[EXT] Re: [PATCH v1 2/3] regulator: pca9450: add pca9451a support

Joy Zou joy.zou at nxp.com
Mon Jul 17 02:53:15 PDT 2023


> -----Original Message-----
> From: Alexander Stein <alexander.stein at ew.tq-group.com>
> Sent: 2023年7月5日 21:13
> To: Jacky Bai <ping.bai at nxp.com>; lgirdwood at gmail.com;
> broonie at kernel.org; robh+dt at kernel.org; krzysztof.kozlowski+dt at linaro.org;
> conor+dt at kernel.org; shawnguo at kernel.org; s.hauer at pengutronix.de;
> linux-arm-kernel at lists.infradead.org; Joy Zou <joy.zou at nxp.com>
> Cc: kernel at pengutronix.de; festevam at gmail.com; dl-linux-imx
> <linux-imx at nxp.com>; devicetree at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
> Subject: [EXT] Re: [PATCH v1 2/3] regulator: pca9450: add pca9451a support
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> Hello,
>
> Am Mittwoch, 5. Juli 2023, 08:50:24 CEST schrieb Joy Zou:
> >
> > > -----Original Message-----
> > > From: Alexander Stein <alexander.stein at ew.tq-group.com>
> > > Sent: 2023年5月31日 19:35
> > > To: Jacky Bai <ping.bai at nxp.com>; lgirdwood at gmail.com;
> > > broonie at kernel.org; robh+dt at kernel.org;
> > > krzysztof.kozlowski+dt at linaro.org;
> > > conor+dt at kernel.org; shawnguo at kernel.org; s.hauer at pengutronix.de;
> > > linux-arm-kernel at lists.infradead.org
> > > Cc: kernel at pengutronix.de; festevam at gmail.com; dl-linux-imx
> > > <linux-imx at nxp.com>; devicetree at vger.kernel.org;
> > > linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org;
> > > Joy Zou
>  <joy.zou at nxp.com>
> > > Subject: [EXT] Re: [PATCH v1 2/3] regulator: pca9450: add pca9451a
> > > support
> > >
> > >
> > >
> > > Caution: This is an external email. Please take care when clicking
> > > links or
>  opening attachments. When in doubt, report the message using the
> > > 'Report this email' button
> > >
> > >
> > >
> > >
> > > Hi,
> > >
> > >
> > >
> > > Am Mittwoch, 31. Mai 2023, 08:57:23 CEST schrieb Joy Zou:
> > >
> > > > Adding support for pmic pca9451a.
> > > >
> > > >
> > > >
> > > > This patch support old and new pmic pca9451a. The new pmic trimed
> > >
> > > BUCK1.
> > >
> > > > The default value of Toff_Deb is used to distinguish the old and
> > > > new pmic.
> > > >
> > > >
> > > >
> > > > Signed-off-by: Joy Zou <joy.zou at nxp.com>
> > > > ---
> > > >
> > > >  drivers/regulator/pca9450-regulator.c | 262
> > >
> > > ++++++++++++++++++++++++--
> > >
> > > >  include/linux/regulator/pca9450.h     |   2 +
> > > >  2 files changed, 252 insertions(+), 12 deletions(-)
> > > >
> > > >
> > > >
> > > > diff --git a/drivers/regulator/pca9450-regulator.c
> > > > b/drivers/regulator/pca9450-regulator.c index
> > > > 91bfb7e026c9..654aa4fbe494
> > > > 100644
> > > > --- a/drivers/regulator/pca9450-regulator.c
> > > > +++ b/drivers/regulator/pca9450-regulator.c
> > > > @@ -104,7 +104,15 @@ static const struct regulator_ops
> > > > pca9450_ldo_regulator_ops = { * 0.60 to 2.1875V (12.5mV step)
> > > >
> > > >   */
> > > >
> > > >  static const struct linear_range pca9450_dvs_buck_volts[] = {
> > > >
> > > > -     REGULATOR_LINEAR_RANGE(600000,  0x00, 0x7F, 12500),
> > > > +     REGULATOR_LINEAR_RANGE(600000, 0x00, 0x7F, 12500), };
> > > > +
> > > > +/*
> > > > + * BUCK1/3
> > > > + * 0.65 to 2.2375V (12.5mV step)
> > >
> > >
> > >
> > > Reading this comment, it seems the same distinction needs to be done
> > > for
> > > BUCK3 as well, no?
