[PATCH] ARM: dts: imx1-apf9328: correct ethernet reg addresses (split)

[Krzysztof Kozlowski]

The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
 arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
index 77b21aa7a146..1f11e9542a72 100644
--- a/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx1-apf9328.dts
@@ -58,10 +58,8 @@ eth: eth at 4,c00000 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_eth>;
 		compatible = "davicom,dm9000";
-		reg = <
-			4 0x00c00000 0x2
-			4 0x00c00002 0x2
-		>;
+		reg = <4 0x00c00000 0x2>,
+		      <4 0x00c00002 0x2>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <14 IRQ_TYPE_LEVEL_LOW>;
 		fsl,weim-cs-timing = <0x0000c700 0x19190d01>;
-- 
2.34.1