[PATCH v2 resend] ARM: dts: aspeed: Fix pca954x i2c-mux node names
Geert Uytterhoeven
geert+renesas at glider.be
Mon Jul 17 06:30:55 PDT 2023
"make dtbs_check":
arch/arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch at 70: $nodename:0: 'i2c-switch at 70' does not match '^(i2c-?)?mux'
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
arm/boot/dts/aspeed-bmc-bytedance-g220a.dtb: i2c-switch at 70: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'i2c at 0', 'i2c at 1', 'i2c at 2', 'i2c at 3' were unexpected)
From schema: Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
...
Fix this by renaming PCA954x nodes to "i2c-mux", to match the I2C bus
multiplexer/switch DT bindings and the Generic Names Recommendation in
the Devicetree Specification.
Signed-off-by: Geert Uytterhoeven <geert+renesas at glider.be>
Reviewed-by: Philippe Mathieu-Daudé <philmd at linaro.org>
---
v2:
- Add Reviewed-by.
---
.../dts/aspeed/aspeed-bmc-bytedance-g220a.dts | 18 ++++----
.../aspeed-bmc-facebook-cloudripper.dts | 10 ++--
.../dts/aspeed/aspeed-bmc-facebook-cmm.dts | 46 +++++++++----------
.../dts/aspeed/aspeed-bmc-facebook-elbert.dts | 4 +-
.../dts/aspeed/aspeed-bmc-facebook-fuji.dts | 30 ++++++------
.../aspeed/aspeed-bmc-facebook-minipack.dts | 32 ++++++-------
.../aspeed/aspeed-bmc-facebook-tiogapass.dts | 8 ++--
.../aspeed/aspeed-bmc-facebook-wedge100.dts | 2 +-
.../aspeed/aspeed-bmc-facebook-wedge400.dts | 6 +--
.../dts/aspeed/aspeed-bmc-facebook-yamp.dts | 2 +-
.../dts/aspeed/aspeed-bmc-ibm-everest.dts | 18 ++++----
.../dts/aspeed/aspeed-bmc-ibm-rainier.dts | 8 ++--
.../dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts | 4 +-
.../dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts | 12 ++---
.../aspeed-bmc-inventec-transformers.dts | 6 +--
.../dts/aspeed/aspeed-bmc-lenovo-hr630.dts | 4 +-
.../dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts | 4 +-
.../boot/dts/aspeed/aspeed-bmc-opp-zaius.dts | 4 +-
.../dts/aspeed/aspeed-bmc-quanta-q71l.dts | 6 +--
.../boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts | 10 ++--
.../dts/aspeed/aspeed-bmc-vegman-n110.dts | 14 +++---
.../dts/aspeed/aspeed-bmc-vegman-rx20.dts | 10 ++--
.../dts/aspeed/aspeed-bmc-vegman-sx20.dts | 14 +++---
23 files changed, 136 insertions(+), 136 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
index f75cad41ae6f644b..3f03a198a1a8fcd4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-bytedance-g220a.dts
@@ -424,7 +424,7 @@ &i2c2 {
&i2c3 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -471,7 +471,7 @@ &i2c5 {
&i2c6 {
status = "okay";
- i2c-switch at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9548";
reg = <0x72>;
#address-cells = <1>;
@@ -524,7 +524,7 @@ channel_6_7: i2c at 7 {
};
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -533,7 +533,7 @@ channel_6_8: i2c at 0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -569,7 +569,7 @@ channel_6_9: i2c at 1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -605,7 +605,7 @@ channel_6_10: i2c at 2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -640,7 +640,7 @@ channel_6_11: i2c at 3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -808,7 +808,7 @@ &i2c9 {
&i2c10 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -838,7 +838,7 @@ channel_10_3: i2c at 3 {
};
};
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts
index 5cd060029ea97914..d49328fa487a013e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cloudripper.dts
@@ -132,7 +132,7 @@ &i2c1 {
* PCA9548 (1-0070) provides 8 channels connecting to SMB (Switch
* Main Board).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -194,7 +194,7 @@ &i2c2 {
* PCA9548 (2-0070) provides 8 channels connecting to SCM (System
* Controller Module).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -256,7 +256,7 @@ &i2c3 {
* PCA9548 (3-0070) provides 8 channels connecting to SMB (Switch
* Main Board).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -423,7 +423,7 @@ &i2c8 {
* PCA9548 (8-0070) provides 8 channels connecting to PDB (Power
* Delivery Board).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -486,7 +486,7 @@ &i2c15 {
* PCA9548 (15-0076) provides 8 channels connecting to FCM (Fan
* Controller Module).