> >
> > Sorry for the late reply!
> > The BUCK1 and BUCK3 are dual phase, so don't need to be done for BUCK3.
> >
> > >
> > >
> > > > + */
> > > > +static const struct linear_range pca9450_trim_dvs_buck_volts[] = {
> > > > +     REGULATOR_LINEAR_RANGE(650000, 0x00, 0x7F, 12500),
> > > >
> > > >  };
> > > >
> > > >
> > > >
> > > >  /*
> > > >
> > > > @@ -663,6 +671,207 @@ static const struct pca9450_regulator_desc
> > > > pca9450bc_regulators[] = { },  };
> > > >
> > > >
> > > >
> > > > +static const struct pca9450_regulator_desc pca9451a_regulators[] = {
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "buck1",
> > > > +                     .of_match = of_match_ptr("BUCK1"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_BUCK1,
> > > > +                     .ops = &pca9450_dvs_buck_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_dvs_buck_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_dvs_buck_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
> > > > +                     .vsel_mask = BUCK1OUT_DVS0_MASK,
> > > > +                     .enable_reg = PCA9450_REG_BUCK1CTRL,
> > > > +                     .enable_mask = BUCK1_ENMODE_MASK,
> > > > +                     .enable_val = BUCK_ENMODE_ONREQ,
> > > > +                     .ramp_mask = BUCK1_RAMP_MASK,
> > > > +                     .ramp_delay_table =
> > >
> > > pca9450_dvs_buck_ramp_table,
> > >
> > > > +                     .n_ramp_values =
> > >
> > > ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
> > >
> > > > +                     .owner = THIS_MODULE,
> > > > +                     .of_parse_cb = pca9450_set_dvs_levels,
> > > > +             },
> > > > +             .dvs = {
> > > > +                     .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
> > > > +                     .run_mask = BUCK1OUT_DVS0_MASK,
> > > > +                     .standby_reg =
> PCA9450_REG_BUCK1OUT_DVS1,
> > > > +                     .standby_mask = BUCK1OUT_DVS1_MASK,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "buck1_trim",
> > > > +                     .of_match = of_match_ptr("BUCK1"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_BUCK1,
> > > > +                     .ops = &pca9450_dvs_buck_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_BUCK1_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_trim_dvs_buck_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_trim_dvs_buck_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_BUCK1OUT_DVS0,
> > > > +                     .vsel_mask = BUCK1OUT_DVS0_MASK,
> > > > +                     .enable_reg = PCA9450_REG_BUCK1CTRL,
> > > > +                     .enable_mask = BUCK1_ENMODE_MASK,
> > > > +                     .enable_val = BUCK_ENMODE_ONREQ,
> > > > +                     .ramp_mask = BUCK1_RAMP_MASK,
> > > > +                     .ramp_delay_table =
> > >
> > > pca9450_dvs_buck_ramp_table,
> > >
> > > > +                     .n_ramp_values =
> > >
> > > ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
> > >
> > > > +                     .owner = THIS_MODULE,
> > > > +                     .of_parse_cb = pca9450_set_dvs_levels,
> > > > +             },
> > > > +             .dvs = {
> > > > +                     .run_reg = PCA9450_REG_BUCK1OUT_DVS0,
> > > > +                     .run_mask = BUCK1OUT_DVS0_MASK,
> > > > +                     .standby_reg =
> PCA9450_REG_BUCK1OUT_DVS1,
> > > > +                     .standby_mask = BUCK1OUT_DVS1_MASK,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "buck2",
> > > > +                     .of_match = of_match_ptr("BUCK2"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_BUCK2,
> > > > +                     .ops = &pca9450_dvs_buck_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_BUCK2_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_dvs_buck_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_dvs_buck_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_BUCK2OUT_DVS0,
> > > > +                     .vsel_mask = BUCK2OUT_DVS0_MASK,
> > > > +                     .enable_reg = PCA9450_REG_BUCK2CTRL,
> > > > +                     .enable_mask = BUCK2_ENMODE_MASK,
> > > > +                     .enable_val =
> BUCK_ENMODE_ONREQ_STBYREQ,
> > > > +                     .ramp_mask = BUCK2_RAMP_MASK,
> > > > +                     .ramp_delay_table =
> > >
> > > pca9450_dvs_buck_ramp_table,
> > >
