\n");
> @@ -997,6 +1036,14 @@ static int imx_rproc_detect_mode(struct imx_rproc *priv)
>  	priv->regmap = regmap;
>  	regmap_attach_dev(dev, regmap, &config);
>  
> +	if (priv->gpr) {
> +		ret = regmap_read(priv->gpr, dcfg->gpr_reg, &val);
> +		if (val & dcfg->gpr_wait) {
> +			imx_rproc_stop(priv->rproc);
> +			return 0;
> +		}
> +	}

Can you provide a comment to explain what is happening above?  In what kind of
scenario would a GPR be set with the wait bit on startup?

Thanks,
Mathieu

> +
>  	ret = regmap_read(regmap, dcfg->src_reg, &val);
>  	if (ret) {
>  		dev_err(dev, "Failed to read src\n");
> @@ -1142,6 +1189,8 @@ static const struct of_device_id imx_rproc_of_match[] = {
>  	{ .compatible = "fsl,imx8mm-cm4", .data = &imx_rproc_cfg_imx8mq },
>  	{ .compatible = "fsl,imx8mn-cm7", .data = &imx_rproc_cfg_imx8mn },
>  	{ .compatible = "fsl,imx8mp-cm7", .data = &imx_rproc_cfg_imx8mn },
> +	{ .compatible = "fsl,imx8mn-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
> +	{ .compatible = "fsl,imx8mp-cm7-mmio", .data = &imx_rproc_cfg_imx8mn_mmio },
>  	{ .compatible = "fsl,imx8qxp-cm4", .data = &imx_rproc_cfg_imx8qxp },
>  	{ .compatible = "fsl,imx8qm-cm4", .data = &imx_rproc_cfg_imx8qm },
>  	{ .compatible = "fsl,imx8ulp-cm33", .data = &imx_rproc_cfg_imx8ulp },
> diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
> index 1c7e2127c7584..79a1b8956d142 100644
> --- a/drivers/remoteproc/imx_rproc.h
> +++ b/drivers/remoteproc/imx_rproc.h
> @@ -31,6 +31,8 @@ struct imx_rproc_dcfg {
>  	u32				src_mask;
>  	u32				src_start;
>  	u32				src_stop;
> +	u32				gpr_reg;
> +	u32				gpr_wait;
>  	const struct imx_rproc_att	*att;
>  	size_t				att_size;
>  	enum imx_rproc_method		method;
> -- 
> 2.40.1
> 



More information about the linux-arm-kernel mailing list