*/
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
index 90a3f485c67a9895..24153868cc004023 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-cmm.dts
@@ -328,7 +328,7 @@ &i2c0 {
&i2c1 {
status = "okay";
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -341,7 +341,7 @@ imux16: i2c at 0 {
#size-cells = <0>;
reg = <0>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -390,7 +390,7 @@ imux111: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -446,7 +446,7 @@ imux17: i2c at 1 {
#size-cells = <0>;
reg = <1>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -495,7 +495,7 @@ imux127: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -551,7 +551,7 @@ imux18: i2c at 2 {
#size-cells = <0>;
reg = <2>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -600,7 +600,7 @@ imux47: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -656,7 +656,7 @@ imux19: i2c at 3 {
#size-cells = <0>;
reg = <3>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -705,7 +705,7 @@ imux63: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -761,7 +761,7 @@ imux20: i2c at 4 {
#size-cells = <0>;
reg = <4>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -810,7 +810,7 @@ imux79: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -866,7 +866,7 @@ imux21: i2c at 5 {
#size-cells = <0>;
reg = <5>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -915,7 +915,7 @@ imux95: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -971,7 +971,7 @@ imux22: i2c at 6 {
#size-cells = <0>;
reg = <6>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1020,7 +1020,7 @@ imux143: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1076,7 +1076,7 @@ imux23: i2c at 7 {
#size-cells = <0>;
reg = <7>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1125,7 +1125,7 @@ imux159: i2c at 7 {
};
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1183,7 +1183,7 @@ imux167: i2c at 7 {
&i2c2 {
status = "okay";
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1281,7 +1281,7 @@ &i2c7 {
&i2c8 {
status = "okay";
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1294,7 +1294,7 @@ imux32: i2c at 0 {
#size-cells = <0>;
reg = <0>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1350,7 +1350,7 @@ imux33: i2c at 1 {
#size-cells = <0>;
reg = <1>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1406,7 +1406,7 @@ imux34: i2c at 2 {
#size-cells = <0>;
reg = <2>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1462,7 +1462,7 @@ imux35: i2c at 3 {
#size-cells = <0>;
reg = <3>;
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index b5cd4c7800b05928..74f3c67e0effae9d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -65,7 +65,7 @@ &kcs3 {
};
&i2c2 {
- i2c-switch at 75 {
+ i2c-mux at 75 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -123,7 +123,7 @@ imux23: i2c at 7 {
};
&i2c5 {
- i2c-switch at 75 {
+ i2c-mux at 75 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index 6b319f34a9b98c7f..f23c26a3441d13ab 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -233,7 +233,7 @@ &i2c2 {
* PCA9548 (2-0070) provides 8 channels connecting to SCM (System
* Controller Module).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -303,7 +303,7 @@ &i2c8 {
* PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
* Main Board).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -315,7 +315,7 @@ imux24: i2c at 0 {
#size-cells = <0>;
reg = <0>;
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -481,7 +481,7 @@ imux25: i2c at 1 {
#size-cells = <0>;
reg = <1>;
- i2c-switch at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -544,7 +544,7 @@ imux26: i2c at 2 {
#size-cells = <0>;
reg = <2>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -615,7 +615,7 @@ imux27: i2c at 3 {
#size-cells = <0>;
reg = <3>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -715,7 +715,7 @@ &i2c11 {
* PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
* Main Board).