> > > > +                     .n_ramp_values =
> > >
> > > ARRAY_SIZE(pca9450_dvs_buck_ramp_table),
> > >
> > > > +                     .owner = THIS_MODULE,
> > > > +                     .of_parse_cb = pca9450_set_dvs_levels,
> > > > +             },
> > > > +             .dvs = {
> > > > +                     .run_reg = PCA9450_REG_BUCK2OUT_DVS0,
> > > > +                     .run_mask = BUCK2OUT_DVS0_MASK,
> > > > +                     .standby_reg =
> PCA9450_REG_BUCK2OUT_DVS1,
> > > > +                     .standby_mask = BUCK2OUT_DVS1_MASK,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "buck4",
> > > > +                     .of_match = of_match_ptr("BUCK4"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_BUCK4,
> > > > +                     .ops = &pca9450_buck_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_BUCK4_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_buck_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_buck_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_BUCK4OUT,
> > > > +                     .vsel_mask = BUCK4OUT_MASK,
> > > > +                     .enable_reg = PCA9450_REG_BUCK4CTRL,
> > > > +                     .enable_mask = BUCK4_ENMODE_MASK,
> > > > +                     .enable_val = BUCK_ENMODE_ONREQ,
> > > > +                     .owner = THIS_MODULE,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "buck5",
> > > > +                     .of_match = of_match_ptr("BUCK5"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_BUCK5,
> > > > +                     .ops = &pca9450_buck_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_BUCK5_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_buck_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_buck_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_BUCK5OUT,
> > > > +                     .vsel_mask = BUCK5OUT_MASK,
> > > > +                     .enable_reg = PCA9450_REG_BUCK5CTRL,
> > > > +                     .enable_mask = BUCK5_ENMODE_MASK,
> > > > +                     .enable_val = BUCK_ENMODE_ONREQ,
> > > > +                     .owner = THIS_MODULE,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "buck6",
> > > > +                     .of_match = of_match_ptr("BUCK6"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_BUCK6,
> > > > +                     .ops = &pca9450_buck_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_BUCK6_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_buck_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_buck_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_BUCK6OUT,
> > > > +                     .vsel_mask = BUCK6OUT_MASK,
> > > > +                     .enable_reg = PCA9450_REG_BUCK6CTRL,
> > > > +                     .enable_mask = BUCK6_ENMODE_MASK,
> > > > +                     .enable_val = BUCK_ENMODE_ONREQ,
> > > > +                     .owner = THIS_MODULE,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "ldo1",
> > > > +                     .of_match = of_match_ptr("LDO1"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_LDO1,
> > > > +                     .ops = &pca9450_ldo_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_LDO1_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_ldo1_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_ldo1_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_LDO1CTRL,
> > > > +                     .vsel_mask = LDO1OUT_MASK,
> > > > +                     .enable_reg = PCA9450_REG_LDO1CTRL,
> > > > +                     .enable_mask = LDO1_EN_MASK,
> > > > +                     .owner = THIS_MODULE,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "ldo4",
> > > > +                     .of_match = of_match_ptr("LDO4"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_LDO4,
> > > > +                     .ops = &pca9450_ldo_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_LDO4_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_ldo34_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_ldo34_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_LDO4CTRL,
> > > > +                     .vsel_mask = LDO4OUT_MASK,
> > > > +                     .enable_reg = PCA9450_REG_LDO4CTRL,
> > > > +                     .enable_mask = LDO4_EN_MASK,
> > > > +                     .owner = THIS_MODULE,
> > > > +             },
> > > > +     },
> > > > +     {
> > > > +             .desc = {
