[PATCH] arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq

Tim Harvey tharvey at gateworks.com
Wed Jul 12 09:13:49 PDT 2023


On Tue, Jun 6, 2023 at 8:32 AM Tim Harvey <tharvey at gateworks.com> wrote:
>
> Add regulator config for cpu-supply in order to support cpufreq.
>
> Signed-off-by: Tim Harvey <tharvey at gateworks.com>
> ---
>  .../dts/freescale/imx8mm-venice-gw7901.dts     | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> index df3b2c93d2d5..d022b5807a24 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw7901.dts
> @@ -242,6 +242,22 @@ reg_wifi: regulator-wifi {
>         };
>  };
>
> +&A53_0 {
> +       cpu-supply = <&buck2>;
> +};
> +
> +&A53_1 {
> +       cpu-supply = <&buck2>;
> +};
> +
> +&A53_2 {
> +       cpu-supply = <&buck2>;
> +};
> +
> +&A53_3 {
> +       cpu-supply = <&buck2>;
> +};
> +
>  &ddrc {
>         operating-points-v2 = <&ddrc_opp_table>;
>
> @@ -511,7 +527,7 @@ BUCK1 {
>                         };
>
>                         /* vdd_arm: 0.805-1.0V (typ=0.9V) */
> -                       BUCK2 {
> +                       buck2: BUCK2 {
>                                 regulator-name = "buck2";
>                                 regulator-min-microvolt = <700000>;
>                                 regulator-max-microvolt = <1300000>;
> --
> 2.25.1
>

Hi Shawn,

I noticed this and several other of my pending patches delegated to
you got marked as 'archived' and no longer appear as new in my
patchwork queue [1]. I wanted to make sure they are still in your
queue or see if I need to resubmit them. I'm not sure what the process
is that you follow and if they got archived by you or something else.
Please let me know if I need to do anything:

arm64: dts: imx8mm: add imx8mm-venice-gw73xx-0x-rpidsi overlay for display
arm64: dts: freescale: fix imx8mm-venice-gw72xx-0x-imx219 overlay
arm64: dts: freescale: Introduce imx8mp-venice-gw73xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW73xx-2x board
arm64: dts: freescale: Introduce imx8mp-venice-gw72xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW72xx-2x board
arm64: dts: freescale: Introduce imx8mp-venice-gw71xx-2x
dt-bindings: arm: Add Gateworks i.MX8M GW71xx-2x board
arm64: dts: freescale: Introduce imx8mm-venice-gw7905-0x
dt-bindings: arm: Add Gateworks i.MX8M GW7905-0x board
arm64: dts: imx8mm-venice-gw7904: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7903: disable disp_blk_ctrl
arm64: dts: imx8mm-venice-gw7904: enable UART1 hardware flow control
arm64: dts: imx8m{m,n}-venice-gw7902: add SDR50/SDR104 SDIO support for wifi
arm64: dts: imx8mm-venice-gw7901: add SDR50/SDR104 SDIO support for wifi
arm64: dts: imx8mm-venice-gw7901: add cpu-supply node for cpufreq
arm64: dts: imx8mp-venice-gw74xx: update to revB PCB

best regards,

Tim
[1] https://patchwork.kernel.org/project/linux-arm-kernel/list/?submitter=75211



More information about the linux-arm-kernel mailing list