*/
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -727,7 +727,7 @@ imux40: i2c at 0 {
#size-cells = <0>;
reg = <0>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -790,7 +790,7 @@ imux41: i2c at 1 {
#size-cells = <0>;
reg = <1>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -853,7 +853,7 @@ imux42: i2c at 2 {
#size-cells = <0>;
reg = <2>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -916,7 +916,7 @@ imux43: i2c at 3 {
#size-cells = <0>;
reg = <3>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -979,7 +979,7 @@ imux44: i2c at 4 {
#size-cells = <0>;
reg = <4>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1042,7 +1042,7 @@ imux45: i2c at 5 {
#size-cells = <0>;
reg = <5>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1105,7 +1105,7 @@ imux46: i2c at 6 {
#size-cells = <0>;
reg = <6>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1168,7 +1168,7 @@ imux47: i2c at 7 {
#size-cells = <0>;
reg = <7>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
index 230d16cd99672796..aafd1042b6e53066 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minipack.dts
@@ -344,7 +344,7 @@ &i2c2 {
* I2C Switch 2-0070 is connecting to SCM (System Controller
* Module).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -425,7 +425,7 @@ &i2c7 {
&i2c8 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -441,7 +441,7 @@ imux24: i2c at 0 {
#size-cells = <0>;
reg = <0>;
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -507,7 +507,7 @@ imux25: i2c at 1 {
#size-cells = <0>;
reg = <1>;
- i2c-switch at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -573,7 +573,7 @@ imux26: i2c at 2 {
#size-cells = <0>;
reg = <2>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -639,7 +639,7 @@ imux27: i2c at 3 {
#size-cells = <0>;
reg = <3>;
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -729,7 +729,7 @@ &i2c9 {
* I2C Switch 9-0070 is connecting to MAC/PHY EEPROMs on SMB
* (Switch Main Board).
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -793,7 +793,7 @@ &i2c10 {
&i2c11 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -809,7 +809,7 @@ imux40: i2c at 0 {
#size-cells = <0>;
reg = <0>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -875,7 +875,7 @@ imux41: i2c at 1 {
#size-cells = <0>;
reg = <1>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -941,7 +941,7 @@ imux42: i2c at 2 {
#size-cells = <0>;
reg = <2>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1007,7 +1007,7 @@ imux43: i2c at 3 {
#size-cells = <0>;
reg = <3>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1073,7 +1073,7 @@ imux44: i2c at 4 {
#size-cells = <0>;
reg = <4>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1139,7 +1139,7 @@ imux45: i2c at 5 {
#size-cells = <0>;
reg = <5>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1205,7 +1205,7 @@ imux46: i2c at 6 {
#size-cells = <0>;
reg = <6>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -1271,7 +1271,7 @@ imux47: i2c at 7 {
#size-cells = <0>;
reg = <7>;
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
index b6b16356f571a2e9..704ee684e0fb408b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -211,7 +211,7 @@ &i2c0 {
&i2c1 {
status = "okay";
//X24 Riser
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
@@ -243,7 +243,7 @@ eeprom at 50 {
pagesize = <32>;
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
@@ -303,7 +303,7 @@ eeprom at 50 {
pagesize = <32>;
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
@@ -363,7 +363,7 @@ eeprom at 50 {
pagesize = <32>;
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
index 584efa5284500763..97cd11c3d9a52458 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge100.dts
@@ -44,7 +44,7 @@ flash1 at 0 {
};
&i2c7 {
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index ed305948386f220d..d1a1e8cf2028fd07 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -138,7 +138,7 @@ &i2c1 {
&i2c2 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -218,7 +218,7 @@ &i2c7 {
&i2c8 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -287,7 +287,7 @@ &i2c10 {
&i2c11 {
status = "okay";
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
index 5e6105874217100e..98fe0d6c8188cd6e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yamp.dts
@@ -57,7 +57,7 @@ &i2c1 {