> > > > +                     .name = "ldo5",
> > > > +                     .of_match = of_match_ptr("LDO5"),
> > > > +                     .regulators_node = of_match_ptr("regulators"),
> > > > +                     .id = PCA9450_LDO5,
> > > > +                     .ops = &pca9450_ldo_regulator_ops,
> > > > +                     .type = REGULATOR_VOLTAGE,
> > > > +                     .n_voltages = PCA9450_LDO5_VOLTAGE_NUM,
> > > > +                     .linear_ranges = pca9450_ldo5_volts,
> > > > +                     .n_linear_ranges =
> > >
> > > ARRAY_SIZE(pca9450_ldo5_volts),
> > >
> > > > +                     .vsel_reg = PCA9450_REG_LDO5CTRL_H,
> > > > +                     .vsel_mask = LDO5HOUT_MASK,
> > > > +                     .enable_reg = PCA9450_REG_LDO5CTRL_H,
> > > > +                     .enable_mask = LDO5H_EN_MASK,
> > > > +                     .owner = THIS_MODULE,
> > > > +             },
> > > > +     },
> > > > +};
> > > > +
> > > >
> > > >  static irqreturn_t pca9450_irq_handler(int irq, void *data)  {
> > > >
> > > >       struct pca9450 *pca9450 = data;
> > > >
> > > > @@ -708,8 +917,9 @@ static int pca9450_i2c_probe(struct i2c_client
> > > > *i2c)
> > > >
> > > >       const struct pca9450_regulator_desc     *regulator_desc;
> > > >       struct regulator_config config = { };
> > > >       struct pca9450 *pca9450;
> > > >
> > > > -     unsigned int device_id, i;
> > > > +     unsigned int device_id, i, val;
> > > >
> > > >       unsigned int reset_ctrl;
> > > >
> > > > +     bool pmic_trim = false;
> > > >
> > > >       int ret;
> > > >
> > > >
> > > >
> > > >       if (!i2c->irq) {
> > > >
> > > > @@ -721,6 +931,22 @@ static int pca9450_i2c_probe(struct
> > > > i2c_client
> > > > *i2c)
> > > >
> > > >       if (!pca9450)
> > > >
> > > >               return -ENOMEM;
> > > >
> > > >
> > > >
> > > > +     pca9450->regmap = devm_regmap_init_i2c(i2c,
> > > > +
> > >
> > > &pca9450_regmap_config);
> > >
> > > > +     if (IS_ERR(pca9450->regmap)) {
> > > > +             dev_err(&i2c->dev, "regmap initialization failed\n");
> > > > +             return PTR_ERR(pca9450->regmap);
> > > > +     }
> > > > +
> > > > +     ret = regmap_read(pca9450->regmap, PCA9450_REG_PWRCTRL,
> > >
> > > &val);
> > >
> > > > +     if (ret) {
> > > > +             dev_err(&i2c->dev, "Read device id error\n");
> > > > +             return ret;
> > > > +     }
> > > > +
> > > > +     if (val & PCA9450_REG_PWRCTRL_TOFF_DEB)
> > > > +             pmic_trim = true;
> > >
> > >
> > >
> > > PCA9450_REG_PWRCTRL is a read/write register. How is it possible to
> > > detect a chip revision using a bit which can be changed by software e.g.
> > > bootloader? Despite that this bit sets debounce time for
> > > PMIC_ON_REQ, how is this related to BUCK1 voltage range?
> >
> > There are old and new two kind PMIC pca9451a.
>
> There is only one part mentioned in the ordering options. How can I
> distinguish them? Any chip ID, date codes, markings?
Yes, there is only one part. We distinguish the new and old part by this bit Toff_Deb of
PCA9450_REG_PWRCTRL reset value. The reset value 0 means it's old part, and the reset
value 1 means it's new part.
>
> > This bit sets debounce time in
> > PCA9450_REG_PWRCTRL was set different value by hardware in order to
> > only distinguish the old and new PMIC. This bit isn't related to the
> > BUCK1 voltage range. If the pmic_trim is true that means it's new pca9451a.
>
> But this bit is writable. How do you know it has not been modified since reset?
Yes, we don't consider modify the debounce bit case. Modify the Toff_deb value will influence the old and new part judgement.

For example, this default value of Toff_deb is 1 in the new part, if the customers change the Toff_deb value from 1 to 0, and then make the board warm reset, the Toff_deb value still keep 0, if the Toff_deb value is 0, the PMIC driver will think this part is old part. But this part is new part in fact.

Have discussed this issue with our internal team member, we will add a note to PCA9451 datasheet – “Please contract NXP If you want to change Toff_deb.” But till now, we am not aware any customers case which need to adjust Toff_deb.

Make it more clear: If customers do need to manually adjust Toff_deb, It need PMIC driver update to bypass this bit check and directly apply corresponding voltage config table old or new.
Thank you very much!
BR
Joy Zou

>
> Best regards,
> Alexander
>
> > > > +
> > > >
> > > >       switch (type) {
> > > >       case PCA9450_TYPE_PCA9450A:
> > > >
> > > >               regulator_desc = pca9450a_regulators; @@ -730,6
> > > > +956,10
> > > >
> > > > @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
> > > >
> > > >               regulator_desc = pca9450bc_regulators;
> > > >               pca9450->rcnt = ARRAY_SIZE(pca9450bc_regulators);
> > > >               break;
> > > >
> > > > +     case PCA9450_TYPE_PCA9451A:
> > > > +             regulator_desc = pca9451a_regulators;
> > > > +             pca9450->rcnt = ARRAY_SIZE(pca9451a_regulators);
> > > > +             break;
> > > >
> > > >       default:
> > > >
> > > >               dev_err(&i2c->dev, "Unknown device type");
> > > >               return -EINVAL;
> > > >
> > > > @@ -741,13 +971,6 @@ static int pca9450_i2c_probe(struct
> > > > i2c_client
> > > > *i2c)
> > > >
> > > >
> > > >
> > > >       dev_set_drvdata(&i2c->dev, pca9450);
> > > >
> > > >
> > > >
> > > > -     pca9450->regmap = devm_regmap_init_i2c(i2c,
> > > > -
> > >
> > > &pca9450_regmap_config);
> > >
> > > > -     if (IS_ERR(pca9450->regmap)) {
> > > > -             dev_err(&i2c->dev, "regmap initialization failed\n");
> > > > -             return PTR_ERR(pca9450->regmap);
> > > > -     }
> > > > -
> > > >
> > > >       ret = regmap_read(pca9450->regmap, PCA9450_REG_DEV_ID,
> > >
> > > &device_id);
> > >
> > > >       if (ret) {
> > > >
> > > >               dev_err(&i2c->dev, "Read device id error\n"); @@
> > > > -756,7
> > > >
> > > > +979,8 @@ static int pca9450_i2c_probe(struct i2c_client *i2c)
> > > >
> > > >
> > > >
> > > >       /* Check your board and dts for match the right pmic */
> > > >       if (((device_id >> 4) != 0x1 && type ==
> > > > PCA9450_TYPE_PCA9450A) ||
> > > >
> > > > -         ((device_id >> 4) != 0x3 && type ==
> PCA9450_TYPE_PCA9450BC))
> > >
> > > {
> > >
> > > > +         ((device_id >> 4) != 0x3 && type ==
> > > > + PCA9450_TYPE_PCA9450BC)
> > > >
> > > ||
> > > ||
> > > > +         ((device_id >> 4) != 0x9 && type ==
> > > > + PCA9450_TYPE_PCA9451A)) {
> > > >
> > > >               dev_err(&i2c->dev, "Device id(%x) mismatched\n",
> > > >
> > > >                       device_id >> 4);
> > > >
> > > >               return -EINVAL;
> > > >
> > > > @@ -767,7 +991,16 @@ static int pca9450_i2c_probe(struct
> > > > i2c_client
> > > > *i2c)
> > > >
> > > >               struct regulator_dev *rdev;
> > > >               const struct pca9450_regulator_desc *r;
> > > >
> > > >
> > > >
> > > > -             r = &regulator_desc[i];
> > > > +             if (type == PCA9450_TYPE_PCA9451A &&
> > > > +                 !strcmp((&regulator_desc[i])->desc.name,
> > > > + "buck1") &&
> > >
> > > pmic_trim) {
> > >
> > > > +                     r = &regulator_desc[i + 1];
> > > > +                     i = i + 1;
> > > > +             } else if (type == PCA9450_TYPE_PCA9451A &&
> > > > +                        !strcmp((&regulator_desc[i])->desc.name,
> > >
> > > "buck1")) {
> > >
> > > > +                     r = &regulator_desc[i];
> > > > +                     i = i + 1;
> > >
> > >
> > >
> > > I would put this in a single 'type == PCA9450_TYPE_PCA9451A' branch,
> > > to indicate that only PCA9451A needs some kind of special handling.
> >
> > Yes, this makes the logic clearer. I will change in next version.