&i2c2 {
status = "okay";
- i2c-switch at 75 {
+ i2c-mux at 75 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index c6f8f20914d19261..9d0727c8d32d3313 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -399,7 +399,7 @@ pca2: pca9552 at 65 {
"expander-cable-card5";
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -544,7 +544,7 @@ pca3: pca9552 at 66 {
"expander-cable-card11";
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -701,7 +701,7 @@ led at 1 {
&i2c6 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -1792,7 +1792,7 @@ eeprom at 50 {
reg = <0x50>;
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -1929,7 +1929,7 @@ ibm-panel at 62 {
reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -2188,7 +2188,7 @@ pca0: pca9552 at 61 {
};
};
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -2241,7 +2241,7 @@ eeprom at 50 {
&i2c15 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -2293,7 +2293,7 @@ eeprom at 53 {
};
};
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -2345,7 +2345,7 @@ eeprom at 53 {
};
};
- i2c-switch at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9546";
reg = <0x72>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index 7162e65b811566cd..0213eb7f6d835035 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -1017,7 +1017,7 @@ tmp275 at 4a {
reg = <0x4a>;
};
- pca9546 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -1099,7 +1099,7 @@ tmp275 at 49 {
reg = <0x49>;
};
- pca9546 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -1201,7 +1201,7 @@ tmp275 at 4b {
reg = <0x4b>;
};
- pca9546 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -2031,7 +2031,7 @@ tmp275 at 49 {
reg = <0x49>;
};
- pca9546 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index 208b0f094ed95f4e..0dea014e4f30f3ac 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -348,7 +348,7 @@ tmp112 at 49 {
label = "outlet";
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -432,7 +432,7 @@ &i2c6 {
&i2c7 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
index b3c1e3ba583185e8..92b9b3987c92daa4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-nf5280m6.dts
@@ -215,7 +215,7 @@ tmp112 at 49 {
label = "outlet";
};
- pca9548 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
reg = <0x70>;
};
@@ -224,17 +224,17 @@ pca9548 at 70 {
&i2c3 {
status = "okay";
- pca9548 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
reg = <0x70>;
};
- pca9548 at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9548";
reg = <0x71>;
};
- pca9548 at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9548";
reg = <0x72>;
};
@@ -248,7 +248,7 @@ &i2c4 {
&i2c5 {
status = "okay";
- pca9548 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
reg = <0x70>;
};
@@ -257,7 +257,7 @@ pca9548 at 70 {
&i2c6 {
status = "okay";
- pca9548 at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
reg = <0x70>;
};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
index caf66651e5b5db9f..c713cb7a6187012a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inventec-transformers.dts
@@ -193,14 +193,14 @@ &i2c10 {
// I2C EXPANDER
status = "okay";
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x71>;
};
- i2c-switch at 73 {
+ i2c-mux at 73 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
@@ -212,7 +212,7 @@ &i2c11 {
// I2C EXPANDER
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
index 8f543cca7c21f154..ddbcbc64e2356bc8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr630.dts
@@ -208,7 +208,7 @@ &i2c6 {
* Slot 3
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9545";
reg = <0x70>;
#address-cells = <1>;
@@ -249,7 +249,7 @@ &i2c7 {
* Slot 2,
* Slot 3
*/
- i2c-switch at 76 {
+ i2c-mux at 76 {
compatible = "nxp,pca9546";
reg = <0x76>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index bcc1820f5c073374..6045b60b80da8de7 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -175,7 +175,7 @@ &pinctrl_adc14_default
&i2c0 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9545";
reg = <0x70>;
#address-cells = <1>;
@@ -227,7 +227,7 @@ &i2c2 {
&i2c3 {
status = "okay";
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 0cb7b20ff3ab88d7..3d2d8db73ca6601a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -231,7 +231,7 @@ ucd90160 at 64 {
&i2c1 {
status = "okay";
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
@@ -282,7 +282,7 @@ &i2c3 {
&i2c4 {
status = "okay";
- i2c-switch at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9546";
reg = <0x71>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
index 9605e53f5bbfc0c1..fed2791f59941841 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-q71l.dts
@@ -197,7 +197,7 @@ &i2c2 {
* Slot 6,
* Slot 7
*/
- i2c-switch at 74 {
+ i2c-mux at 74 {
compatible = "nxp,pca9546";
reg = <0x74>;
#address-cells = <1>;
@@ -238,7 +238,7 @@ i2c_pcie7: i2c at 3 {
* SSD 1,
* SSD 2
*/
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -325,7 +325,7 @@ &i2c7 {
* PSU3
* PSU2
*/
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index 46cbba6305b8f324..983853eedaefe82c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -285,7 +285,7 @@ U35_PWR_ADC at 4b {
reg = <0x4b>;
};
- i2c-switch at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9546";
reg = <0x70>;
#address-cells = <1>;
@@ -321,7 +321,7 @@ SMB_HOST_DB800_C_SCL: i2c at 3 {
&i2c1 {
status = "okay";
- i2c-switch at 59 {
+ i2c-mux at 59 {
compatible = "nxp,pca9848";
reg = <0x59>;
#address-cells = <1>;
@@ -393,7 +393,7 @@ SMB_FB_SCL: i2c at 7 {
#size-cells = <0>;
reg = <7>;
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9546";
reg = <0x77>;
#address-cells = <1>;
@@ -490,7 +490,7 @@ &i2c5 {
&i2c6 {
status = "okay";
- i2c-switch at 77 {
+ i2c-mux at 77 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
@@ -556,7 +556,7 @@ U197_PCA9546_CH3: i2c at 3 {
&i2c7 {
status = "okay";
- i2c-switch at 75 {
+ i2c-mux at 75 {
compatible = "nxp,pca9546";
#address-cells = <1>;
#size-cells = <0>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
index 24319267d5508e3e..44b9853f6e632403 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-n110.dts
@@ -88,16 +88,16 @@ gpio at 27 {
&i2c13 {
/* SMB_PCIE2_STBY_LVC3 */
- mux-expa at 73 {
- compatible = "nxp,pca9545";
- reg = <0x73>;
+ i2c-mux at 71 {
+ compatible = "nxp,pca9543";
+ reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
};
- mux-sata at 71 {
- compatible = "nxp,pca9543";
- reg = <0x71>;
+ i2c-mux at 73 {
+ compatible = "nxp,pca9545";
+ reg = <0x73>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
@@ -106,7 +106,7 @@ mux-sata at 71 {
&i2c2 {
/* SMB_PCIE_STBY_LVC3 */
- mux-expb at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9545";
reg = <0x71>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
index ebbb68b55559a704..b8f0b08018a3472c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-rx20.dts
@@ -133,7 +133,7 @@ gpio at 39 {
&i2c13 {
/* SMB_PCIE2_STBY_LVC3 */
- mux-expa at 70 {
+ i2c-mux at 70 {
compatible = "nxp,pca9548";
reg = <0x70>;
#address-cells = <1>;
@@ -144,7 +144,7 @@ i2c at 2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
- rsra-mux at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9548";
reg = <0x72>;
#address-cells = <1>;
@@ -165,7 +165,7 @@ at24 at 50 {
};
};
};
- mux-sata at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9543";
reg = <0x71>;
#address-cells = <1>;
@@ -176,7 +176,7 @@ mux-sata at 71 {
&i2c2 {
/* SMB_PCIE_STBY_LVC3 */
- mux-expb at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9548";
reg = <0x71>;
#address-cells = <1>;
@@ -187,7 +187,7 @@ i2c at 0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
- rsrb-mux at 72 {
+ i2c-mux at 72 {
compatible = "nxp,pca9548";
reg = <0x72>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
index e36ee4704994b1f7..933ca831d37529d8 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman-sx20.dts
@@ -88,16 +88,16 @@ gpio at 27 {
&i2c13 {
/* SMB_PCIE2_STBY_LVC3 */
- mux-expa at 73 {
- compatible = "nxp,pca9545";
- reg = <0x73>;
+ i2c-mux at 71 {
+ compatible = "nxp,pca9543";
+ reg = <0x71>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
};
- mux-sata at 71 {
- compatible = "nxp,pca9543";
- reg = <0x71>;
+ i2c-mux at 73 {
+ compatible = "nxp,pca9545";
+ reg = <0x73>;
#address-cells = <1>;
#size-cells = <0>;
i2c-mux-idle-disconnect;
@@ -106,7 +106,7 @@ mux-sata at 71 {
&i2c2 {
/* SMB_PCIE_STBY_LVC3 */
- mux-expb at 71 {
+ i2c-mux at 71 {
compatible = "nxp,pca9545";
reg = <0x71>;
#address-cells = <1>;
--
2.34.1
More information about the linux-arm-kernel
mailing list