> >
> > >
> > >
> > > > +             } else
> > > > +                     r = &regulator_desc[i];
> > > >
> > > >               desc = &r->desc;
> > > >
> > > >
> > > >
> > > >               config.regmap = pca9450->regmap; @@ -847,7 +1080,8
> > >
> > > @@
> > >
> > > > static int pca9450_i2c_probe(struct i2c_client *i2c)
> > > >
> > > >       }
> > > >
> > > >
> > > >
> > > >       dev_info(&i2c->dev, "%s probed.\n",
> > > >
> > > > -             type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
> > >
> > > "pca9450bc");
> > >
> > > > +             type == PCA9450_TYPE_PCA9450A ? "pca9450a" :
> > > > +             (type == PCA9450_TYPE_PCA9451A ? "pca9451a" :
> > >
> > > "pca9450bc"));
> > >
> > > >
> > > >
> > > >       return 0;
> > > >
> > > >  }
> > > >
> > > > @@ -865,6 +1099,10 @@ static const struct of_device_id
> > > > pca9450_of_match[] = { .compatible = "nxp,pca9450c",
> > > >
> > > >               .data = (void *)PCA9450_TYPE_PCA9450BC,
> > > >
> > > >       },
> > > >
> > > > +     {
> > > > +             .compatible = "nxp,pca9451a",
> > > > +             .data = (void *)PCA9450_TYPE_PCA9451A,
> > > > +     },
> > > >
> > > >       { }
> > > >
> > > >  };
> > > >  MODULE_DEVICE_TABLE(of, pca9450_of_match); diff --git
> > > >
> > > > a/include/linux/regulator/pca9450.h
> > > > b/include/linux/regulator/pca9450.h index
> > > > 3c01c2bf84f5..5dd79f52165a
> > > > 100644
> > > > --- a/include/linux/regulator/pca9450.h
> > > > +++ b/include/linux/regulator/pca9450.h
> > > > @@ -9,6 +9,7 @@
> > > >
> > > >  enum pca9450_chip_type {
> > > >
> > > >       PCA9450_TYPE_PCA9450A = 0,
> > > >       PCA9450_TYPE_PCA9450BC,
> > > >
> > > > +     PCA9450_TYPE_PCA9451A,
> > > >
> > > >       PCA9450_TYPE_AMOUNT,
> > > >
> > > >  };
> > > >
> > > >
> > > >
> > > > @@ -93,6 +94,7 @@ enum {
> > > >
> > > >       PCA9450_MAX_REGISTER        = 0x2F,
> > > >
> > > >  };
> > > >
> > > >
> > > >
> > > > +#define PCA9450_REG_PWRCTRL_TOFF_DEB    BIT(5)
> > >
> > >
> > >
> > > Newline here please.
> >
> > Ok, will modify it.
> > Thank you very much for your comments and efforts.
> > BR
> > Joy Zou
> >
> > >
> > >
> > > Best regards,
> > > Alexander
> > >
> > >
> > >
> > > >  /* PCA9450 BUCK ENMODE bits */
> > > >  #define BUCK_ENMODE_OFF                      0x00
> > > >  #define BUCK_ENMODE_ONREQ            0x01
> > >
> > >
> > >
> > >
> > > --
> > > TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> > > Amtsgericht München, HRB 105018
> > > Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> > > http://www/
> > > .tq-%2F&data=05%7C01%7Cjoy.zou%40nxp.com%7C19989354bc054cffbfc
> b08db7
> > >
> d59888c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7C63824159
> 5727354
> > >
> 598%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMz
> IiLCJB
> > >
> TiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%7C&sdata=HBR3huCMS9N
> UdrmUBfs
> > > rbzr0Rlfy43g8i8ZH2v6blYw%3D&reserved=0
> > >
> group.com%2F&data=05%7C01%7Cjoy.zou%40nxp.com%7C1ecbe75c432d464
> > >
> cb45f08db61cb08bc%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7
> > >
> C638211296883052738%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw
> > >
> MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%
> > >
> 7C&sdata=mz7vtBiDvAxY9FO7tTZO3oPBA8zvYS6f8hLgAwrU8uk%3D&reserved
> > > =0
> > >
> > >
> >
> >
>
>
> --
> TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
> Amtsgericht München, HRB 105018
> Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
> http://www.tq-/
> group.com%2F&data=05%7C01%7Cjoy.zou%40nxp.com%7C19989354bc054cf
> fbfcb08db7d59888c%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0%7
> C638241595727354598%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAw
> MDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C3000%7C%7C%
> 7C&sdata=D71%2FiRInAUfBu2F32j4579TV0hwqMAWjM5gf%2Fx3xxdM%3D&r
> eserved=0
>



More information about the linux-arm-kernel mailing list